GemTek Technology R950829G User Manual
BW1330
High Performance Hotspot Access Point
www.browan.com
User Guide
Version 1.0
September, 2006
Copyright©2006 BROWAN Communications, Inc.
Copyright
© 2002-2006 Browan Communications.
This user’s guide and the software described in it are copyrighted with all rights reserved. No part of
this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form by any means without the written permission of Browan
Communications.
Notice
Browan Communications reserves the right to change specifications without prior notice.
While the information in this manual has been compiled with great care, it may not be deemed an
assurance of product characteristics. Browan Communications shall be liable only to the degree
specified in the terms of sale and delivery.
The reproduction and distribution of the documentation and software supplied with this product and
the use of its contents is subject to written authorization from Browan Communications.
Trademarks
The product described in this book is a licensed product of Browan Communications.
Microsoft, Windows 95, Windows 98, Windows Millennium, Windows NT, Windows 2000, Windows
XP, and MS-DOS are registered trademarks of the Microsoft Corporation.
Novell is a registered trademark of Novell, Inc.
MacOS is a registered trademark of Apple Computer, Inc.
Java is a trademark of Sun Microsystems, Inc.
Wi-Fi is a registered trademark of Wi-Fi Alliance.
All other brand and product names are trademarks or registered trademarks of their respective
holders.
National Radio Regulations
The usage of wireless network components is subject to national and or regional regulations and laws.
Administrator must ensure that they select the correct radio settings according to their regulatory domain. Refer
B) Regulatory Domain/Channels chapter in the appendix to get more information on regulatory domains.
to the
Please check the regulations valid for your country and set the parameters concerning frequency, channel, and
output power to the permitted values!
BROWAN Page
1
The availability of some specific channels and/or operational frequency bands are
country dependent and are firmware programmed at the factory to match the
intended destination. The firmware setting is not accessible by the end user.
FCC Warning
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
CE Mark Warning
This is a Class A product. In a domestic
environment this product may cause radio
interference in which case the user may be required
to take adequate measures.
R&TTE Compliance Statement
This equipment complies with all the requirements
of the Directive 1999/5/EC of the European
Parliament and the Council of 9 March 1999 on
Radio Equipment and Telecommunication Terminal
Equipment and the Mutual Recognition of their
Conformity (R&TTE).
The R&TTE Directive repeals and replaces in the
directive 98/13/EEC (Telecommunications Terminal
Equipment and Satellite Earth Station Equipment)
As of April 8, 2000.
Safety
This equipment is designed with the utmost care for
the safety of those who install and use it. However,
special attention must be paid to the dangers of
electric shock and static electricity when working
with electrical equipment. All guidelines of this
manual and of the computer manufacturer must
therefore be allowed at all times to ensure the safe
use of the equipment.
FCC Caution
To assure continued compliance, any changes or
modifications not expressly approved by the party
responsible for compliance could void the user's
authority to operate this equipment
FCC Radiation Exposure Statement
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with minimum distance 20cm between
the radiator and your body. This transmitter must
not be co-located or operating in conjunction with
any other antenna or transmitter.
BROWAN Page
EU Countries Intended for Use
The ETSI version of this device is intended for
home and office use in Austria, Belgium, Denmark,
Finland, France (with Frequency channel
restrictions), Germany, Greece, Ireland, Italy,
Luxembourg, The Netherlands, Portugal, Spain,
Sweden and United Kingdom.
The ETSI version of this device is also authorized
for use in EFTA member states Iceland,
Liechtenstein, Norway and Switzerland.
EU Countries Not Intended for Use
None..
2
User’s Guide Version 1.0
Contents
Copyright.............................................................................................................................................1
Notice ..................................................................................................................................................1
Trademarks.........................................................................................................................................1
National Radio Regulations.................................................................................................................1
FCC Warning.......................................................................................................................................2
CE Mark Warning................................................................................................................................2
R&TTE Compliance Statement...........................................................................................................2
CONTENTS ............................................................................................................................................3
ABOUT THIS GUIDE..............................................................................................................................7
Purpose...............................................................................................................................................7
Prerequisite Skills and Knowledge......................................................................................................7
Conventions Used in this Document...................................................................................................7
Help Us to Improve this Document! ....................................................................................................7
Browan Communications Technical Support......................................................................................7
CHAPTER 1 – INTRODUCTION............................................................................................................8
Product Overview................................................................................................................................8
Management Options..........................................................................................................................8
The BW1330 Features........................................................................................................................9
CHAPTER 2 – INSTALLATION...........................................................................................................10
The Product Package........................................................................................................................10
Hardware Introduction.......................................................................................................................11
General Overview..........................................................................................................................11
Back Panel.....................................................................................................................................12
LEDs..............................................................................................................................................12
Connectors.....................................................................................................................................13
Stand..............................................................................................................................................14
Wall Mount.....................................................................................................................................14
Connecting the Access Controller.....................................................................................................15
Initialization........................................................................................................................................16
Access Your BW1330....................................................................................................................16
Software Introduction: KickStart ....................................................................................................17
Step by Step Setup ...........................................................................................................................20
CHAPTER 3 – UNIVERSAL ADDRESS TRANSLATION...................................................................23
What is UAT......................................................................................................................................23
UAT Principle ....................................................................................................................................23
UAT Limitation...................................................................................................................................23
CHAPTER 4 – USER PAGES (BASED ON XSL)................................................................................25
User Pages Overview........................................................................................................................25
Welcome Page...............................................................................................................................25
Login Page.....................................................................................................................................25
Logout Page...................................................................................................................................26
Help Page......................................................................................................................................27
Unauthorized Page........................................................................................................................27
Example for External Pages..........................................................................................................28
Example for Internal Pages ...........................................................................................................30
Extended UAM..................................................................................................................................33
Parameters Sent to WAS...............................................................................................................35
BROWAN Page
3
User’s Guide Version 1.0
CHAPTER 5 – CUSTOMIZED USER PAGE (HTML)..........................................................................39
Determine Your Access Policy..........................................................................................................39
Configure Authentication-Free Access Policy...................................................................................39
FAQ...................................................................................................................................................45
CHAPTER 6 – COMMAND LINE INTERFACE....................................................................................46
Introduction........................................................................................................................................46
Get Connection to CLI.......................................................................................................................46
Telnet Connection..........................................................................................................................46
SSH Connection ............................................................................................................................47
Terminal Connection......................................................................................................................47
Login..................................................................................................................................................47
Connection ........................................................................................................................................48
Network .............................................................................................................................................48
User...................................................................................................................................................51
Status ................................................................................................................................................52
System...............................................................................................................................................53
Telnet.................................................................................................................................................53
Reboot...............................................................................................................................................53
Reset.................................................................................................................................................53
Exit.....................................................................................................................................................53
CHAPTER 7 – SNMP MANAGEMENT................................................................................................54
Introduction........................................................................................................................................54
SNMP Versions.................................................................................................................................54
SNMP Agent......................................................................................................................................55
SNMP Community Strings.................................................................................................................55
Use SNMP to Access MIB.................................................................................................................55
BROAN Private MIB..........................................................................................................................56
CHAPTER 8 – REFERENCE MANUAL...............................................................................................57
Web Interface....................................................................................................................................57
Network Interface..............................................................................................................................59
Network Interface | Configuration | Interface Configuration...........................................................59
Network Interface | Configuration | Bridge.....................................................................................60
Network Interface | Configuration | VLAN......................................................................................62
Network Interface | Configuration | Route......................................................................................63
Network Interface | Configuration | Port Forwarding .....................................................................64
Network Interface | Configuration | DHCP Relay...........................................................................65
Network Interface | Configuration | User ACL................................................................................65
Network Interface | Configuration | Management Subnet..............................................................66
Network Interface | DNS................................................................................................................67
Network Interface | DHCP .............................................................................................................68
Network Interface | POP3..............................................................................................................70
Network Interface | RADIUS..........................................................................................................70
Network Interface | RADIUS | Settings..........................................................................................70
Network Interface | RADIUS | Servers...........................................................................................72
Network Interface | RADIUS | WISP..............................................................................................74
Network Interface | RADIUS | Proxy..............................................................................................75
Network Interface | RADIUS | Accounting Backup........................................................................76
Network Interface | Tunnels...........................................................................................................77
Network Interface | Tunnels | PPPoE/GRE ...................................................................................77
Network Interface | Tunnels | GRE Client for VPN........................................................................78
Network interface| wireless | Basic................................................................................................80
Network interface | wireless | Advance..........................................................................................82
Network Interface | Wireless | WDS ..............................................................................................85
Network interface | wireless | Sec WEP ........................................................................................86
BROWAN Page
4
User’s Guide Version 1.0
User Interface....................................................................................................................................87
User Interface | Configuration | Pages...........................................................................................87
User Interface | Configuration | Upload .........................................................................................88
User Interface | Configuration | Headers.......................................................................................88
User Interface | Configuration | Remote Authentication................................................................89
User Interface | Configuration | Custom Uam................................................................................89
User Interface | Administrator........................................................................................................94
User Interface | Start Page............................................................................................................95
User Interface | Walled Garden.....................................................................................................95
User Interface | Web Proxy............................................................................................................96
System...........................................................................................................................................97
System | Configuration | Syslog.....................................................................................................97
System | Configuration | Clock ......................................................................................................98
System | Configuration | NTP ........................................................................................................98
System | Configuration | Certificate...............................................................................................99
System | Configuration | Save and Restore.................................................................................100
System | Configuration | Domain Name ......................................................................................101
System | Configuration | Share Username..................................................................................102
System | Access | Access Control...............................................................................................102
System | Access | Telnet .............................................................................................................104
System | Access | AAA................................................................................................................104
System | Access | UAT................................................................................................................105
System | Access | Isolation..........................................................................................................106
System | Access | NAV................................................................................................................106
System | Access | SNMP.............................................................................................................106
System | Access | Web Auth........................................................................................................109
System | Access | Mac List..........................................................................................................110
System | Access | HTTPC ...........................................................................................................110
System | Status............................................................................................................................110
System | Reset.............................................................................................................................112
System | Update ..........................................................................................................................113
Connection ......................................................................................................................................115
Connection | Users ......................................................................................................................115
Connection | E-mail Redirection..................................................................................................117
Connection | Station Supervision.................................................................................................117
Built-In AAA.....................................................................................................................................118
Built-in AAA | E-Billing .................................................................................................................118
Built-in AAA | E-Billing | User Control..........................................................................................118
Built-in AAA | E-Billing | Band Class............................................................................................121
Built-in AAA | E-Billing | Bill setting..............................................................................................121
Built-in AAA | E-Billing| Power cut protection...............................................................................122
Built-in AAA | pre-paid .................................................................................................................123
Built-in AAA | pre-paid | user account..........................................................................................123
Built-in AAA | pre-paid | price/unit................................................................................................124
Built-in AAA | pre-paid | account life............................................................................................124
Built-in AAA | pre-paid | receipts..................................................................................................124
Built-in AAA | pre-paid | timeunit..................................................................................................125
Built-in AAA | pre-paid | account reminder...................................................................................125
Built-in AAA | pre-paid | manage net print ...................................................................................125
Built-in AAA | Configuration.........................................................................................................126
Built-in AAA | Configuration | Language......................................................................................126
Built-in AAA | Configuration | Backup and restore.......................................................................126
Built-in AAA | pre-paid | WEP key and SSID...............................................................................126
Built-in AAA | Configuration | title.................................................................................................126
APPENDIX..........................................................................................................................................128
A) Access Controller Specification..................................................................................................128
Technical Data.............................................................................................................................128
BROWAN Page
5
User’s Guide Version 1.0
B) Regulatory Domain/Channels.....................................................................................................130
C) CLI Commands and Parameters................................................................................................131
Network Commands....................................................................................................................131
User Commands..........................................................................................................................135
System Commands .....................................................................................................................137
Status Commands.......................................................................................................................140
Connection Commands ...............................................................................................................140
D) Location ID and ISO Country Codes..........................................................................................141
E) User Pages Templates Syntax...................................................................................................145
GLOSSARY........................................................................................................................................150
BROWAN Page
6
User’s Guide Version 1.0
About this Guide
Purpose
This document provides information and procedures on hardware installation, setup, configuration,
and management of the Browan Communications high performance hotspot access point model
BW1330. The BW1330 is a highly integrated Access Controller with built-in AAA systems for public
access hotspot. We will call it AC later in the manual.
Prerequisite Skills and Knowledge
To use this document effectively, you should have a working knowledge of Local Area Networking
(LAN) concepts and wireless Internet access infrastructures. In addition, you should be familiar with
the following:
Hardware installers should have a working knowledge of basic electronics and mechanical
assembly, and should understand related local building codes.
Network administrators should have a solid understanding of software installation procedures for
network operating systems under Microsoft Windows 95, 98, Millennium, 2000, NT, and Windows
XP and general networking operations and troubleshooting knowledge.
Conventions Used in this Document
The following typographic conventions and symbols are used throughout this document:
Very important information. Failure to observe this may result in damage.
Important information that should be observed.
bold
code
<value>
[value]
Additional information that may be helpful but which is not required.
Menu commands, buttons and input fields are displayed in bold
File names, directory names, form names, and system-generated output
such as error messages are displayed in constant-width type
Placeholder for certain values, e.g. user inputs
Input field format, limitations, and/or restrictions.
Help Us to Improve this Document!
If you should encounter mistakes in this document or want to provide comments to improve the
manual please send e-mail directly to:
manuals@browan.com
Browan Communications Technical Support
If you encounter problems when installing or using this product, please consult the Browan
Communications website at
Direct contact to the Browan Communications support centers.
Frequently Asked Questions (FAQ).
Download area for the latest software, user documentation and product updates.
BROWAN Page
http://www.browan.com/ for:
7
User’s Guide Version 1.0
Chapter 1 – Introduction
Thank you for choosing the Browan Communications High Performance Hopspot Access Point.
The BW1330 is a high performance and highly integrated Access Controller for public access
networks. It combines a high-speed wireless LAN Access Point, an IP Router, one LAN port and a
complete Access Controller for Wi-Fi Hotspot. One single BW1330 can serve up to 30 simultaneous
connected wireless client stations, takes control over authentication, accounting and routing to the
Internet as well as to the operator’s central network.
Product Overview
Authentication, Authorization & Accounting
The BW1330 supports multiple secure authentication methods from standard web browser login
(Universal Access Method), MAC authentication, to 802.1x/EAP with passwords, certificates or SIM
cards. The integrated real-time accounting system is based on standard RADIUS/EAP and supports
various billing plans from prepaid, pay-per-time, per-volume, per-use or flat rate. Integration into
existing OSS/BSS systems can be done with ease.
Service Differentiation
The integrated Web server of the BW1330 allows flexible interaction with common web appli cation
servers, facilitating the provisioning of differentiated services with bandwidth management, location
based and personalized services. Inter-Provider roaming and multi-OSS support is guaranteed by the
persistent usage of standardized protocols and interfaces like RADIUS, HTTPS and XML. As all
BW1330 are compliant with the recommendations of the Wi-Fi Alliance WISP roaming group.
Remote Control
The BW1330 is placed at the edge of a broadband access network and allows operators to provide
cost effective public Wi-Fi services, by managing per user access control, device configuration, and
radio performance centrally from the operations centre. HTTPs, telnet, SSH or SNMP over VPN can
be used for secure remote management.
Privacy
BW1330 supports different levels of security and data encryption. Client stations can be separated on
link layer (Layer2 User Isolation), preventing intruders from accessing the hard discs of other users.
User credentials (passwords) are protected by SSL or EAP-based authentication methods. User traffic
can be encrypted by VPNs (pass-through). Operators and service providers can make use of the
integrated VPN/tunneling protocols to protect AAA and management traffic.
Management Options
You can use the Access Controller management systems through the following interfaces:
Web-browser interface
Command Line interface (CLI)
Simple Network Management Protocol (SNMP v1, v2, v3)
The AC management system pages are organized the same way for the web-browser interfa ce an d
the CLI. This user manual provides detailed description of each management option.
BROWAN Page
8
User’s Guide Version 1.0
The BW1330 Features
WLAN
802.11b+g compliant, 1-54Mbps with auto-fallback
Wi-Fi compliant
Support Multiple BSSID up to 16 "Virtual AP"
Concurrent 802.11b and 802.11g access
WDS support (concurrent bridge and AP mode)
WPA/WPA2 (Wi-Fi Protected Access) support
R-TNC connectors for external antennas
RF output power
High receiver sensivity (up to -91 dBm@1Mbps, 8%PER)
AAA
Multiple authentication methods: UAM, 802.1x/EAP, RADIUS, MAC, Smart Client (e.g. iPass)
Per LAN/VLAN AAA, IP policies
WISPr compliant
Internal and external accounting backups
Internal or external web server
Remote user login, logout, session status control via https/XML
AAA proxy server (for simultaneous EAP and UAM)
Per user bandwidth management
Web proxy support
IP Router and IP address management
Static IP routing table
NAT/NAPT (IP masquerading)
Port-forwarding
802.1q VLAN support
Transparent VPN client pass-through (PPTP, IPsec ESP)
Selective source routing
PPPoE client
GRE Tunnel
DHCP server, relay gateway (suboptions), DHCP client
Multiple IP pools per user group
UAT (Universal Address Translation)
SMTP redirection (e-mail)
VPN
GRE VPN client
Ethernet port
One WAN port, One LAN port 10/100Mb, auto-sensing
Management
Secure management via https, SSH, SNMP
SNMP proxy
SNMPv3 (incl. authentication and encryption)
Management subnet for remote AP and switch management
Remote firmware update
BROWAN Page
9
User’s Guide Version 1.0
Chapter 2 – Installation
This chapter provides installation instructions for the hardware and software components of the
Access Controller BW1330. It also includes the procedures for the following tasks:
Hardware Introduction (LEDs, Connectors)
Connecting the Access Controller
First Configuration
Step-by-Step Setup
The Product Package
The Access Controller comes with the following:
High Performance Hopspot Access Point (model: BW1330)
Detachable Antennas (Dipole Antenna with R-TNC plug connector, 2 units)
External power supply (Input:100-240VAC, 50-60Hz, Output: 12VDC, 1 unit)
Ethernet Patch Cable (STP, 1.5 m length, 1 unit)
Installation CD containing:
BW1330 User Guide in PDF format
KickStart Utility
Product Firmware
Release Notes
Adobe Acrobat Readers
Printed Warranty Note(3 year)
Console cable
Screw bag
If any of these items are missing or damaged, please contact your reseller or
Browan Communications sales representative.
BROWAN Page
10
User’s Guide Version 1.0
Hardware Introduction
General Overview
Figure 1 –BW1330 Access Controller General View
The front panel of the Access Controller contains:
A series of indicator lights (LEDs) that help describe the state of various networking and
connection operations.
The reverse panel of the Access Controller contains:
Connectors which enable you to make different network connections for the controller
Reset button enables you to reboot or reset the device configuration to the factory defaults
Press the Reset button for less than 3 seconds to reboot the controller.
Press the Reset button for more than 10 seconds to set the controller to factory
defaults.
BROWAN Page
11
User’s Guide Version 1.0
Back Panel
Figure 2 – Back Panel of the BW1330
The back panel of the Access Controller contains:
Model and device name (see item 1 in figure above). The official device name is High
Performance Hopspot Access Point, model BW1330.
MAC address of the device. The label (item 2 in figure above) shows the LAN interface MAC
address of the device. You can determine the WAN and WLAN(Up to 16 MBSSID) interfaces’
MAC addresses by a simple calculation:
WAN interface MAC = LAN MAC + 1 (Hex)
WLAN(MBSSID) interface MAC = LAN MAC + 1 (Hex) by sequence up to 16 MAC
LEDs
The Access Controller has several LEDs located on the front panel:
Figure 3 – LEDs of the BW1330
BROWAN Page
12
User’s Guide Version 1.0
The various states of the LEDs indicate different networking and connection operations as follows:
Item LED Color Status Indication
1 Power
Orange On Writing to FLASH memory
4 LAN
Orange
WLAN Green
On system is active/working Green
Blinking system is booting
On PPPoE/PPTP/GRE tunnel for DSL is actived. 2 Online Green
Off PPPoE/PPTP/GRE tunnel for DSL is deactived.
On WAN active/working 3 WAN Green
Blinking Data transmitting
On 100 Mbps network connection exists Green
Blinking Data transmitting
On 10 Mbps network connection exists
Blinking Data transmitting
On WLAN active/working 5
Blinking Data transmitting
Connectors
The Access Controller has several connectors on the rear panel:
Figure 4 – Connectors
Descriptions of the connectors are given in the following table:
Item Connector Description
Power For power supply 1
2 Reset
3 WAN For Internet connection and PoE input
4 LAN
5 RS232 Console port
6 Antenna The MAIN antenna
7 Antenna The AUX antenna
BROWAN Page
Reboot or reset to factory defaults.
Press the reset button for less than 3 seconds to reboot the
controller. Press the reset button for more than 10 seconds
to set the controller to factory defaults
For enterprise applications use this port to connect your
company LAN, Intranet or to hotspot access points
13
User’s Guide Version 1.0
Stand
The BW1330 is designed standing on the desk or wall mount. Refer to the direction of red arrow to
release and insert the stand at the back of BW1330.
figure 5 – release stand figure 6 – insert stand
Wall Mount
BW1330 is also designed for wall mounting.Refer to the step 1 and step 2 to fix the stand on the wall
and lock the BW1330 on it.
figure 7 － wall mount
BROWAN Page
14
User’s Guide Version 1.0
Connecting the Access Controller
Use the following procedure to prepare your network connection to your BW1330.
Use the enclosed power adapter for power supply of your BW1330.
Step 1 Place the Access Controller on a flat work surface.
Step 2 Connect one Ethernet patch cable to the LAN port of the Access Controller and to
a free hub port on your local network.
Step 3 Connect the WAN port of the Access Controller to an Ethernet port of a broadband
Internet modem or router.
Step 4 Connect the power adapter to the Access Controller.
Step 5 Wait 30 seconds until the boot process is finished and check to ensure that at least
the following LEDs are ON:
Power LED (steady On)
WAN LED
LAN LED
WLAN link LED
BROWAN Page
15
User’s Guide Version 1.0
Initialization
This paragraph describes how to access the Web configuration interface of the BW1330. After
unpacking and connecting the product for the first time it responds to a dynamic IP addres s given by
the DHCP server on LAN or WLAN interface.
The default network settings for your new access controller are:
Ixp1(WAN) port: IP 192.168.2.66 subnet 255.255.255.0
Br1 IP 192.168.3.1 subnet 255.255.255.0
Ixp0 (LAN) port: In Bridge
WLAN1_0(first virtual AP): In Bridge
For other management methods: SNMP and command line interface (CLI) please
Access Your BW1330
After connecting the BW1330 device to network, try to access the BW1330 via one of the method:
Follow these instructions to access your BW1330 using the Web browser:
Step 1
refer to their respective chapters.
● Access your device via LAN connected by RJ-45 cat.5 cable or wirelessly connect to
BW1330 by default SSID “BW1330” without any encryption. Waitting for DHCP server to
give an IP address 192.168.3.x to your client PC. Open the Web browser and type the IP
address of the BW1330:
https://192.168.3.1/a.rg
● Configure your PC with a static IP address on the 192.168.2.x subnet with mask
255.255.255.0. Connect the BW1330 WAN interface into the same physical network as
your PC. Open the web browser and type the default IP address of the BW1330:
https://192.168.2.66/a.rg
Step 2 Enter the BW1330 administrator login details to access the Web management.
The default administrator log on settings for all access point interfaces are:
User Name: admin
Password: admin01
figure 8 login page
Step 3 After successful administrator log on you will see the main page of the access
controller’s Web interface:
BROWAN Page
16
User’s Guide Version 1.0
figure 9 administrator page
Software Introduction: KickStart
Another way is launch the KickStart utility that is provided with your product CD. The KickStart is
a software utility that is included on the Installation CD. The utility automatically detects access
points and access controllers installed on your network, regardless of its host IP address and lets
you configure each unit’s IP settings. The feature list for the KickStart utility is listed below:
Scanning your subnet for all connected APs, ACs
Quick access to your AC via HTTPS, telnet, SSH
Setting new IP address of your AC
Reset to factory default settings
Default access (in case of lost administrator password)
Firmware updates
To install the KickStart utility insert the Installation CD into your CD-ROM drive. Find and install the
utility from the product CD into the computer.
If the Installation CD does not start automatically, please run “autorun.exe”
manually from the root directory of the installation CD.
Step 1 Install the KickStart utility from the Installation CD. Click Start > Programs >
BROWAN > KickStart to launch the application. If the BW1330 device is
connected to your network, the utility will automatically find your AC:
BROWAN Page
17
User’s Guide Version 1.0
figure 10 kick start utility
Step 2 Select your controller and right click. Select Open WEB item to launch the web
management interface through the secure https connection:
figure 11 kick start utility
BROWAN Page
18
User’s Guide Version 1.0
Step 3 Enter the Access Controller administrator log on settings to access the web
management interface.
The default administrator log on settings for all controller interfaces are:
Step 4 After successful administrator log on you will see the controller web interface. The
figure 12 administrator page
Now you are enabled to perform the initial controller configuration. Follow the next section for step-bystep setup instruction to configure the device according to your needs.
User name: admin
Password: admin01
controller system statistics page is displayed by default:
If you cannot connect to the device via your web browser because of TCP/IP misconfiguration, you can reset the product to the factory default. Press the reset
button for more than 10 seconds.
BROWAN Page
19
Loading...