User's Manual11Mbps Wireless LAN Mini-PCI CardPage 1
11Mbps Wireless LAN Mini-PCI Card
Copyright statement
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, whether electronic, mechanical, photocopying, recording, or otherwise without the
prior writing of the publisher.
Printed in Taiwan, 2001/7/23
Page 2 11Mbps Wireless LAN Mini-PCI CardUser's Manual
11Mbps Wireless LAN Mini-PCI Card
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, (example - use only shielded interface cables
when connecting to computer or peripheral devices). Any changes or modifications not
expressly approved by the party responsible for compliance could void the user's authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
R&TTE Compliance Statement
User's Manual11Mbps Wireless LAN Mini-PCI CardPage 3
11Mbps Wireless LAN Mini-PCI Card
This equipment complies with all the requirements of the DIRECTIVE 1999/5/EC OF THE
EUROPEAN PARLIAMENT AND THE COUNCIL of 9 March 1999 on radio equipment and
telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE).
The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal
Equipment and Satellite Ea rth Station Equipment) As of April 8, 2000 .
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However,
special attention must be paid to the dangers of electric shock and static electricity when working with
electrical equipment. All guidelines of this manual and of the computer manufacturer must therefore be
allowed at all times to ensure the safe use of the equipment.
EU Countries intended for use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark,
Finland, France (with Frequency channel restrictions), Germany, Greece, Ireland, Italy, Luxembourg,
The Netherlands, Portugal, Spain, Sweden and United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member states Iceland,
Liechtenstein, Norway and Switzerland.
EU Countries Not intended for use
None.
Potential restrictive use
France: Only channels 10,11,12, and13
Page 4 11Mbps Wireless LAN Mini-PCI CardUser's Manual
7. Technical specifications of Wireless LAN ……………….………………..……….…………….…31
User's Manual11Mbps Wireless LAN Mini-PCI CardPage 5
11Mbps Wireless LAN Mini-PCI Card
2. Introduction
Thank you for purchasing your Wireless LAN, 11Mbps Wireless LAN Mini-PCI Card Card. This
manual will assist you with the installation procedure.
The package you have received should contain the following items:
• 11Mbps Wireless LAN Mini-PCI Card Card.
• User's Manual
• Quick installation guide
• Diskette containing Wireless LAN Management utility and drivers
Note: if anything is missing, please contact your vendor
The diskette contains the drivers and the program Configuration Utility that is used for managing the11Mbps Wireless LAN Mini-PCI Card Card and establishing the wireless connection with your Local
Area Network.
Page 6 11Mbps Wireless LAN Mini-PCI CardUser's Manual
11Mbps Wireless LAN Mini-PCI Card
3. Wireless LAN Basics
Wireless LAN (Local Area Networks) systems offer a great number of advantages over a traditional,
wired system. Wireless LANs (WLANs) are more flexible, easier to setup and manage and often more
cost effective than their wired equivalence.
Using radio frequency (RF) technology, WLANs transmit and receive data over the air, minimizing the
need for wired connections. Thus, WLANs combine data connectivity with user mobility, and, through
simplified configuration, enable movable LANs.
With wireless LANs, users can access shared information without looking for a place to plug in and
network managers can set up or augment networks without installing or moving wires. Wireless LANs
offer the following productivity, convenience and cost advantages over traditional wired networks:
• Mobility - Wireless LAN systems can provide LAN users with access to real-time information
anywhere in their organization. This mobility supports productivity and service opportunities not
possible with wired networks.
• Installation Speed and Simplicity - Installing a wireless LAN system can be fast and easy and can
eliminate the need to pull cable through walls and ceilings.
• Installation Flexibility - Wireless technology allows the network to go where wires cannot go.
• Reduced Cost-of-Ownership - While the initial investment required for wireless LAN hardware
might be higher than the cost of wired LAN hardware, overall installation expenses and life-cycle
costs will be significantly lower. Long-term cost benefits are greatest in dynamic environments
requiring frequent moves, adds, and changes.
• Scalability - Wireless LAN systems can be co nfigured in a variety of topo logies to meet the needs
of specific applications and installations. Configurations are easily changed and range from peerto-peer networks suitable for a small number of users to full infrastructure networks of thousands
of users that allows roaming over a broad area.
User's Manual11Mbps Wireless LAN Mini-PCI CardPage 7
11Mbps Wireless LAN Mini-PCI Card
4. Installation for Windows platform
The following section will assist you to in installing wireless LAN Adapter successfully. You will first
install software (driver) and then insert the 11Mbps Wireless LAN Mini-PCI Card Card, and finally
set the network properties to accommodate resource sharing and select the type of wireless network
that you wish to install. The Wireless LAN can easily be installed and used, without bothering to
connect cables for keeping your computer to use network resources, as in case of wired LAN.
Page 8 11Mbps Wireless LAN Mini-PCI CardUser's Manual
11Mbps Wireless LAN Mini-PCI Card
4.1. Installation Overview
Here are some steps you will perform in establishing your wireless ne twork connection:
Install the Access Point (AP) at first. AP is needed in case of Infrastructure network mode.
Install the software using the Installation Diskette.
Install the Wireless Mini-PCI Card (11Mbps Wireless LAN Mini-PCI Card Card).
Install the network protocol(s) required to communicate on your network. Most likely you will need
the TCP/IP protocol.
User's Manual11Mbps Wireless LAN Mini-PCI CardPage 9
11Mbps Wireless LAN Mini-PCI Card
4.2. Installation Procedure for Windows 98
Note: Do not insert the Mini-PCI card until you are asked to do so, failure of which may result in unsuccessful installation
of your 11Mbps Wireless LAN Mini-PCI Card card
Please follow the following steps one by one in order to install the MiniPCI card successfully.
1. Power on your computer and allow Windows 98 to load fully.
2. Be sure that there is no Mini-PCI adapter inserted yet.
3. Insert the given Installation CD in the CD-ROM.
4. Select ELAN (P-Series Driver) and then click on the Setup.
5. Accept the license agreement.
6. It takes a few seconds for copying the utility files and then click on Finish.
7. Restart the PC.
8. Insert Mini-PCI Card in the Mini-PCI slot, and complete setup according to detected instructions.
9. Find Mini-PCI in the CD-ROM and click on the Setup.
Page 10 11Mbps Wireless LAN Mini-PCI CardUser's Manual
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.