GemTek Technology LP1 User Manual
LAPLUG USER MANUAL
CLICK HERE TO ACCESS UP-TO-DATE ONLINE VERSION
of this document for the most recent content as well as for features such as expandable
illustrations, easier navigation, and search capability.
LaPlug User Manual LaCie 1
INTRODUCTION
Congratulations on your purchase of a LaPlug. This cutting-edge media adapter will
allow you to bring your existing storage devices onto the network, making stored
files available throughout the house.
This manual will guide you through the process of connecting your LaCie product to your network and will assist
you in troubleshooting any issues that might arise. If you encounter problems, check Getting Help. Note that
most user problems can be resolved by resetting the product to factory conditions (see Update Product
Software).
BOX CONTENT
■
Computer with an Ethernet network adapter
■
Latest version of Windows® XP, Windows Vista®, Windows 7/ Mac® OS X 10.5, 10.6 / Linux 2.6
■
Minimum free disk space: 600MB recommended
■
Ethernet switch or router
■
Wi-Fi access point for wireless connection
■
Web browsers: Internet Explorer® 7.0, Firefox® 3.0, Safari® 3.0, or Chrome 2.0 or higher
■
USB external hard disk or USB key
Important info: Please save your packaging. In the event that the drive should need to be repaired or
serviced, it must be returned in its original packaging.
MINIMUM SYSTEM REQUIREMENTS
■
Computer with a USB port and Ethernet network adapter
■
Latest version of Windows® XP; Windows Vista®, Windows 7 / Mac® OS X 10.5, 10.6 / Linux 2.6
■
Minimum free disk space: 600MB recommended
■
Ethernet switch or router 10/100/1000Mbits
■
Web browsers: Internet Explorer® 7.0, Firefox® 3.0, Safari® 3.0, or Chrome 2.0 or higher
LaPlug User Manual LaCie 2
VIEWS OF THE DRIVES
Front View
USB 2.0 device (USB key, external hard drive, printer, etc.)1.
Rear View
Power button1.
Power supply2.
Gigabit Ethernet3.
USB 2.0 devices (USB key, external hard drive, printer, etc.)4.
LaPlug User Manual LaCie 3
LED BEHAVIOR
The front LED changes to indicate different drive behavior. The following table sums up these behaviors.
State Indication
Solid blue Product is idle
Slow blinking blue Product is starting up
Solid red System is shutting down
USB power failure (see Installation)
Slow blinking red
Firmware upgrade failure
Slow blinking blue and red WiFi enabled but not connected to a network
Fast blinking blue and red Firmware upgrade in process
LaPlug User Manual LaCie 4
POWER BUTTON FUNCTIONS
■
Turn the product on: Push the power button until the front LED turns blue. Release the button and the LED
will flash blue. Then the product will boot, which may take up to two minutes. When the light becomes steady
blue, the product is ready to use.
■
Turn the product off: Press and hold the power button until the light slowly flashes blue. The product will
then:
■
Stop file transfers
■
Unmount volumes
■
Shut down
■
Restore Default Configuration: See Update Product Software.
Note: Another way to turn the product on or off is to use the Dashboard (see Administer the LaPlug).
LaPlug User Manual LaCie 5
INSTALLATION
This chapter explains how to connect your LaPlug to your network. Simply install LaCie Network Assistant, a
small utility which will help you to discover and configure your product, then connect the LaPlug to the network.
Follow the steps below to get your product up and running. After you finish installation, move on to Access USB
Devices or Administer the LaPlug.
Important info: Even if you intend to connect to the LaPlug using Wi-Fi, you must first connect it to your
network via the Ethernet cable in order to configure the wireless connection.
1 - CONNECT THE ETHERNET CABLE
Connect the Ethernet cable to the Ethernet port on the back of the product.1.
Connect the other end of the Ethernet cable into an available Ethernet port on your router or hub (refer to2.
your router or hub's documentation if necessary).
LaPlug User Manual LaCie 6
2 - CONNECT THE POWER SUPPLY
Connect the power supply to a wall outlet and to the product.1.
Push the power button until the front LED turns blue. Release the button and the LED will flash blue. Then the2.
product will boot, which may take up to two minutes. When the light becomes steady blue, the product is
ready to use.
LaPlug User Manual LaCie 7
Caution: Only use the power supply supplied with your specific LaCie product. Do not use a power supply
from another LaCie device or another manufacturer. Using any other power cable or power supply may
cause damage to the device and void your warranty. Always remove the AC adapter before transporting
your LaCie drive. Failure to remove the adapter may result in damage to your drive and will void your
warranty.
3 - CONNECT USB DEVICES
Connect USB storage devices to the LaPlug's USB ports.1.
Important info: USB power failure: If you connect hard drive(s) to the LaPlug that experience a USB failure,
the LED will blink red, all connected USB devices will become inaccessible, and you will receive an error on
the Dashboard. Simply remove the last connected device and then follow the instructions that appear on the
Dashboard.
Refer to USB Power Failure for more information.
LaPlug User Manual LaCie 8
4 - INSTALL LACIE NETWORK ASSISTANT
Lacie Network Assistant detects all LaCie network-attached storage devices on your network and gives you easy
ways to connect to or configure them.
Note: If you've installed LaCie Network Assistant before purchasing this LaCie product, make sure that
you've downloaded and installed the latest version from the LaCie website.
Insert the CD-ROM into your computer's CD-ROM drive.1.
Windows users, the CD should appear in My Computer or Computer. Mac users, the CD should appear on2.
the Desktop. Double-click the CD icon, then double-click LaCie Network Assistant Setup.
Follow the Wizard to complete installation.3.
Note: After you finish installation, move on to Access USB Devices or Administer the LaPlug.
LaPlug User Manual LaCie 9
ACCESS USB DEVICES
You have several options for accessing the USB devices you have connected to your LaCie product.
Note: See Advanced Accessibility Features for related features such as accessing your device remotely,
creating shortcuts to your USB devices on the network, and multimedia streaming.
OPTION 1
Launch LaCie Network Assistant.1.
■
Windows Users:
Select LaCie Network Assistant in Start/Programs. A Network Assistant icon will appear in the system1.
tray and LaCie Network Assistant will automatically detect your LaCie product on the network.
Right-click on the icon in the system tray.2.
■
Mac Users:
Select LaCie Network Assistant in your Applications folder. A Network Assistant icon will appear in the1.
system tray and LaCie Network Assistant will automatically detect your LaCie product on the network.
Click on the icon in the menu bar.2.
Under the heading LaPlug, choose the device you want to access.2.
LaPlug User Manual LaCie 10
The USB device will open in a Finder window (Mac) or an Explorer window (Windows).3.
If you are prompted for a username/password, enter your username and password (by default):4.
Username = admin
Password = admin
If you have changed the username/password from the default admin/admin (see Administer the LaPlug),
enter your new credentials.
Transfer files normally between your computer and the USB device. Mac users: If the USB device does not5.
open in a Finder window, simply navigate in the Finder to Network > LaPlug > [disk name].
LaPlug User Manual LaCie 11
Technical note: Error notices in LaCie Network Assistant instead of USB device listing:
If no USB device is recognized, instead of the USB device name, you will see the text Please connect a
USB device. Make sure your device is connected and that it has been formatted. Refer to your device's user
manual for formatting procedure.
If you see the text Connect Manually instead of the USB device name, click Connect Manually. A Finder
window (Mac) or Explorer window (PC) will open, listing all the USB devices connected to your LaPlug.
LaPlug User Manual LaCie 12
Technical note: Mac users: If the USB device does not open in a Finder window, simply navigate in the
Finder to Network > LaPlug > [disk name].
OPTION 2
Mac Users
In your Finder, navigate to Go > Connect to Server.1.
In the dialogue window that opens, type one of the following:2.
afp://laplug.local
smb://laplug.local
afp://[IP address]
smb://[IP address]
LaPlug User Manual LaCie 13
Windows XP Users
In an explorer window address field, type \\[Machine name] or \\[IP address]] and click Go. Alternatively,1.
from the Start menu, click Run, type \\[Machine name] or \\[IP address]] and click OK.
Windows 7 and Vista Users
In an explorer window address field, type \\[Machine name] or \\[IP address]] and hit enter.1.
LaPlug User Manual LaCie 14
OPTION 3
Launch LaCie Network Assistant.1.
■
Windows Users: Select LaCie Network Assistant in Start/Programs. A Network Assistant icon will appear
in the system tray and LaCie Network Assistant will automatically detect your LaCie product on the network.
■
Mac Users: Select LaCie Network Assistant in your Applications folder. A Network Assistant icon will
appear in the system tray and LaCie Network Assistant will automatically detect your LaCie product on the
network.
Right-click the icon in the system tray (Windows) or click the icon in the menu bar (Mac) and select2.
Configuration Window.
Select the LaPlug from the list of devices in the left-hand column, then click the Volumes tab.3.
Double-click the USB device you wish to access. The USB device will open in a Finder window (Mac) or an4.
Explorer window (Windows). Transfer files normally from your computer to the USB device.
Technical note: Mac users: If the USB device does not open in a Finder window, simply navigate in the
Finder to Network > LaPlug > [disk name].
LaPlug User Manual LaCie 15
ADMINISTER THE LAPLUG
The LaCie LaPlug features an easy-to-use browser-based tool for configuring the drive called the Dashboard.
DASHBOARD - ACCESSING
There are two ways to access the Dashboard, using the LaCie Network Assistant and using a browser.
Use LaCie Network Assistant
Click on the LaCie Network Assistant icon in the system tray (Windows users) or menu bar (Mac users) and1.
select LaPlug > Web Access.
The LaCie LaPlug login page will open in a new browser window or tab. If your browser is not open, LaCie2.
Network Assistant will open it for you.
In the login prompt, enter your username and password (case sensitive; default is admin/admin).3.
Click Log in.4.
LaPlug User Manual LaCie 16
Use a Browser
Open your Internet browser (Firefox, Internet Explorer, Safari, etc.) and type your LaCie LaPlug's IP address or1.
machine name (by default, LaPlug) in the browser's URL (web address) field.
For example: http://[IP-address] or http://LaPlug (Windows) http://LaPlug.local (Mac)
In the login prompt, enter your username and password (case sensitive; default is admin/admin).2.
Click Log in.3.
Technical note: Find your device's IP address in the LaCie Network Assistant Configuration Window.
DASHBOARD - HOME
The welcome page contains links to helpful documents from the LaCie website and a list of the different pages
that make up the Dashboard.
LaPlug User Manual LaCie 17
Restart or Shutdown
To restart or shut down the drive, click this button, then choose between Restart and Shutdown.
DASHBOARD - NAVIGATION
The Dashboard is made up of a central area surrounded by widgets, or small boxes that represent the different
pages that make up the Dashboard. The widget displays a summary of the information contained in the page.
For full information, navigate to the page itself.
■
To navigate to a page, click the widget below its title; or, drag and drop a widget to the center of the
window.
■
To minimize a widget, click the X next to its title.
■
To expand a minimized widget, drag its icon over an expanded widget or to an open widget space.
■
To rearrange widgets, drag the minimized widget icon or the expanded widget's heading onto the place of
another widget.
LaPlug User Manual LaCie 18
DASHBOARD - DRIVES
This page will list all the USB devices connected to your LaPlug.
Every USB device will take up at least two rows in the table; the first row describes the disk, and its volumes (or
partitions) each take up an additional row(s). So a disk with a single partition will take up two rows, and a disk
with two partitions will take up three rows, etc.
■
Disk: This column will normally list the drive's manufacturer (or a graphical indication of free space for
partitions).
■
Volume: This column lists a button to unmount the disk or the name of the drive's partition.
■
Unmount: To prevent file system corruption, it's important to unmount a drive by clicking this button
before unplugging it.
■
Size: Indicates the drive's total capacity.
■
Used Space: Indicates how much of the disk's capacity is in use.
■
Free Space: Indicates how much of the disk's capacity is available.
■
File System: Indicates the drive's file system.
■
Master Volume: One of the attached drives must be designated as the master volume in order for the Media
Server feature to function. See Media Servers.
LaPlug User Manual LaCie 19
Loading...