Gems Sensors & Controls 19MR Specifications

KEYHOLE & SLOT FOR TWO
SIZE 6 MOUNTING SCREWS

G

H

L

COM/L2

1-7/16˝

(3.7 cm)

1-7/16˝

(3.7 cm)

1-1/2˝

(3.8 cm)

2-7/8˝ (7.3 cm)

120V 240V

LOAD

3-1/2˝ (8.9 cm)

4˝ (10.16 cm)

120V 240V COM/L2

XX19MR

Series

19MR

Mode of Operation
Direct

A – 11K
B – 19K

Enclosure

0 – None

Inverse

C – 11K
D – 19K

1 – NEMA 1 4 – NEMA 4

Series 19MR
Direct Motor Load of 30 Amps @ 240 VAC

Series 19MR controls are the ideal choice where pump up or pump down service
is necessary. This control eliminates the need for contactors because it can directly
handle motors up to 1 HP at 120 VAC, or motors up to 2 HP at 240 VAC.

Enclosures Optional
Output Contact Rating 30 amp @ 240 VAC
Powered Output Contact SPST 30 A at supply voltage (120 or 240 VAC)
Horsepower Range 1 hp for 120 VAC; 2 hp for 240 VAC
Terminals 3/16˝ spade lug on probe connections

1/4˝ spade lug on power connections

Primary Voltage 120 VAC or 240 VAC (+10%/-15%), 50/60 Hz
Secondary Voltage 11.0 VAC, 1.5 mA
Temperature -40°F to +150°F (-40°C to +65°C)
Approvals U.L. 508 File # E44426, Vol. 1 Sec. 6

How to Order

Use the Bold characters from the chart below to construct a product code.

Series 19MR

Applications

• Carbonators • Low-WaterCutoff

• Appliances • DirectMotorLoad

• Sumps

WARRICK CONDUCTIVITY SENSORS

Dimensions

Wiring

E-1 2

Caution: 19MR contacts are powered contacts. When power is
applied to the 19MR controller, power may be present on relay output
connections. Output voltage will be same as input voltage.

Visit www.GemsSensors.com for most current information.