Gems Sensors & Controls 163000 Specifications
Digital Bargraph Display Receivers 163000 Series
Gems Digital Bargraph Receivers improve the way you are able to visualize the data
being received from your liquid level transmitters. These new receivers display
liquid level information in digital numerals in conjunction with a 0-100% LED
bargraph readout. The numeric portion is a 1/2˝ 4-digit display that provides detailed
quantification of tank contents, while the bright LED bargraph represents the tank
contents as a bar length relative to the percentage of fluid volume within the tank.
If you have a non-linear tank, such as a sphere or a cylinder laying on its side, these
receivers are a blessing. They can be calibrated easily so that the digital and bargraph
displays will indicate accurate content information for “odd” shape tanks. See
“Linearization” below.
In addition to the dual visual displays, the Gems Bargraph Receiver features two
independent alarms with adjustable time delays, 10 amp auxiliary dry contacts and
easy user set-up. The receiver is available in component form for mounting into
custom enclosures or panels, or housed within a NEMA 4X enclosure.
Panel Mounted Versions
LEVEL INDICATORS – VISUAL
2 Independent Alarms with
adjustable time delays. Labels
are supplied and user applied.
Example of units measured:
Gallons, Liters, Pounds, etc.
Labels are supplied and user
applied.
ALARM
ACKNOWLEDGE
LO
GAL X 10
5 25 50 75 100
PERCENT
CALIBRATION ACCESS
HI
PRESS
Touch to acknowledge
alarm activation.
Large 4 Digit Numerical Display.
LED Bargraph represents
percentage of tank contents.
Calibration conveniently
GEMS MODEL 163000
DIGITAL RECEIVER
Imo Industries Inc.
Gems Sensors Division
Plainville, CT 06062-1198
Tel;. 860-747-3000
accessible from front of
panel (access plate is
supplied loose in a cloth
bag along with labels).
Linearization
Certain tanks, like a sphere or a cylinder laying on its side, are considered “NonLinear” in terms of volume versus tank height. In these cases this receiver may be
linearized according to your tank parameters so that the correct volume is displayed.
Any units may be displayed by the receiver. Gallons, inches, tons, cubic inches, liters
and etc.
The receiver uses a scheme where 9 points or 8 straight lines are used to calculate the
numbers to be displayed. These 8 lines approximate the curve of the non-linear tank.
Examples of Non-Linear Display Values.
1.Gallons in a spherical tank.
2.Gallons in a cylindrical tank laying down.
3.Pounds of liquid in a spherical tank.
4.Cubic meters in a conical shaped tank.
5.Gallons in a non-linear shaped tank.
IMPORTANT: Customer must supply a sounding table, capacity curve and/or tank
drawing for linearization of the digital bar graph display receiver.
Enclosed Versions
Specification
Input Signal 4-20mA, Proportional Voltage*, Serial
Accuracy Over Given Range ± 1.0%
Operating Voltage 24VDC or 115VAC
Operating Temperature 32°F to 122°F (0°C to 50°C)
Alarm Contacts, Load 10Amp, Dry Contact
Digital Readout 0000 to 9999
* Proportional voltage as produced by the non-signal conditioned Gems Liquid Level Transmitters
(Section H) and SureSite Transmitters (Section G).
Note: Customer alarms (High & Low) set upon request.
D -2 6
Visit www.GemsSensors.com for most current information.
163000 Series / p1of2 / 14-APR-14
Dimensions
Panel Mounting Recievers
"
3
ALARM
ACKNOWLEDGE
HI
LO
GAL X 10
5 25 50 75 100
PERCENT
"
5 3/4
CALIBRATION ACCESS
PRESS
GEMS MODEL 163000
DIGITAL RECEIVER
Imo Industries Inc.
Gems Sensors Division
Plainville, CT 06062-1198
Tel;. 860-747-3000
CUSTOMER'S
MOUNTING SURFACE
NEMA 4X Enclosed Receivers
ALARM
ACKNOWLEDGE
HI
LO
GAL X 10
5 25 50 75 100
PERCENT
CALIBRATION ACCESS
PRESS
GEMS MODEL 163000
DIGITAL RECEIVER
Imo Industries Inc.
Gems Sensors Division
Plainville, CT 06062-1198
Tel;. 860-747-3000
3 13/32"REF.
.156 DIA.
THRU
4-1/2˝ REF.
4 7/8
"
"
2.562
"
3/32
7/32
"
2 3/4
MOUNTING HOLES
(4X) FOR 1/4˝ BOLTS
"
5.312
RECEIVERS
"
Static Sensitive.
Handling Precautions Required.
Typical Installation
ALARM
ACKNOWLEDGE
LO
GAL X 10
5 25 50 75 100
PERCENT
CALIBRATION ACCESS
GEMS MODEL 163000
DIGITAL RECEIVER
Imo Industries Inc.
Gems Sensors Division
Plainville, CT 06062-1198
Tel;. 860-747-3000
163000 Series
Digital Receiver
HI
PRESS
Optional
Zener
Barrier
24 VDC
or
115 VAC
0.281 THRU CUSTOMER’S
MOUNTING SURFACE (4X)
6˝ REF.
11-1/4˝
REF.
4-1/2˝
REF.
How To Order - Standard
Select reciever type by Part Number based on Input Power and Input/Output Signals
required.
Input
Power
24 VDC
115 VAC
* Proportional voltage as produced by the non-signal conditioned Gems Liquid Level Transmitters (Sections C)
and SureSite Transmitters (Section D). When used in conjunction with RE-163000, no additional signal
conditioning required.
163000 Series / p2of2 / 14-APR-14
Input/Output Signals Part Number
Input Output Panel Mount
Transmitter* None
Serial None
Transmitter* 4-20mA
4-20mA
4-20mA
None
Transmitter* None
Serial None
Transmitter* 4-20mA
4-20mA
4-20mA
None
170680-0100 170690-0100
170681-0100 170691-0100
170682-0100 170692-0100
170683-0100 170693-0100
170684-0100 170694-0100
170685-0100 170695-0100
170686-0100 170696-0100
170687-0100 170697-0100
170688-0100 170698-0100
170689-0100 170699-0100
Visit www.GemsSensors.com for most current information.
NEMA 4X
Fiberglass
Enclosed
Gems Liquid
Level
Transmitter
LEVEL INDICATORS – VISUAL
D -2 7
Loading...