BLUETOOTH SOUNDBAR
MODEL: B-3318
USER MANUAL
Welcome1
2
3
40W 2.0 Compact Bluetooth Soundbar
2.1 In The Box
2.2 Front View
2.3 Top View
2.4 Rear View
2.5 Remote Control
Quick Setup
3.1 Power On/Off and Function Selection
3.2 Auto Power Off
3.3 Adjusting The Volume
Operation4
4.1 Selecting LINE IN
Selecting AUX IN
4.2
4.3
Selecting Bluetooth
4.4
Selecting OPTICAL IN
Troubleshooting5
Technical Specifications6
Safety Instructions & Warnings
Important Safety Instructions
• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
not defeat the safety purpose of the polarized or
• Do
grounding - type plug. A polarized plug has two blades wit
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. When the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
• Protect the power cord from bein
particularly
where they exit from the apparatus.
• Only use attachments/accessories specified by the
manufacturer.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is da
has been spilled or objects have fallen
the apparatus has been exposed to rain or moisture, doesnot
operate normally, or has been dropped.
• Use only with a cart, stand, tripod, bracket,
or table specofoed by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
at plugs, convenience receptacles, and the point
g walked on or pinched
maged, liquid
into the apparatus,
FCC Warnings
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance couldvoid the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment genera
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
h
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
encouraged to try to correct the interference
tes, uses, and can
Battery Warnings
• WARNING: Do not ingest the battery, Chemical Burn
Hazard.
• If the remote control supplied with this product contains a
coin/button cell battery and the coin/button cell battery is
swallowed, it can cause severe internal burns in just 2 hours
and can lead to death.
• Keep new and used batteries away from children. Iff the
battery compartment does not close securely, stop using the
product and keep it away from chil
dren.
• If you think batteries might have been swallowed or
placed inside and part of the body, seek immediate medical
attention.
• CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
• WARNING: There is a danger of explosion if you attempt
to charge standard Alkaline batteries in the unit. Only use
rechargeable NiMH batteries.
• Battery shall not be exposed to exce
ssive heat such as
sunshine, fire or the like.
• Do not mix old and new batteries.
• Completely replace all old batteries with new ones.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable
(ni-cad, ni-mh, etc) batteries.
• Batteries should be recycled or disposed of as per state and
local guidelines.
Additional Warnings and Precautions
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
• Mains
• CA UT I ON: Use of controls or ad justments or performance
• WARNING : Changes or modificationsto this unit not
• WARNING : Use of this unit near fluorescent l ighting may
• WARNING : Shock hazard - Do Not Open.
• Caution and marking information is located at the rear or
• WARNING : To reduce the risk of fire or electri c shock,
• Objects filled with liquids, such as vases, shall not be placed
• WARNING : This product may contain chemicals known
• This product meets and compli e
plug is used as disconnect device and it should remain
readily operable during intended use. In order to disconnect
the apparatus from the mains completely, the mains plug
should be disconnected from the mains socket outlet
completely.
of procedures other than those specified may result i n
hazardous radiati on exposure.
expressly
approved by the party responsi ble f or compli ance
coul d void the user’s authority to operate the equipment.
cause i nterference regarding use of the remote. If the unit i s
displayi ng erratic behavior move away from any fluorescent
lighting, as it may be the cause.
bottom of the appa
ratus.
do not expose this apparatus to rain, moisture, dripping, or
splashing.
on the apparatus.
to the State of Cali fornia to cause birth defects, or other
reproductive harm (Cali fornia Prop 65) . Wash hands after
handling.
s with all Federal regulati ons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
RISQUE D' LECTROCUTION
NE PAS OUVRIR
WARNI NG: To reduce the risk of electric
shock, do not remove cover (or back). No
user-serviceable parts inside. Refer servicing
to
qualified
service personnel.
The exclamation point within an equilateral
triangle i s intended to alert the user to
the presence of i mportant oper ating and
maintenance (servici ng) instructions in the
literature accompanying the appli ance.
The lightning flash wi th arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of un-insulated
“dangerous voltage” withi n the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
Thi s symbol indicates that this product
incorporates double i nsulati on between
hazardous mains voltage and user accessible
parts.
WARNI NG: This product can expose you to
chemicals including lead, which is known to
the State of California to cause cancer. For
more information go to: www.P65Warnings.
ca.gov
1
Welcome
Thank you for choosing this Goodmans product. We’ve been
making electronics for the British people for 70 years. Each of
our projects has been carefully designed to be great at what it
does and this one is no exception. We hope you enjoy your
new 40W 2.0 Compact Bluetooth Soundbar
Your 40W 2.0 COMPACT 2
BLUETOOTH SOUNDBAR
2.1
In The Box
Carefully remove your 40W 2.0 Compact Bluetootn Soundbar from the packaging.
Inside the box you will find:
• 40W Soundbar
• Power Adaptor
• Quick Start Guide
• Guarantee Booklet
If any of these items are missing, contact cust
Visit: www.goodmans.co.uk/support
• 3.5mm Line-in Cable
• 3.5mm To RCA Cable
• RCA To RCA Cable
omer support.
• Remote Control
•
Wall Mount Kit
Mains Power
Your 40W Soundbar requires a mains supply of 230-240V AC ~ 50Hz.
Please ensure that your mains supply is compatible before use.
Disconnect the Power Cord from the mains when not in use.
Position of 40W 2.0 Compact Soundbar
Place on a flat, stable surface that is not subject to vibrations. Avoid
the following locations:
• Where it is exposed to direct sunlight
• Where it is close to heat radiating sources
• Where the humidity is high and ventilation is
• Where it is dusty
poor
Front View2.2
A
SPEAKER
Top View2.3
A
A
E
F
POWER
Press to power soundbar on or off.
SOURCE
Press to select input.
VOLUME
Press to increase the volume.
PAIR
Touch and hold to begin pairing to a
external Bluetooth device.
VOLUME
Press to decrease the volume.
C
B
D
E
F
Rear View2.4
G DC MAINS INPUT SOCKET
Connect external mains adaptor to this socket.
CB
D
OPTICAL INPUT SOCKET
H
Connect external audio sources with optical audio cable.
AUX INPUT SOCKET
I
Connect external audio sources with RCA audio cable.
J
LINE IN SOCKET
Connect external audio sources with a 3.5mm audio cable.
G H I J
REMOTE CONTROL2.5
POWER
K
L
M
N
O
P
BT
OPTICAL
MOVIEMUSIC
MUTE
PAIRLINEAUX
VOICE
VOLUMEBASSTREBLE
VOLUMEBASSTREBLE
Q
R
S
T
U
V
POWER
K
Press to turn on/off.
BT
L
Press to select BT mode.
AUX
M
Press to select AUX mode.
DSP PRESETS
N
Press to acess to Music/Movie/Voice mode.
TREBLE
O
Increase or decrease the treble settings.
In BT mode
P
Press to Skip/Back/Play/Pause/Stop the track.
OPTICAL
Q
Press to select optical mode.
R
MUTE
LINE
S
Press to select Line in mode.
PAIR
T
Press to begin pairing with a Bluetooth device.
BASS
U
Increase or decrease bass settings.
VOLUME
V
Increase or decrease the volume.
Quick Setup3
3.1
Power On/Off and Function Selection
1. This 40W 2.0 Compact Bluetooth Soundbar is supplied with a mains adaptor.
To connect the power insert the small end in the rear of the unit.
2. Insert the UK plug into a household power socket, and
3. Press the button to turn the unit on.
4. Press the SOURCE button to select BLUETOOTH / LINE / AUX / OPTICAL mode.
switch the power on.
3.2
3.3
Auto Power Off
If no audio signal is continuously detected from the selectal mode in for more than 170 minutes,
the unit will power-off automatically.
Adjusting the Volume
Press the VOL+ button or VOL- button in the side panel of the soundbar to adjust the volume to
a comfortable level.
Operation4
4.1
4.2
4.3
Selecting LINE IN
1. Press the button in the top panel of the soundbar or alternatively press the
button on the remote control, so that the green LED is illuminated.
2. Press the Source button and select LINE IN mode or press the LINE IN button on your
remote control.
3. Adjust volume to the desired level.
Selecting AUX IN
1. Press the button in the top panel of the soundbar or alternatively press the
button on the remote control, so that the white LED is illuminated.
2. Press the Source button and select AUX IN mode or press the AUX button on your
remote control.
3. Adjust volume to the desired level.
Selecting Bluetooth
1. Press and hold the button on the unit or alternatively press the button on
the Remote Control.
2. Press the SOURCE button and select Bluetooth mode or press the BT button on
the Remote Control to switch Bluetooth mode.
4.4
Press the Source button on the unit .The blue light will flash quickly.
3.
Use the controls on your Bluetooth device to select ( B-3318 ) in your Bluetooth
4.
settings to pair. If your device requests a password, enter the “0000” . Refer to your
device's user manual for instuctions on pairing and connecting Bluetooth devices.
Selecting OPTICAL IN
1. Press the button in the top panel of the soundbar or alternatively press the
button on the remote control, so that the orange LED is illuminated.
2. Press the Source button and select OPTICAL mode or press the OPTICAL button
on your remote control.
3. Adjust volume to the desired level.
Troubleshooting5
Problem What to do
Soundbar does not respond
(no power).
No sound.
The Remote Control does not work.
No sound in Bluetooth mode.
Check the mains power cable and make sure it is
plugged into a suitable power outlet.
Check that the mains power supply is switched on.
Connect the power to a different power outlet.
Check the Soundbar volume control is not at minimum.
Check that the Soundbar is not set to MUTE.
If you are connecting to the Soundbar using a
headphones port on your extemal audio device then
check the volume is turned up on that device.
Replace the battery.
Make sure there are no obstacles obscuring the
Soundbar.
Check that the Soundbar is Paired with a Bluetooth
device. If prompted enter the code ‘0000’.
Technical Specification6
Power Supply
Power Source of Remote Control DC 3V, 1 x CR2025 Battery (supplied)
Power Consumption 40W
Audio Power
Impedance
AC 120V, 60 HZ.
Left Channel 20W
Right Channel 20W
1 x Left Channel 20W 8Ω
1 x Right Channel 20W 8Ω
Loading...