Gemini Technologies 748USA User Manual
INSTALLATION CERTIFICATE
The undersigned qualified installer attests to have personally fitted the device on the here
described vehicle following the manufacturer instructions.
CERTIFICATO D’INSTALLAZIONE
Il sottoscritto installatore certifica di aver eseguito personalmente l'installazione del dispositivo sul
veicolo descritto qui di seguito, come da istruzioni del fabbricante.
By :
Da :
726 - 726/5
Sold on :
Venduto il :
Vehicle :
Veicolo :
This product complies with the relevant requirements of DIRECTIVE 2014/53/EU and REGULATION No. 10.
Questo prodotto soddisfa i requisiti essenziali della DIRECTIVE 2014/53/EU e della REGULATION No. 10.
................................................
..........................................................................................................................
Device P/N:
Dispositivo :
726
726/5
748USA
&
748USA
INSTALLATION AND
USE MANUAL
MANUALE DI
INSTALLAZIONE ED USO
UK
IT
GEMINI Technologies S.r.l.
Via Luigi Galvani 12 - 21020 Bodio Lomnago (VA) - Italia
Tel. +39 0332 943211 - Fax +39 0332 948080
www.gemini-alarm.com
ISO 9001 Certified Company
Made in Italy
Rev.01 - 06/19
UK
Dear Customer, thank you for purchasing this Gemini product designed and manufactured
specifically for 2-wheeledvehicles. The ‘bike finder’ comes in 2 versionsand is supplied with
1 remote control748USA.
6-wire bike-finder/automatic seatopener (extra wirefor learning newremote controls).
726:
726/5:
5-wire bike-finder/automatic seatopener.
1.0 - INTRODUCTORY NOTE
USER MANUAL
2.0 - OPERATING PROCEDURE (726 & 726-5)
REMOTE SEAT OPENER: To automatically unlock the seat catch, press button “1” for
approx. 1 sec. The seat actuator will trigger the lock mechanism and the turn indicators
will flash once.
BIKE FINDER MODE: The bike finder mode is particularly useful in a crowded parking lot.
To access the bike finder mode, while within range of your bike (approx. 50m), proceed as
follows:
1. Press remotecontrol button “2”.
2. Turn indicators willflash twice.
3. If youpress and holdbutton “2”, theturn indicators willflash until the button isreleased.
4.0 - ENERGY SAVER FEATURE “STANDBY MODE”
In order to preserve battery life, the system automatically reverts to standby mode after 3
min. of inactivity. The receiver will wake up every 3 sec. and stay in active mode for 0.2 sec.
before going backto sleep.
Towake up the system press remotecontrol button “1”or “2” forapprox.3 sec.
5.0 - HOW TO LEARN A NEW REMOTE CONTROL
!
Tolearn a new remote control proceedas follows:
!
Cycle ignition key“OFF” and “ON”5 times ina row.
!
Within 5 sec.,simultaneously press, twicein a row,remote control buttons“1”and “2”.
!
The turn indicators will flash once to confirm that the new remote control has been
paired.
!
Topair another remote control, repeat theabove steps.
The device memory will only store 4 remote controls.
Saving an extra device will automatically delete the first one.
726
3.0 - REMOTE CONTROL 748USA
BUTTON 1:
SEAT OPENER
BUTTON :
The remote control has a low charge battery indicator that gives early warning to avoid
malfunctioning. When the batteries are low, the LED will blink when one of the buttons is
pressed. Replace batteriesas follows:
1 2
1
Use only 2 CR2016 coin batteries and place them both (+) positive side up as shown
above. Inserting the batteries the wrong way and/or using different type batteries can
damage the remote control or cause the batteries to explode.
Discard used batteries properly in special dedicated containers.
N/A
3
2
3
3
BUTTON :2
BIKE FINDER MODE
BUTTON :
2x
N/A
4
4
4
726/5
Tolearn a new remote control proceedas follows:
!
Disconnect and immediatelyreconnect the motorcyclebattery.
!
Within 5 sec.,simultaneously press, twicein a row,remote control buttons“1” and “2”.
!
The turn indicators will flash once to confirm that the new remote control has been
paired.
!
Topair another remote control, repeat theabove steps.
6.0 - TECHNICAL SPECIFICATIONS
Power supply 726 & 726/5
Average current absorption in energy saver mode
Radio frequency
Drive current for turn indicator lamps
Drive current for seat unlock actuator
Reception (free field range)
Protection Index
7.0 - WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
(WEEE) DIRECTIVE
The present devicefalls within thescope of theWEEE Directive inforce.
9-16 Vdc
0.35 mA
433.92 MHz
6+6A
6A continuous
50m
IP67
PAGE 02
USER MANUAL - PAGE 03
Loading...