Gemini Sound TT-03 Owners manual
Super High Torque direct drive turntable
PLATTENSPIELER MIT DIREKTANTRIEB UND SUPER HOHEM DREHMOMENT
GIRADISCOS TOTALMENTE MANUAL SUPER HIGH TORQUE
PLATINE MANUELLE À ENTRAÎNEMENT DIRECT (SUPER HIGH T ORQUE)
OPERATIONS MANUAL
BEDIENUNGSHANDBUCH
MANUAL DEL OPERADOR
MANUEL D’INSTRUCTIONS
MULTI LANGUAGE INSTRUCTIONS
ENGLISH....................................................................................................................................................................................................................PAGE 4
DEUTSCH.............................................................................................................................................................................................................PAGE 6
ESPAÑOL...............................................................................................................................................................................................................PAGE 8
FRANCAIS.................................................................................................................................................................................................................PAGE 10
PLEASE READ BEFORE USING APPLIANCE, IMPORTANT WARNING & SAFETY INSTRUCTIONS!
CAUTION
RISK OF ELECTRICAL SHOCK DO NOT OPEN!
CAUTION: This product satisfies FCC regulations when shielded cables and connec-
tors are used to connect the unit to other equipment. To prevent electromagnetic
interference with electric appliances such as radios and televisions, use shielded
cables and connectors for connections.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The lightening flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
READ INSTRUCTIONS: All the safety and operating instructions should be read
before the product is operated.
RETAIN INSTRUCTIONS: The safety and operating instructions should be retained
for future reference.
HEED WARNINGS: All warnings on the product and in the operating instructions
should be adhered to.
FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.
CLEANING: The product should be cleaned only with a polishing cloth or a soft dry
cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids
since they may corrode the cabinet.
ATTACHMENTS: Do not use attachments not recommended by the product manu-
acturer as they may cause hazards.
WATER AND MOISTURE: Do not use this product near water, for example, near a
bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a
swimming pool; and the like.
ACCESSORIES: Do not place this product on an unstable cart, stand, tripod, brack-
et, or table. The product may fall, causing serious injury to a child or adult, and
serious damage to the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product. Any mounting of the
product should follow the manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
CART: A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the product and cart combination to overturn. See Figure A.
VENTILATION: Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from overheating, and
these openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s instructions have been
adhered to.
POWER SOURCES: This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
LOCATION: The appliance should be installed in a stable location.
NON-USE PERIODS: The power cord of the appliance should be unplugged from the
outlet when left unused for a long period of time.
GROUNDING OR POLARIZATION:
• If this product is equipped with a polarized alternating current line plug (a plug
having one blade wider than the other), it will fit into the outlet only one way. This
is a safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
• If this product is equipped with a three-wire grounding type plug, a plug having
a third (grounding) pin, it will only fit into a grounding type power outlet. This is a
safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
grounding type plug.
POWER-CORD PROTECTION: Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is con-
nected to the product, be sure the antenna or cable system is grounded so as to
provide some protection against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure B.
LIGHTENING: For added protection for this product during a lightening storm, or
when it is left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable system. This will prevent damage
to the product due to lightening and power-line surges.
POWER LINES: An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits
as contact with them might be fatal.
OVERLOADING: Do not overload wall outlets, extension cords, or integral conven-
ience receptacles as this can result in a risk of fire or electric shock.
OBJECT AND LIQUID ENTRY: Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock. Never spill liquid of any kind on the
product.
SERVICING: Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the following conditions:
• When the power-supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the product.
• If the product has been exposed to rain or water.
• If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an
improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to its normal operation.
• If the product has been dropped or damaged in any way.
• When the product exhibits a distinct change in performance, this indicates a
need for service.
REPLACEMENT PARTS: When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
SAFETY CHECK: Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the product is in
proper operating condition.
WALL OR CEILING MOUNTING: The product should not be mounted to a wall or
ceiling.
HEAT: The product should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce heat.
(2)
TT-003
(3)
INTRODUCTION:
Congratulations on purchasing a Gemini TT-03 fully manual
high torque turntable. This state of the art turntable includes the
latest features. Prior to use, we suggest that you carefully read
all the instructions.
FEATURES:
- Fully Manual Direct Drive Turntable
- Super high torque (2.2 kg) direct drive turntable
- +/-10% variable pitch slide control
- Solid aluminum platter with easy glide grooves
- Straight tone arm for superior tracking
- Tone arm height adjustment up to 6 mm with lock
- Fully adjustable counter weight & anti-skating controls
- LED illuminated soft touch start/stop & RPM buttons
- 33/45/78 RPM
- Push button quartz lock w/ LED
- Target light with RCAconnector
- Removable head shell
- Felt slip mat included
- Detachable RCA & ground cables
PRECAUTIONS:
1. Read all operating instructions before using this equipment.
2. The apparatus should not be exposed to dripping or splashing, and no objects filled with liquids such as vases should be
placed on the apparatus.
3. To reduce the risk of electrical shock, DO NOT OPEN THE
UNIT. Please contact the Gemini Service Department or your
authorized dealer to speak to a qualified service technician.
USA ~ IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT
IN THE
CALL
4. Tone Arm bearings are factory set and sealed. Any attempt at
adjustment will void the warranty.
5. Be sure that all AC power is OFF while making connections.
6. Cables should be low capacitance, shielded and of proper
length. Make sure that all plugs and jacks are tight and properly
connected.
7. Always, begin with the audio level faders/volume controls set
at minimum and the speaker volume control(s) set to OFF. Wait
8 to 10 seconds prior to turning up the speaker volume to prevent the transient "POP" that could result in speaker/crossover
damage.
8. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
9. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON
ANY CONTROLS OR SWITCHES.
CUSTOMER
GEMINI
ATTEMPT TO RETURN THIS EQUIPMENT TO YOUR DEALER
SERVICE AT: 1 (732) 738-9003. DO NOT
.
PARTS CHECKLIST:
Please make sure the following parts are included with your TT03:
Turntable unit..........................................................................1
Turntable platter......................................................................1
Slipmat....................................................................................1
Counterweight........................................................................ 1
Headshell with cartridge.........................................................1
RCA target light……………………………….............…………1
ASSEMBLY & SET-UP:
SEE FIG. 3 FOR PART NUMBERS AND LOCATIONS.
VOLTAGE SELECTION:
Rotate the PLATTER (2) until the VOLTAGE SELECTION
SWITCH (3) (located on the TURNTABLE BASE (1)) is visible
through one of the platter holes. Make sure that the VOLTAGE
SELECTOR SWITCH (3) is set to the correct voltage.
WARNING: IF YOU TRY TO OPERATE THE TURNTABLE WITH THE INCORRECT VOLTAGE SETTING, IT CAN DAMAGE YOUR TURNTABLE.
TURNTABLE INSTALLATION:
1. Put the SLIPMAT (4) on the PLATTER (2).
2. Set the TURNT ABLE BASE (1) on a flat, level surface free of
vibration. Use the turntable feet to stabilize the unit horizontally.
3. Try to place the unit as far away from the speakers as possible.
4. Keep the unit away from direct exposure to the sun, heat,
moisture or dirt.
5. Keep the unit well ventilated.
CARTRIDGE INSTALLA
Because all cartridges have their own designs, please refer to
your particular cartridge's instructions to insure proper installation. If you are using a pre-mounted or integrated cartridge, you
can jump ahead to HEADSHELL INSTALLATION.
1. Connect the lead wires to the cartridge terminals. For your
convenience, the terminals of most cartridges are color-coded.
Connect each lead wire to the terminal of the same color. In
case your cartridge is not marked the positive leads are the ones
on top negative below, left are left, and right is right.
White (L+)................................................Left Channel +
Blue (L-)...................................................Left Channel -
Red (R+)...............................................Right Channel +
Green (R-).............................................Right Channel -
2. Mount the cartridge in the HEADSHELL (5) and tighten it with
the screws included with the cartridge.
TION:
HEADSHELL INSTALLATION:
Insert the HEADSHELL (5) into the front of the tubular TONE
ARM (7). While holding the HEADSHELL (5) firmly in a horizon-
tal position, turn the LOCKING NUT (6) counter clockwise until
the HEADSHELL (5) is locked in place.
COUNTER
1. Slide the COUNTERWEIGHT (8) onto the rear of the TONE
ARM (7) with the numbered stylus gauge facing forward.
2. Twist the COUNTERWEIGHT (8) counter clockwise lightly, to
screw it onto the rear of the TONE ARM (7).
WEIGHT INSTALLATION:
ADJUSTING HORIZONT ALZERO (0)
BALANCE AND STYLUS PRESSURE:
1. Without touching the stylus tip, remove the stylus protector (if
your cartridge has a detachable one).
2. Release the ARM CLAMP (10) and lift the TONE ARM (7) off
the ARM REST (11).
3. Counter clockwise advancement of the COUNTERWEIGHT
(8) will cause the cartridge side of the TONE ARM (7) to be lowered; turning it clockwise will cause the opposite. Turn the
COUNTERWEIGHT (8) clockwise or counter clockwise as needed until the TONE ARM (7) is balanced horizontally. You can
(SEE FIG. 1)
(SEE FIG. 2)
(44)
easily tell this by watching for the point where the TONE ARM
(7) "floats" freely.
4. Place TONE ARM (7) on ARM REST (11) and lock it in place
with the ARM CLAMP (10).
5. With the TONE ARM (7) locked on the ARM REST (11), hold
the COUNTERWEIGHT (8) steady with one hand while rotating
the STYLUS PRESSURE RING (9) until the numeral "0" on the
ring aligns with the center line on the TONE ARM (7) rear shaft.
The HORIZONTAL ZERO (0) balance should be completed.
6. Re-float the TONE ARM (7) to ensure horizontal zero (0) balance. If zero balance has not been maintained, repeat counterweight steps 3 - 5.
7. After adjusting the HORIZONTAL ZERO (0) balance, turn the
balanced COUNTERWEIGHT (8) counter clockwise until the
cartridge manufacturer's recommend stylus pressure appears
on the STYLUS PRESSURE RING (9) where it meets the center line of the TONE ARM (7) rear shaft.
ADJUSTING THE ANTI-SKATING CONTROL:
Set the ANTI-SKATING CONTROL (12) to the same value as
the stylus pressure.
NOTE: IF YOUR TURNTABLE CAME WITH A CN-1000 CARTRIDGE, IT HAS A
RECOMMENDED TRACKING FORCE OF 3.0 GRAMS AND CAN HA VE RANGE
FROM 2.5-3.5 GRAMS.
ADJUSTING TONE ARM HEIGHT:
The TT-03 comes with an adjustable TONE ARM BASE (7).
This feature is generally used when a larger or smaller sized
headshell is used for record playing. You may adjust the height
of the TONE ARM (7) by unlocking the base with the use of the
LOCK SWITCH (20) located next to the ANTI SKATE CONTROL (12). Then adjust the TONE ARM ADJUSTMENT
LEVER (8), located below the counter weight, to adjust the
height of the TONE ARM (7) by 6 mm.
CONNECTIONS:
1. Plug the AC power plug into an appropriate outlet.
2. See T ABLE A for proper connection of the output RCA plugs
and ground connector. Make sure that all the plugs are firmly
plugged into the appropriate jacks (phono inputs).
NOTE: TO REDUCE HUM, MAKE SURE THE GROUND LUG IS FIRMLY CONNECTED TO THE GROUND SCREW.
TABLE A:
OUTPUT CONNECTORS MIXER OR RECIEVER
L (WHITE) PHONO L CHANNEL
R (RED) PHONO R CHANNEL
GND (SPADE LUG) GND SCREW
OPERATING INSTRUCTIONS:
BASIC OPERATION:
1. Turn the POWER (13) switch to the "ON" position, at which
point the TARGET LIGHT (14) will light up, TARGET LIGHTS
(14) are an optional accessory available at your local retailer.
2. Place a record on the SLIPMAT (4) which sits on the PLAT-
TER (2).
3. Select the desired speed by depressing the 33, 45 or 78 (33
& 45 simultaneously) SPEED SELECTOR (16) button.
TTTT-0033
TTTT-0033
4. Remove the stylus protector (if applicable to your cartridge).
5. Release the ARM CLAMP (10) found on the ARM REST (11).
6. Push the START/STOP (15) button. The turntable PLATTER
(2) will start to spin.
7. Carefully position the TONE ARM (7) over the desired position over the record. Lower the TONE ARM (7) slowly, while letting go of the TONE ARM (7) over the record where you want to
play.
8. When play is over, raise the TONE ARM (7), move it onto the
ARM REST (11), and secure it with the ARM CLAMP (10).
9. You now have the option of turning off the power by turning
the POWER (13) switch to the "OFF" position, or stopping the
PLATTER (2) by pushing the START/STOP (15) button.
INTERRUPTING PLAY:
1. Pushing the START/STOP (15) button will cause the record to
stop exactly when the START/STOP (15) button is pressed
while playing.
2. Press the START/STOP (15) button again to start playback
with a short delay effect.
ADJUSTING THE PITCH CONTROL:
1. The TT-03 is equipped with a PITCH SLIDE CONTROL (17).
When the PITCH SLIDE CONTROL (17) is in the center position, the speed will be 33, 45, or 78 depending on which SPEED
SELECTOR (16) button is pushed.
2. When the PITCH SLIDE CONTROL (17) is positioned off center, the pitch can vary ±10% depending on the position of the
PITCH SLIDE CONTROL (17).
3. To lock the PITCH SLIDE CONTROL (17) press the QUARTZ
LOCK BUTTON (18) located above the PITCH SLIDE CONTROL (17).
SPECIFICATIONS:
TURNTABLE SECTION:
Type.................................Direct Drive Manual Turntable
Drive Method..............High Torque (2.2 kg) Direct Drive
Motor.............................................................................DC Motor
Speed...............................................33 1/3, 45, 78 RPM
Wow and Flutter.....................Less than 0.15% WRMS*
*THIS RATING REFERS TO THE TURNTABLE ASSEMBLY AND PLATTER
ONLY AND EXCLUDES EFFECTS OF RECORDS, CARTRIDGES OR TONEARMS.
TONEARM SECTION:
Type......................Statically Balanced Straight Tonearm
Headshell Weight....................................................5.6 g
GENERAL:
Power Supply..............................AC 115 V~60 Hz/230 V~50 Hz
Power Consumption.............................................................30 W
Dimensions...................................................17.75" x 5.75" x 14"
....................................................................(450 x 136 x 352mm)
Weight.....................................................20.1 lbs. (9.1 kg)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. THE
WEIGHT AND DIMENSIONS SHOWN ARE APPROXIMATE.
(5)
Loading...