Gemini DJ AS-08TOGO, AS-10TOGO, AS-12TOGO, AS-15TOGO User manual

USER MANUAL

AS-08TOGO

AS-10TOGO

AS-12TOGO

AS-15TOGO

INTRODUCTION

Thank you for purchasing our AS-TOGO Series speaker.

We are condent that the Gemini family of products will
not only make your life easier using the latest techno­logical advancements in cross-platform connectivity and
sound reproduction, but will raise the bar for DJ and pro
audio products.
With the proper care & maintenance, your unit will likely
provide years of reliable, uninterrupted service. All Gemi­ni products are backed by a 1-year limited warranty*.

PREPARING FOR FIRST USE

Please ensure that you nd these accessories included

with your AS-TOGO speaker:

(1) Power Cord; (1) Operating Instructions;
(1) Warranty Card.

CAUTION

1. All operating instructions should be read before using

this equipment.

2. To reduce the risk of electrical shock, do not open the
unit. There are NO USER REPLACEABLE PARTS INSIDE.
Please refer servicing to a qualied Gemini service tech­nician. Do not attempt to return this equipment to your
dealer.

3. Do not expose this unit to direct sunlight or to a heat
source such as a radiator or stove.

4. This unit should be cleaned only with a damp cloth.
Avoid solvents or other cleaning detergents.

5. When moving this equipment, it should be placed in
its original carton and packaging. This will reduce the
risk of damage during transit.

6. DO NOT EXPOSE THIS UNIT TO WATER OR HEAT.

7. DO NOT USE CLEANING PRODUCTS OR LUBRI-

CANTS ON THE CONTROLS OR SWITCHES.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Always follow the basic precautions listed below to
avoid the possibility of serious injury or even death
from electrical shock, short-circuiting, damages, re,
or other hazards.

• READ INSTRUCTIONS:

All the safety and operating instructions should be read
before the product is operated.

• RETAIN INSTRUCTIONS:

The safety and operating instructions should be retained
for future reference. All the safety and operating instruc­tions should be read before the product is operated.

• HEED WARNINGS:

All warnings on the product and in the operating in­structions should be adhered to.

• FOLLOW INSTRUCTIONS:

All operating and use instructions should be followed.

• CLEANING:

The product should be cleaned only with a polishing
cloth or a soft dry cloth. Never clean with furniture wax,
benzene, insecticides or other volatile liquids since they
may corrode the cabinet.

• WATER AND MOISTURE:

Do not use this product near water, for example, near
a bathtub, wash bowl, kitchen sink, or Laundry tub; in a
wet basement; or near a swimming pool; and the like.

• DO NOT OPEN:

Do not open the device or attempt to disassemble the
internal parts or modify them in any way. The device
contains no user- serviceable parts. If it should appear
to be malfunctioning, discontinue use immediately and
have it inspected by qualied GEMINI service personnel.

• REPLACEMENT PARTS:

When replacement parts are required, be sure the ser­vice technician has used replacement parts specied by
the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in
re, electric shock, or other hazards.

• LOCATION:

If you use a stand, check the stand’s specications and
make sure that it is sturdy enough to support the weight
of the speaker. You may need to limit the number of
people around the placed stand, to avoid toppling the
device or causing damage to the internal components.
Also, be sure to keep the following cautions.

– Use the speaker stands with their legs fully opened.
– Mount only one speaker on each speaker stand.
– Tighten fastening screws securely.
– Remove the speakers from the stands before moving

the stands or adjusting their height.
– Add weight such as sand bags around the stand legs
to prevent them from falling over.

– Use the stand at a maximum height of 140cm (55”).
– If you use the socket of the GVX subwoofer to allow

mounting of a satellite speaker, use a pole 100cm max.
with an outer diameter of 35mm (1-3/8”).
– When transporting the device, always use two or more
people.

– Before moving the device, remove all connected cables.
– Do not use the speaker’s handles for suspended instal-

lation. Doing so can result in damage or injury.
– Do not expose the device to excessive dust or vibrations,
or extreme cold or heat (such as in direct sunlight, near
a heater) to prevent the possibility of panel disguration
or damage to the internal components.
– Do not place the device in an unstable position where
it may accidentally fall over.

• RIGGING SAFETY:

The GVX series Rigging System’s provisions for use re­quire that it be installed in accordance with the following
specications. Before you begin installation:
– Ensure that points where you have chosen to mount
(for example a chain hoist) on the stage roof or venues
ceiling comply with accident prevention and that the
safety standards authority has certied them for the
full load.
– Inspect all components to ensure they are in good
working order, taking care that all tracks, trusses and
connecting components (cables, ttings) are undamaged
– Use only the parts specied in this operating manual!
Be sure to protect cabinets against rain and moisture
when they are deployed outdoors
– If parts of the load-bearing equipment have been de­formed, it is up to the manufacturer to determine if they
are repairable.
The principle requirement for safe handling and trou­ble-free operation of this rigging system is a thorough
understanding of fundamental operating safety and
safety regulations. This operating manual contains the
most vital instructions concerning the safe operation of
the GVX enclosures.

• CONNECTIONS: Before connecting the device to other
devices, turn o the power for all devices. Before turning
the power on or o for all devices, set all volume levels
to minimum.
– Use only speaker cables for connecting speakers to the
speaker jacks. Use of other types of cables may result
in re.
– Be sure to observe the amplier’s rated load impedance,
particularly when connecting speakers in parallel.
Connecting an impedance load outside the amplier’s
rated range can damage the amplier.

FEATURES // English //

**AS-15TOGO Shown**

1. LCD: Displays the Media Panel modes for Bluetooth,
USB, SD and Aux.

2. USB Port: Connect your USB flash drive to play music.

3. SD Card Slot: Insert your SD card here.

4. Mode: Switches modes from Bluetooth, SD, USB, and

Aux.

5. Play/Pause: Play/Pause the USB, SD, or Bluetooth
source.

6. Repeat: Repeat the current playing USB or SD track
(ONE), repeat all the tracks
(ALL), or shuffle the track order (Pd0).

7. Back: Navigates through USB and SD tracks. Plays the
previous USB, SD, or Bluetooth track.

8. Forward: Plays the next USB, SD, or Bluetooth track.

9. Main Volume: Adjusts the loudness of the speaker.

10. Bass EQ: Increases or decreases the bass (low)

frequencies of the speaker at a range between -12dB to
+ 12dB.

11. Treble EQ: Increases or decreases the treble (high)
frequencies of the speaker at a range between

-12dB to + 12dB.

12. Echo: Increases the amount of echo eect.

13. Mic/Guitar Volume: Adjusts the volume for the mi-

crophones.

14. Guitar Input: Connect a guitar to this 1/4” input.

15. Mic Input: Connect a microphone to this 1/4” input.

16. AUX Input (TRS): Connect a digital media player, etc.

to this 1/8” stereo input.

17. AUX Out: Connect this RCA output to another active
(powered) speaker.

18. AUX Input (RCA): Connect a CD player, mixer, or
other media source to this line level RCA input.

19. Battery Status Indicator: Gives info on remaining
battery charge.

20. DC Power Input: Mains power supply (supplied with
speaker) plugs in here.

21. DC Battery Connection: Connect an external battery
or DC power source here.

22. Power ON/OFF Switch: Turns unit on or o.

13

4

5 6

9

10

11

18

17

16

19

2

7 8

12 13

15

21

14

22

20