Gemini PMX-500 User Manual

OPERATORS MANUAL

BEDIENUNGSHANDBUCH MANUAL DEL OPERADOR MANUEL D’INSTRUCTIONS

PMX-500

PROFESSIONAL STEREO PREAMP MIXER

PROFESSIONNELLER STEREO VORVERSTÄRKERMISCHPULT MEZCLADOR-PREAMPLIFICADOR ESTEREOFÓNICO PARA EL PROFESIONAL MÉLANGEUR-PRÉAMPLIFICATEUR STÉRÉOPHONIQUE POUR LE PROFESSIONNEL MISCELATORE-PREAMPLIFICATORE STEREOFONICO PER IL PROFESSIONALE

ULTI

ENGLISH................................................................................................................................PAGE 3

DEUTSCH..............................................................................................................................PAGE 4

ESPAÑOL...............................................................................................................................PAGE 5

FRANCAIS.............................................................................................................................PAGE 6

-L

ANGUAGE

(1)

NSTRUCTIONS

PMX-500 FEATURES:

10 11

3 4

5 6

3 4

12 13

(2)

INTRODUCTION:

Congratulations on purchasing the Gemini PMX-500 mixer. This state of the art mixer includes the latest features and is backed by a three year limited warranty, excluding crossfader and channel slides. Prior to use, we suggest that you carefully read all the instructions.

FEATURES:

• 2 Stereo channels

• 2 Phono/Line Convertible, 1 Phono, 1 Line and 1 Mic input

• 1/4" DJ Mic jack

• Bass, Mid, High and Gain controls on each channel

• Master output control

• Cue section

CAUTIONS:

1. All operating instructions should be read before using this equipment.

2. To reduce the risk of electrical shock, do not open the unit. There are

NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified service technician.

In the U.S.A., if you have any problems with this unit, call 1-732-738 9003 for customer service. Do not return equipment to your dealer.

3. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove.

4. This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents.

5. When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit.

6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY

CONTROLS OR SWITCHES.

CONNECTIONS:

1. Before plugging in the 15V AC Adapter into the POWER JACK (2) on rear panel, make sure that the POWER (1) switch is in the off position.

2. The PMX-500 is supplied with 2 sets of output jacks. The MASTER

OUTPUT (3) jacks are used to connect to your main amplifier. The REC OUTPUT (4) jacks can be used to connect the mixer to the record

input of your recorder enabling you to record your mix.

3. The DJ MIC (12) input (found on the front panel) accepts a 1/4" connector and accepts balanced and unbalanced microphones.

4. On the rear panel are 2 stereo PHONO/LINE (6, 10) inputs, 1 stereo

PHONO (11) input and 1 stereo LINE (5) input. The PHONO/LINE SWITCHES (7, 8) enable you to set the (6, 10) inputs to Phono or

Line. The Phono inputs will accept only turntables with a MAGNETIC CARTRIDGE. A GROUND SCREW (9) for you to ground your

turntables is located on the rear panel. The stereo line inputs will accept any line level input such as a CD player, a cassette player, etc.

5. Headphones plug into the front panel mounted HEADPHONE (13) jack.

OPERATION:

1. POWER ON: Once you have made all the equipment connections to your mixer, press the POWER (1) switch.

2. CHANNEL 1: The GAIN (14), HIGH (15), MID (16), and BASS (17) controls allow you to fully adjust the selected source. SWITCH # (18) allows you to select either the PHONO 1 (11) or the PHONO 2/LINE 1 (10) input. The CHANNEL SLIDE (19) controls the output level of this channel.

3. CHANNEL 2: The GAIN (20), HIGH (21), MID (22), and BASS (23) controls allow you to fully adjust the selected source. SWITCH #

(24) allow you to select either the PHONO 3/LINE 2 (6) or the LINE 3 (5) input. The CHANNEL SLIDE (25) controls the output level of this

channel.

NOTE: THERE IS BASS, MID AND HIGH EQUALIZATION FOR EACH CHANNEL

WITH AN EXTREMELY WIDE RANGE OF ADJUSTMENT GIVING YOU A SMOOTHER MIX.

4. CROSSFADER SECTION: The CROSSFADER (26) allows the mixing

of one source into another. The left side of the CROSSFADER (26) is CHANNEL 1 and the right side is CHANNEL 2. The CROSSFADER (26) in your unit is removable and if the need arises can be easily replaced. Your Gemini mixer comes with an RG-45 PRO (RAILGLIDE™) Dual- Rail Crossfader. RAIL GLIDE™ crossfaders have internal dual stainless steel rails that allow the slider to ride smoothly and accurately from end to end. Also available is our CF-45 PRO (PROGLIDE™) Dual- Rail Crossfader. This unique crossfader features, state of the art conductive plastic technology, for unlimited useage. Another crossfader we have available is the PSF-45 (PRO SCRATCH™) crossfader with a special curve designed for scratch mixing. Just purchase one from your Gemini dealer and follow the instructions:

1. Unscrew the outside FADER PLATE SCREWS (B). Do not touch the INSIDE SCREWS (C).

2. Carefully lift the fader and unplug the CABLE (D).

3. Plug the new fader into the cable and place it back in the mixer.

4. Screw the fader to the mixer.

5. The CROSSFADER REVERSE SWITCH (27) allows you to reverse the crossfader so that CHANNEL 2 is controlled by the left side of the crossfader and CHANNEL 1 is controlled by the right side of the crossfader.

NOTE: WHEN THE CROSSFADER REVERSE SWITCH (27) IS ACTIVATED

(MOVED TO THE RIGHT), ONLY THE CROSSFADER REVERSES. THE CHANNEL SLIDES, GAIN, AND TONAL CONTROLS DO NOT REVERSE.

6. PUNCH IN: The PUNCH IN BUTTONS (28) allow you to add a channel’s signal to the mix when the crossfader is set to the opposite channel.

7. OUTPUT CONTROL SECTION: The level of the MASTER OUTPUT (3) is controlled by the MASTER (29) control.

NOTE: THE RECORD OUT (4) HAS NO LEVEL CONTROL. THE LEVEL IS SET

BY THE CHANNEL SLIDES AND THE GAIN CONTROLS OF THE SELECTED CHANNEL. THE TONAL QUALITIES ARE SET BY THE BASS, MID AND HIGH CONTROLS OF THAT SAME CHANNEL.

8. TALKOVER SECTION: The purpose of the TALKOVER section is to allow the program playing to be muted so that the MIC can be heard above the music. The MIC/TALKOVER (30) switch has three settings. When the MIC/TALKOVER (30) switch is in the left position, the MIC and TALKOVER are both off. When the MIC/TALKOVER (30) switch is in the center position the MIC is on, the MIC INDICATOR (31) will glow, but talkover is off. When the MIC/TALKOVER (30) switch is in the right position, the MIC and TALKOVER will be on and the volume of all sources except the MIC input are lowered by 16 dB. MIC LEVEL (33) controls the level of the MIC. The MIC EQ (32) control allows you to fully adjust the tone of the MIC.

9. CUE SECTION: By connecting a set of headphones to the HEADPHONE

JACK (13), you can monitor either channel or both together. Move the CUE SWITCH (34) to the left to monitor CHANNEL 1. Move the CUE SWITCH (34) to the right to monitor CHANNEL 2. By rotating the CUE PGM PAN (35) control to the left you will be able to monitor the assigned

cue signal. Rotating to the right will monitor the PGM (program) output. Use the CUE LEVEL (36) control to adjust the headphone volume without affecting the overall mix.

10.DISPLAY: DISPLAY (37) indicates the MASTER OUTPUT (3) left and right levels, as controlled by the MASTER (29) level.

SPECIFICATIONS:

INPUTS:

DJ Mic........................................................................................1.5 mV 2 kOhm

Phono @1kHz...............................................................................2 mV 47 kOhm

Line.........................................................................................100 mV 10 kOhm

OUTPUTS:

Amp.........................................................................................0 dB 1V 400 Ohm

GENERAL:

BASS (Channels 1-2)......................................................................+ 12 dB/-32 dB

Mid (Channels 1-2).........................................................................+ 12 dB/-32 dB

High (Channels 1-2).......................................................................+ 12 dB/-32 dB

Gain (Channels 1-2)............................................................................0 to -20 dB

Frequency Response...........................................................20 Hz-20 kHz +/- 2 dB

Distortion....................................................................................less than 0.02%

S/N Ratio..................................................................................better than 80 dB

Talkover Attenuation..................................................................................-16 dB

Power Source...............................................................Adapter-115V/15V AC 0.5A

..........................................................................................or

Dimensions...............................................10” x 10.24” x 3.3” (254 x 260 x 84 mm)

Weight..........................................................................................6.25 lbs (3 kg)

Specifications and designs are subject to change without notice for the purpose of improvement.

(3)

Max-18V Peak to Peak

230V/15V AC 0.5A

+ 5 hidden pages