Gemini NCB-D200-IR, NCB-D200-TW User Manual

1
Users Manual ◀
2
3. Caution------------------------------------------------------------------------- 5
5. Box Contents------------------------------------------------------------------- 7
6. Components and Function---------------------------------------------------- 8
7. SD Card------------------------------------------------------------------------ 9
8. Installation---------------------------------------------------------------------- 10
9. Operation----------------------------------------------------------------------- 12
- Recording
- Dual Recording
- Continuous Recording
- Emergency Recording
- Volume Control of Voice Announcement
- Deleting Recording Files of SD Memory Card
- In Vehicle Recording Off
- AV Output (Install Mode)
- G-Shock Sensor Sensitivity Adjustment
10. LED Indication and Voice Announcement-------------------------------------- 14
11. Viewer Software Installation---------------------------------------------------- 15
12. Viewer Interface----------------------------------------------------------------- 16
13. Viewer Running----------------------------------------------------------------- 17
14. Firmware Upgrade-------------------------------------------------------------- 19
15. Specifications------------------------------------------------------------------- 19
16. Troubleshooting---------------------------------------------------------------- 20
Contents
3
사용 주의사
Following the safety rules prevent users from damages of property and injury of body caused by
misuse of the product. Please read the followings carefully.
*The contents of this manual are subject to change without notice for software upgrade or quality
improvement.
WARNING
This information is for preventing bodily harm or even death and user should follow this safety
rules.
CAUTION
This information is for preventing damage or reducing the life time of the products.
Notice
4
1. Do not install, disassemble or modify the product at your discretion. It might cause product
damage, electric shock or fire. When the device is out of order, please contact the local agency
for warranty service.
2. Do not operate the device while driving. It might be a cause of car accident. If the device
operation is required, stop the car at a safe parking lot and operate the device.
3. Do not use in trouble condition as like smoking, smell something burn. It may cause fire. Stop
to use and make inquiries to agency.
4. Do not clean the device with water. The device is not waterproof. It may cause malfunction,
electric shock or fire.
5. Unplug product when do not use the device for a long time. It may cause fire by short circuit
due to heating.
6. Do not place near of air bag effective range. It may cause malfunction of air bag or accident,
injury due to hitting the device by air bag.
7. Keep clean dust on power socket. It may cause electric shock and fire by bad connection.
8. Do not put a pin or needle on the hole or crack in the device body. In case those things are
inserted by mistake, stop operating. It may cause electric shock, fire and malfunction.
9. Attach the device on the windshield firmly. Clean the front windshield and attach the device
firmly. Otherwise the device may be detached due to temperature, humidity, dust or shock.
9. Use power cable supplied with the device when it is installed. If qualified cable is not used, it
might cause electric shock, fire and malfunction.
10. When the device is installed with continuous power cable, only a qualified engineer has to
install the device. If the device is not correctly connected, it causes damage to the vehicle and the
product.
11. Do not clean exterior with volatility or oily solvent. Neither keeps touching rubber and plastic
for long time. It may cause change of surface, fall of paint, malfunction and fire.
12. Do not pull cord with a jerk. Catch a plug and pull. Do not use damaged cord. It may cause
cord malfunction, electric shock and fire.
13. Before installation, the engine has to be turned off. It may cause an electric shock or defect.
The device has always to be installed at the place where the drivers view is not
interrupted.
Warning
5
1. Do not remove the SD memory card while power is on. It causes recording file missing and device
malfunction.
2. Do not touch or hold SD memory card with wet hand or oily hand. It may cause malfunction due to SD
memory card damage.
3. Do not put a foreign substance into the SD memory card slot of a device. It may cause malfunction or SD
memory card insert problem.
4. When power is supplied by the cigar lighter, watch the poor connection in a socket. Poor connection
causes data loss and SD memory card damage.
5. Do not clean the device with water, benzene or alcohol. Wipe the device with soft and dry cloth.
Otherwise, it may cause device damage.
6. Do not shock a device. The shock to the device might cause damage or malfunction of the device.
7. If the device is required to re-install, adjust the camera angle again. Play the recording file and re-adjust
the angle if the camera captures viewing angle wrongly.
8. When a car accident happens, turn the power off and wait until indication LED light is off. Then, remove
the SD memory card from the slot. As the recording file can be over written, in case the recording file is not
saved in an Event Folder, the SD memory card has to be removed from the device and kept separately.
9. Use a recommended authentic SD memory card. Not using authentic SD memory card might cause data
loss.
10. Do not remove the SD memory card or turn the power off while SD memory data is deleted or
formatted.
11. Play the recording file regularly to see the video is correctly recorded. And format SD memory card
regularly to avoid SD memory card error.
12. While continuous recording, with the battery protection function, the device may stop working earlier as
per battery status influenced by personally installed accessories. Battery protection function is built-in to
avoid battery discharge. But careful watch is essential with continuous recording as the battery can be
discharged fast as per seasonal condition and battery using period.
13. Detecting GPS signal may take time from few seconds to few minutes as per weather and geography
condition.
14. In a very dark condition and under no light, the recorded video quality would lower than daytime
recording.
15. Dark tinting film on windshield causes bad video recording quality.
16. Metallic tinting on windshield may cause radio block. It causes GPS signal receipt problem.
17. G-shock sensor for event recording is built-in. But if the shock is weak, event recording file may not be
created.
18. Power failure from the vehicle due to big accident or shock might cause data loss.
19. Light reflection by GPS screen and indoor lighting might cause after image at night recording.
Caution
6
Gemini is a recording device installed inside of the vehicle. The device simultaneously records the
tele view and wide view of the vehicle foreside or simultaneously does the vehicle inside and
outside. The device will record an accident on the road, the damage of the vehicle and so on.
Features
Simultaneous 2 channel recording (Tele/Wide or Outside/Inside)
Multi-joint structure for the easy adjustment of viewing angle
Multi-joint structure for the easy adjustment of viewing angle
A/V Output and Extra DC 12V Power Output
Battery discharge protection
Voice announcement system
Simultaneous Recording and Event Recording
Using safe and potable SD memory card
Detecting impact to a vehicle by G-Shock sensor
GPS built-in
Captured image printing available
7
Gift Box OP-CCR21 Bracket Users Manual
PC Viewer CD SD Memory Card Cigar Power Cable A/V OUT Cable
SD Card Reader and Accessory
Optional: DC FUZE POWER CABLE (for Constant Power)
DC/DC Power Cable
Before use the device, please check above contents. If there is something missing parts, please contact sales
agent. The box contents could be slightly different from the images as shown above and could be replaced
for quality improvement without prior notice.
Box Contents
Loading...
+ 14 hidden pages