GEMINI GX-1001, GX-1201, GX-1500, GX-801 User Manual

GX SERIES

Professional ABS Moulded Loudspeakers

Professionelle ABS Geformter Lautsprecher

Cajas Acústicas ABS Profesionales

Haut-Parleur Moulé Par ABS Professionnel

GX-800

GX-801 GX-1000 GX-1001 GX-1200 GX-1201 GX-1500 GX-1501

OPERATIONS MANUAL

BEDIENUNGSHANDBUCH

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

GX SERIES

MULTI LANGUAGE INSTRUCTIONS

ENGLISH.............................................................................PAGE 2

ESPAÑOL............................................................................PAGE 6

DEUTSCH.........................................................................PAGE 10

FRANÇAIS........................................................................PAGE 14

PLEASE READ BEFORE USING APPLIANCE

IMPORTANT WARNING AND SAFETY INSTRUCTIONS!

RISK OF ELECTRIC

CAUTION

CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances

such as radios and televisions, use shielded cables and connectors for connections. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the ap-

pliance. The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of

ufficient magnitude to constitute a risk of electric shock to persons.

EAD INSTRUCTIONS: All the safety and operating instructions should be read before the product is operated.

R RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for future reference. HEED WARNINGS: All warnings on the product and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS: All operating and use instructions should be followed. CLEANING: The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet. ATTACHMENTS: Do not use attachments not recommended by the product manufacturer as they may cause hazards. WATER AND MOISTURE: Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. ACCESSORIES: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only

with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product.Any mounting of theproduct shouldfollow themanufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

CART:A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to

overturn. See Figure A.

VENTILATION: Slots and openings in the cabinet are provided for ventilationand to ensure reliable operation of the product and to protect itfrom overheating, and these

openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

POWER SOURCES: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power sup-

ply to your home, consult your product dealer or local power company.

LOCATION: The appliance should be installed in a stable location. NON-USE PERIODS: The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. GROUNDING OR POLARIZATION:

• If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

• If this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.

POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at

plugs, convenience receptacles, and the point where they exit from the product.

OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against volt-

age surges and built-up static charges. Article 810 of the National Electrical Code,ANSI/NFPA70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure B.

LIGHTNING: For added protection for this product during a lightening storm, or when it is left unattended and unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightening and power-line surges.

POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. OBJECT AND LIQUID ENTRY: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that

could result in a fire or electric shock. Never spill liquid of any kind on the product.

SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing

to qualified service personnel.

DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

• When the power-supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the product.

• If the product has been exposed to rain or water.

• If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

• If the product has been dropped or damaged in any way.

• When the product exhibits a distinct change in performance, this indicates a need for service.

REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original

part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. WALL OR CEILING MOUNTING: The product should not be mounted to a wall or ceiling. HEAT: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

SHOCK DO NOT

OPEN!

Fig. A

Fig. B

GX SERIES

POWERED SPEAKERS

REAR PANELS

GX-801

9 8

GX-1001

GX-1201/1501

Unbalanced use of mono 1/4” jack plugs

Tip = Signal

Sleeve = Ground/Shield

Tip

Sleeve

Strain relief clamp

Connections

Balanced use with XLR connectors

Input

For unbalanced use, pin 1 and pin 3 have to be bridged

For connections of balanced and unbalanced plugs, ring and sleeve have to bridged at the stereo plug

PASSIVE SPEAKERS

SAME FOR ALL SIZES

1 = Ground/ Shield 2= Hot

3= Cold

Balanced use of stereo 1/4” jack plugs

Tip = Hot

Output

Ring = Cold

Sleeve = Ground/Shield

Tip

Ring

Sleeve

Strain relief clamp

GX SERIES

INTRODUCTION

Congratulations on your purchase of a Gemini GX Series loudspeaker. Your product is backed by a 1 year limited warranty. With proper care and maintenance your speaker will provide you with years of reliable service. Please register your product online at WWW.GEMNIDJ.COM or by using the included form at the end of this manual.

CAUTIONS:

1. All operating instructions should be read before using this equipment.

2. To reduce the risk of electrical shock , do not open the unit . there are NO USER OR SERVICABLE PARTS INSIDE please refer servicing to a qualified Gemini Sound Products service technician.

In the USA: If you experiance

problems with this unit, please call

1(732) 346 0061 for Gemni Customer

Service. Do not attempt to return this

equipment to your dealer

CONTROL ELEMENTS

((PPOOWWEERREEDD SSPPEEAAKKEERRSS))

FUSE HOLDER/VOLTAGE SELECTOR and MAIN POWER CONNECTOR. Please make sure that your local

voltage matches the voltage indicated on the unit, before you attempt to connect and operate your GX SERIES loudspeaker. Blown fuses may only be replaced by fuses of the same type and rating.

Use the POWER switch to put your GX SERIES loudspeaker into operation.

MAIN INPUT. These XLR connectors (GX-801 and 1001) and XLR, 1/4” and RCA connectors (GX-1201 and

1501) are the inputs for the signal source. The GX-801 allows you to choose what input type the XLR will be, simply by using Switch you can choose weather the XLR input is a LINE level input or a MICROPHONE input. The GX-1001 has separate XLR inputs for MIC and LINE and are adjustable individually. The GX-1201 and 1501 as well as having individual balanced XLR inputs for both MIC and LINE they also have UNBAL-

ANCED 1/4” input for MIC and UNBALANCED RCA inputs for LINE level input.

AUX INPUT The GX-801 has an UNBALANCED RCA AUX INPUT and the volume is controlled by the master

volume. The GX-1001/1201 and 1501) have both BALANCED (XLR) and UNBALANCED (RCA) and allow you to connect an auxiliary input source, if both MAIN INPUT and AUX INPUT are connected simultaneously both inputs will be heard.

LINE OUTPUT is directly connected to the input and or inputs of the GX SERIES loudspeaker and provides a

one-to-one copy of the input signal, for example, to loop the input through to the input of another device (e.g. a second GX SERIES loudspeaker).

POWER and CLIP LED The POWER LED will illuminate when the system is in operation. The CLIP LED will

illuminate when the system is overloading, running your GX SERIES loudspeaker at CLIP levels is not recommended and will cause the internal amplifier to fail and or the MAIN POWER FUSE to blow.

The VOLUME level governs the overall volume level of you GX SERIES loudspeaker.

The MIC GAIN/LEVEL rotary governs the GAIN (GX-801) and or LEVEL (GX-1001,1201 and 1501) of the

MICROPHONE INPUT.

The LINE LEVEL rotary adjust the volume of the INPUT and AUX INPUT Channels (GX-1001,1201 and 1501).

TONE/EQ (BASS and TREBLE) CONTROLS TONE (GX-801) will adjust the overall treble output of the

GX-801 by turning to the left you will hear less high end frequencies and by turning the rotary to the right you will hear more high end frequencies. EQ (BASS and TREBLE) (GX-1001,1201 and 1501) The (TREBLE) rotary will adjust the high end frequencies and the (BASS) rotary will adjust the low end frequencies of the overall output of the GX SERIES loudspeaker.

MIC/LINE SWITCH (GX-801 only) you can choose weather the XLR input of the GX-801 will be a LINE LEVEL

input or a MICROPHONE input. NOTE: USING THIS INPUT WITH A LINE LEVEL SOURCE WHILE

SWITCHED TO THE MIC POSITION MAY CAUSE THE SPEAKER TO OVERLOAD!.

((PPAASSSSIIVVEE SSPPEEAAKKEERRSS))

For the GX-800, 1000, 1200 and 1500 use a SPEAKON™ cable from your amplifiers speaker output to the

SPEAKON™ input jack.

GX SERIES

SPEAKER STANDS

MOUNTING

TOP VIEW UNDERSIDE

(GX-1200/1201/1500/1501)

STAND MOUNTING Insert a stand into the STAND MOUNTING SOCKET

LOCKING PIN You can lock the stand in its socket by inserting the LOCKING

PIN after you have mounted the stand securely

STACKING You can also stack the GX SERIES speakers by placing the

RUBBER FEET into the STACKING GROOVES.

SPEAKER RIGGING mounting hardware should be used to hang the speaker

where appropriate. Speaker stands and mounting hardware are available separately.

CHAIN LINK SETUP

MAIN SPEAKERS

DJ BOOTH

DANCEFLOOR

CHAIN LINKED SPEAKERS

All GX Speakers Have the Following: Steel / Aluminum-Cast Woofer, Stand Mounting Socket,Auxiliary Line Outputs,/Full Metal Grill, High Temp Voice Coil,Rigging Points, Rubber Feet, Stacking Grooves, Easy Carry Handles

Shipping Weight: GX-800/801 (27.5 lbs, 12.5 kgs / 31lbs 14.5 kgs)

GX-1000/1001 (35.2 lbs, 16 kgs / 43 lbs, 19.5 kgs) GX-1200/1201 (48.4 lbs, 22 kgs / 55 lbs, 25 kgs) GX-1500/1501 (57.2 lbs, 26 kgs / 64.9 lbs, 29.5 kgs)

SPECIFICATIONS

Woofer magnet wieght Woofer voice coil Woofer impedance Woofer RMS wattage Woofer peak wattage Compression driver magnet wieght Compression driver diaphram size Compression driver RMS wattage Compression driver peak wattage Crossover specification Nominal horn dispersion Sensitivity Frequency response Type of amplifier Total RMS wattage Total peak wattage Stand mount hole

GX-800/801

40oz 2” / 50.8mm 8/4 Ohms 70 Watts 150 Watts 13oz

1.35” / 35mm 30 Watts 100 Watts

3.5 Khz,12dB/Oct 30°x 60° 97 dB/1m/1w 70-20 Khz Mono-Power Amp 100 Watts 250 Watts 35mm

GX-1200/1201

65oz

2.5” / 65mm 8/4 Ohms 150 Watts 400 Watts 13oz

1.35” / 35mm 100 Watts 200 Watts

2.5 Khz,12dB/Oct 30°x 60° 97 dB/1m/1w 45-20 Khz Mono-Power Amp 250 Watts 600 Watts 35mm

GX-1000/1001

40oz 2” / 50.8mm 8/4 Ohms 120 Watts 250 Watts 13oz

1.35” / 35mm 60 Watts 150 Watts

2.8 Khz,12dB/Oct 30°x 60° 97 dB/1m/1w 60-20 Khz Mono-Power Amp 180 Watts 400 Watts 35mm

GX-1500/1501

65oz 3” / 72mm 8/4 Ohms 180 Watts 550 Watts 20oz

1.75”/44mm 120 Watts 250 Watts

2.2 Khz,12dB/Oct 30°x 60° 99 dB/1m/1w 45-20 Khz Mono-Power Amp 300 Watts 800 Watts 35mm

Specifications subject to change without notice for improvement

GX SERIES

MULTI LANGUAGE INSTRUCTIONS

ENGLISH.............................................................................PAGE 2

ESPAÑOL............................................................................PAGE 6

DEUTSCH.........................................................................PAGE 10

FRANÇAIS........................................................................PAGE 14

POR FAVOR LEA ANTES DE UTILIZAR, INSTRUCCIONES

IMPORTANTES DE SEGURIDAD

RIESGO DE SHOCK

CAUTION

ATENCIÓN: Este producto cumple con la normativa legal si se utilizan cables y conectores blindados para conectar la unidad a otro equipo. Para evitar interferencias electromagnéticas con otros aparatos

eléctricos, como radios y televisores, deben emplearse cables y conectores blindados.

Los signos de exclamación dentro de un triángulo que puedan aparecer en la documentación que acompaña a la unidad pretenden alertar al usuario de instrucciones de operación o mantenimiento im-

portantes.

El signo de un rayo dentro de un triángulo pretende alertar al usuario de la presencia de "voltaje peligroso" no aislado en el inte-rior de la unidad, que podría ser de suficiente intensidad como para con-

tituir riesgo de descarga eléctrica.

EA LAS INSTRUCCIONES: Deben leerse todas las indicaciones de uso y seguridad antes de usar este producto.

L CONSERVE LAS INSTRUCCIONES: Las instrucciones de uso y seguridad deben conservarse para referencias futuras.

ATIENDAA LAS ADVERTENCIAS: Deben seguirse todas las advertencias sobre este producto que figuran en el manual de instrucciones. SIGA LAS INSTRUCCIONES: Deben seguirse todas las instrucciones del manual. LIMPIEZA: Este producto debe limpiarse con una mopa suave o con un paño seco. Nunca utilice cera para muebles, gasolina, insecticidas u otros líquidos volátiles, ya que podrían corroer la carcasa. COMPLEMENTOS: No utilice accesorios que no estén recomendados por el fabricante, pues podrían dañar la unidad. AGUA Y HUMEDAD: No use este producto cerca de medios acuáticos, como una bañera, un cubo de agua, un fregadero o un lavadero; tampoco en un sótano húmedo, ni cerca de una piscina o simi-

lar.

ACCESORIOS: No coloque el producto sobre un carrito, soporte, trípode, brazo o mesa. Podría caer y causar graves daños a un niño o adulto, así como a la propia unidad. Úsese sólo con un carrito,

soporte, trípode, brazo o mesa recomendado por el fabricante. Al montar la unidad deben seguirse siempre las instrucciones y emplearse accesorios recomendados por el fabricante.

CARRITO: Si el producto va sobre un carrito, debe moverse el conjunto con cuidado. Detenciones bruscas, una fuerza excesiva o superficies inadecuadas pueden provocar la caída de todo el con-

junto. Véase Figura A.

VENTILACIÓN: Las aperturas y ranuras de la carcasa están diseñadas para la ventilación, aseguran un manejo fiable y lo protegen de cualquier sobrecalentamiento, por tanto, nunca deben cubrirse ni bloquearse. Estas aperturas no deben taparse colocando el producto sobre un sofá, una cama, una alfombra o superficies similares. Nunca debe colocarse en una estructura prefabricada, como una caja o un rack, a menos que tengan la ventilación adecuada o lo permitan las instrucciones del fabricante.

FUENTES DE ALIMENTACIÓN: Esta unidad debe utilizarse exclusivamente con el tipo de suministro eléctrico indicado en la etiqueta correspondiente. Consúltelo antes de enchufar el producto si no está seguro del tipo de suministro del lugar donde lo va a usar.

UBICACIÓN: Este aparato debe colocarse en una ubicación estable.

PERIODOS SIN USARLO: Si no se va a usar la unidad durante un tiempo prolongado, desenchúfelo de la corriente eléctrica.

TOMA DE TIERRAO POLARIZACIÓN:

- Si este producto lleva una clavija de corriente alterna polarizada (con un pivote más grueso que otro, tipo inglés), sólo entrará en una posición. Es una medida de

seguridad. Si no puede introducir la cla-vija en el enchufe, gírela. En ningún caso debe forzarse. Si sigue sin entrar, un electricista debería cambiar el enchufe.

- Si la unidad lleva una clavija con tres pivotes (el tercero corres-ponde a la toma de tierra), sólo entrará en un tipo de enchufe. Se trata de una medida de seguridad. Si el enchufe y la clavija no son

compatibles, un electricista deberá cambiar el enchufe. En ningún caso deberá forzarse.

PROTECCIÓN DEL CABLE DE CORRIENTE: Los cables de corriente deben protegerse para que nadie los pise ni corran el riesgo de pinzarse por elementos colocados encima o que los aprisionen. Debe prestarse especial atención al cable, al enchufe, a los extensores de cable y al punto por donde el cable sale de la unidad.

TIERRA DE LAANTENA EXTERIOR: Si el producto lleva conectada una antena exterior o sistema de cables, asegúrese de que cuenta con la toma de tierra correspondiente, a fin de proteger la unidad de variaciones de voltaje y cargas de electricidad estática. Existe documentación oficial acerca de la correcta utilización de la toma de tierra y de las medidas de seguridad pertinentes, conexión de los electrodos de descarga y sus requisitos. Véase Figura B.

RAYOS: Como protección adicional del producto durante una tormenta eléctrica, o durante periodos prolongados sin usarlo, desenchúfelo de la corriente y desconecte la antena o sistema de cables.

De este modo se protegerá el producto de los daños que pueda producir la caída de un rayo o las fluctuaciones de la red eléctrica.

LÍNEAS ELÉCTRICAS: Nunca debe situarse un sistema de antena cerca de líneas eléctricas u otros circuitos de corriente. Tampoco debe colocarse en lugares donde pueda caer sobre dichos circuitos

eléctricos. Al instalar un sistema de antenización exterior, debe tomarse la extrema precaución de no tocar dichas líneas eléctricas, pues el mas minimo contacto puede ser fatal.

SOBRECARGA: No sobrecargue los enchufes de la pared con ladrones o instalando enchufes múltiples, pues correría el riesgo de electrocución o incendio. ENTRADA DE OBJETOS O LÍQUIDOS: Nunca introduzca objetos de ningún tipo en el interior del producto, pues podrían tocar una parte eléctrica y cortocircuitar el aparato, lo que resultaría en un in-

cendio o descarga eléctrica. No verter nunca ningún líquido sobre el producto.

REPARACIÓN: No intente reparar el producto por cuenta propia, ya que abrir o retirar la carcasa le expondría a un voltaje peligroso u otros peligros. Diríjase siem-

pre a un centro de servicio técnico autorizado.

DAÑOS QUE REQUIEREN REPARACIÓN: Desenchufe el aparato de la corriente y diríjase a un servicio técnico autorizado si se da alguna de las siguientes situa-

ciones:

- El cable de alimentación o la clavija están dañados.

- Se ha vertido líquido o ha caído algún objeto sobre la unidad.

- El aparato se ha expuesto a la lluvia o a salpicaduras.

- La unidad se ha caído al suelo o dañado de algún modo.

- El aparato no funciona con normalidad, ni aun siguiendo las instrucciones. Ajuste sólo los mandos que se indican en las instrucciones, ja que la manipulación in-

adecuada de otros controles podría dañar la unidad y requeriría un mayor trabajo de un técnico para restablecer su funcionamiento normal.

- Si el producto muestra anomalías en su funcionamiento, necesita revisión por parte de un servicio técnico autorizado. RECAMBIOS: Cuando se necesite alguna pieza de recambio, asegúrese de que el servicio técnico utilice piezas originales autori-zadas o que tengan las mismas características que las originales. Los

reemplazos no autorizados pueden causar descargas eléctricas, incendios u otros daños.

COMPROBACIÓN DE SEGURIDAD: Tras la reparación, solicite al técnico que efectúe las comprobaciones de seguridad necesarias para determinar que el producto se encuentra en las condiciones

adecuadas para su funcionamiento.

MONTAJE EN UNA PARED O TECHO: Este producto nunca debe montarse en una pared o en el techo. CALOR: Este producto debe alejarse de fuentes de calor, como radiadores, estufas u otros aparatos que irradien calor, incluyendo amplificadores.

ELECTRICO - NO

ABRIR!

Fig. A

Fig. B

+ 13 hidden pages