Gemini 7057, 7056 User Manual

7057

7056

...................................

...........................................................

CERTIFICAT D' INSTALLATION

INSTALLATION CERTIFICATE

EINBAUBESCHEINIGUNG

Je soussigné,installateur,certifie d'avoir fait personnellement l'installation du dispositif d'alarme
du véhicule ci décrit,conforme aux instructions du constructeur.

The undersigned,qualified installer,attests to have personally fitted the here described Vehicle
Security system following the manufacturer instructions.

Der Installateur bestätigt mit seiner Unterschrift, daß die Alarmanlage in dem genannten Fahrzeug
nach Vorgaben Des Herstellers eingebaut wurde.

Signature,Firma,Assinatura,Unterschrift .................................................................

CERTIFICADO DE INSTALACION

El que suscribe, instalador, certifica el haber seguido personalmente la instalación del dispositivo
de alarma del vehículo descrito a continuación, de acuerdo con las instrucciones del fabricante.

CERTIFICATO DI INSTALLAZIONE.

Il sottoscritto,installatore,certifica di aver eseguito personalmente l'installazione del dispositivo
di allarme del veicolo descritto qui di seguito,conformemente alle istruzioni del fabbricante.

No forest has been destroyed to

produce this 100% recycled paper.

by GEMINI TRADING S.r.l. Via Luigi Galvani 12 21020 Bodio Lomnago (VA) Italia

Tel. [phone] - Fax [phone]

E-mail : [e-mail]

By :
Da :
Par :
Von :
Por :

Sold on :
Venduto il :
Vendu le :
Verkauft am :
Vendido el :

Type of product :
Tipo di prodotto :
Produktartikel :
Type de dispositif:
Dispositivo ciclo :

Auto
Car
Véhicule
Fahrzeug
Veículo

7208

0682

7057
7056

AC2506-REV.00/04/01

DESCRIPTION

Gemini 7057

Gemini 7057 is a compact, self-powered alarm with sensors and siren. Studied for vehicles
equipped with original transmitter and direction indicator lights flashing while opening and
closing the vehicles door.

Gemini 7056

As Gemini 7057 without self-power and engine immobilisation.

FUNCTIONS

- Control for alarm arming/disarming through the direction indicators lights and controls for the

vehicles lock actuators.

- Blinker and electronic siren.

- Perimetrical protection and volumetric protection only for Kit 7057US and Kit 7056US.

- Positive and negative control for vehicles equipped with “Pack-comfort” system.

- Engine immobilisation (only 7057).

- Negative control external additional siren.

- Automatic arming.

- Absorption sensor.

- LED’s memory.

The alarm system is supplied with two mechanical keys for the emergency release.

INSTALLATION INSTRUCTIONS (for the installer).

- It is necessary to memorise the arming/disarming sequence controls through the direction indicator

lights after the wiring connections.

- The alarm wiring harness must be positioned away from the vehicle high voltage wires in order to

avoid interference which could generate wrong working of the system.

- On vehicles with catalytic converter, the engine immobilisation must be carried out on the fuel

pump.

- For systems with volumetric sensors (art. 7057US e 7056US), the transducers must be installed at

the top of each windscreen pillar, far from the ventilation or the conditioning air outputs.

- Note: to obtain the correct working of the automatic arming and perimetrical protection functions,

connect the GREEN-BROWN wire to the boot/door switches.

DIP SWITCHES PROGRAMMING TABLE

1 ON Current absorption sensor ON
1 OFF Current absorption sensor OFF
2 ON Passive arming ON
2 OFF Passive arming OFF
3 ON Arming/disarming acoustic signalling OFF
3 OFF Arming/disarming acoustic signalling ON
4 ON Arming/disarming control through the direction indicator lights and the

vehicle lock actuators.

4 OFF Arming/disarming control through the direction indicator lights.

ATTENTION: SELECT THE DIP-SWITCHES BEFORE TURNING THE EMERGENCY KE Y TO ON.

ACCORDING TO THE RULES POSITION THE DIP-SWITCH N .1 TO OFF.

WIRING CONNECTIONS

(DISCONNECT THE NEGATIVE TERMINAL OF THE BATTERY AND ONLY RE-CONNECT AFTER THE

INSTALLATION IS COMPLETE )

FUNCTIONS WIRE COLOURS
Earth êê BLACK initialled M
Battery positive terminal êê BLACK initialled R
Engine immobilisation êê 2x GREY initialled H
Ignition live êê YELLOW
Door pin switch êê GREEN-BROWN
Boot/bonnet pin switch êê BLACK initialled V
Positive alarm armed êê PINK
Sensors inlet êê GREEN-BLACK
Negative comfort control additional siren êê YELLOW-BLACK
Positive Comfort control êê RED-BLACK
Negative Comfort control êê WHITE-BLACK
Arming/disarming control through the direction
indicator lights + Blinker.

êê 2 x ORANGE

Arming Synchronism control êê YELLOW-BLUE
Disarming Synchronism control êê GREEN-BLUE
NOTE: connect always the synchronism controls (YELLOW-BLUE and GREEN-BLUE wires) to

the two polarity reversal wires of the L.H.S. actuators lock.
The wiring harness is supplied with two connectors; connect the 4 pin connectors to the ultrasonic
module and the two pin connector to the LED.

SELF-LEARNING FUNCTION OF THE DIRECTION INDICATOR LIGHTS

FLASHING SEQUENCES.

IMPORTANT: BEFORE ACTIVATING THE SELF-LEARNING FUNCTION, IT IS NECESSARY TO SELECT

CORRECTLY THE DIP-SWITCHES AND TO CARRY OUT THE WIRING CONNECTIONS. DO NOT USE THE
TRANSMITTER BEFORE HAVING A CTIVATED THE SELF-LEARNING FUNCTION.

THIS FUNCTION ALLOWS MEMORISING THE SEQUENCE OF THE DIRECTION INDICATOR LIGHTS

FLAHING WHILE OPENING OR CLOSING THE DOOR.

To activate the self-learning function proceed as follows:

- Position the alarm key to OFF.

- Turn the ignition key to ON.

- Position the alarm key to ON.

- The LED of the alarm lights.

- Turn the ignition key to OFF.

- Close the vehicle door with the original transmitter. The LED stops lightning at the first

direction indicator lights flashing. One audible tone signals the door closure.

Note: wait always till the audible tone before learning the door opening.

- Open the vehicle door with the original transmitter. The LED stops lightning at the first

direction indicator lights flashing. Two audible tones signal the end of the self-learning
operation of the 7057 or 7056 system.

THE ACOUSTIC SIGNALLING CAN BE OBTAINED ALSO WITH THE DIP-SWITCH
N. 3 TO ON.