
USER MANUAL
HANDBUCH
HANDLEIDING
MANUEL DESCRIPTIF
РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
КЕРІВНИЦТВО КОРИСТУВАЧА
HIGH POWER USB WIFI ADAPTER, 300 MBPS
HIGHPOWER USB WIFI-ADAPTER, 300 MBPS
KRACHTIGE USB WIFI ONTVANGER, 300MBPS
HIGH POWER USB WIFI ADAPTER, 300 MBPS
МОЩНЫЙ USB WIFI АДАПТЕР
ПОТУЖНИЙ USB WIFI АДАПТЕР

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Features
High power USB WiFi adapter, 802.11b+g+n
Speeds up to 300 Mbps: watch online movies and stream music with
ease
The high power receiver allows you to connect to networks that are
normally out of range
Keep your network safe with the WPA and WPA2 encryption
Works with all laptops and PC’s
Specifications
Chipset: RTL8192EU
Interface: USB 2.0
Frequency: 2.4 - 2.4835 GHz
Supports IEEE 802.11b (up to 11 Mbps), 802.11g (up to 54 Mbps) and
802.11n (up to 300 Mbps) standards dinamically
RF power: up to 18 dBm
Supports secutiry: WPS, 64/128 bit WEP, WPA/WPA2, PA-
PSK/WPA2-PSK (TKIP/AES)

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Receiver sensitivity: 11M: -85dBm@8% PER; 54M: -68dBm@10%
PER; 270M: -68dBm@10% PER
Antenna t:ype: one detachable SMA antenna and one internal PIFA
antenna
Operating temperature: 0°C - 40°C
Power consumption: 5V DC, up to 0.5 A
Net weight: 34 g
Dimensions: 45 x 18 x 10 mm

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
1. INTRODUCTION
Thank you for purchasing WNP-UA300P-01 High power USB WiFi
adapter!
There is a LED indicator blinking when data communication is active.
2. QUICK INSTALLATION GUIDE
This chapter is to assist you how to use the included CD-ROM which
comprises the Driver and the Client Utility Interface.
2.1 Driver Installation
Please follow the following instructions to install your new wireless
USB Adapter
2.1.1 Insert the USB wireless network card into an empty USB 2.0 port of
your computer when computer is switched on. Never use force to insert the
card, if you feel it’s stuck, flip the card over and try again.
2.1.2 The following message will appear on your computer, click ‘Cancel
/ Close’.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Under Windows Vista and Windows 7
2.1.3 Insert the driver CD into your CD-ROM. You can see autorun
screen below. if not, you can double click ‘autorun.exe’ on CD.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Click ‘Install Driver’ to start the installation procedure
2.1.4 Installation descriptions shown. Click ‘Next’ to continue

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
2.1.5 Once the installation is finished the computer will be asked to
reboot. you can click ‘Finish’ and reboot the computer to finish the
installation of driver files.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
2.1.6 A new icon will appear near the clock of system tray:

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Left-click the icon will launch wireless network configuration utility,
and you can right-click the icon to show the quick menu of configuration
utility. This icon also uses different color to show the status of wireless
connection:
Wireless connection is established, good signal reception.
Wireless connection is established, weak signal reception.
Connection is not established yet.
Wireless network card is not detected.
For detailed instructions of wireless network configuration utility,
please see next chapter.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
2.2 Connect to Wireless Access Point
To use wireless network, you have to connect to a wireless access
point first. You can either use Client utility (comes with network card
driver), or Windows Zero Config utility (comes with Windows operating
system).
2.2.1 Using Client Utility
Please follow the following instructions to use Client configuration
utility to connect to wireless access point.
1. Left-click the Client configuration utility icon located at lower-right
corner of computer desktop, and configuration menu will appear:
HERE!
2. Wireless utility will appear. Click ‘Available Network’ menu to
search for wireless access points nearby.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
3. Please wait for a while, and all wireless access points which can be
reached by this wireless network card will be displayed here.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
If the wireless access point you wish to connect does not appear here,
you can click ‘Refresh’ button to scan for wireless access points again;

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
if the wireless access point you’re looking for still not appear, try to
move the computer closer.
When the access point you’re looking for is on the list, left-click it and
then double click it or click ‘Add to Profile’.
4. If a password (a.k.a. ‘Network Key’) is required to access the
wireless access point, please input it in ‘Network key’ (and input it again in
‘Confirm network key’ for confirmation). Click ‘OK’ when password is
properly inputted.
NOTE: Network security type (‘Network Authentication’ and ‘Data
encryption’) will be selected automatically based on wireless access point’s
security setting. It’s not required to change these settings by yourself.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
All options in this page will be filled automatically according to the
access point you wish to add to profile. However, you can still modify
any of them to meet your requirement.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
You can give a name to this profile, so you can remember
its purpose easily. It can be any phrase to help you remember.
The SSID (Service Set IDentifier, i.e. access point’s
name). This field will be filled as the access point you selected
when SSID is not hidden and grayed out. If SSID is hidden,
you have to input correct SSID you yourself.
This is a
computer-to-computer
(ad hoc) network
Check this box if you wish to connect to another computer
/ network device by ad hoc method. When not accessing to
wireless access point, you have to check this box.
Select wireless channel for ad hoc connection. This option
only appears when you’re using ad hoc connection.
Select the network authentication type from drop-down
menu. This setting must be identical with the setting of
wireless access point you with to connect.
Select the data encryption type from drop-down menu.
This setting must be identical with the setting of wireless
access point you with to connect.
When the encryption type is ‘WEP’, it’s required to input a
set of ‘passphrase’ to connect to wireless access point. Check
‘ASCII’ or ‘PASSPHRASE’ depends on the security setting of
access point, and input it in the box; if you select
‘PASSPHRASE’ you also need to select the length of the key.
The passphrase must be identical with the setting of
wireless access point you with to connect.
Select WEP key index. For most of access points you can
select ‘1’, but please refer to the setting of the access point.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Network key /
Confirm network key
When the encryption type is ‘WPA’ or ‘WPA2-PSK’, it’s
required to input a set of ‘passphrase’ to connect to wireless
access point. Please input the same passphrase in two boxes
for confirmation.
EAP TYPE /
Tunnel / Provision
Mode
When authentication type is any of 802.1X, you have to
select EAP type, tunnel, and provision mode from dropdown
menu. This setting must be identical with your 802.1x
authentication server.
Username /
Identity / Domain /
Password
Please input 802.1x related authentication information
here.
If certification is required to authenticate with 802.1x
authentication server, please select a local certificate from
dropdown list.
Check this box and PAC (Privilege Access Certificate) will
be automatically selected.
Please click ‘OK’ when ready.
5. Network card will attempt to connect to access point now, this may
require few seconds to minutes, please be patient. When the ‘Status’
become ‘Associated’ , your computer is connected to access point you
selected. Click ‘Close’ to close configuration menu.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
NOTE: If you connected to an access point but the connection has been dropped
soon, please check security settings and re-check password spelling.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
2.2.2 Using Windows Zero Configuration
Windows XP and Vista has a built-in wireless network configuration
utility, called as ‘Windows Zero Configuration’ (WZC). You can also
use WZC to configure your wireless network parameter:
1. Right-click Client configuration utility icon, and click ‘Open Config
Utility’.
2. Check ‘Windows Zero Config’ box.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
3. A message indicating that you’ve been switched to Windows Zero.
NOTE: To return to use Client utility, uncheck ‘Windows Zero Config’ box.
4. Click ‘Start’ button (should be located at the bottom-left corner of
windows desktop), click ‘Control Panel’, then click ‘Network and Internet
Connections’ in Control Panel.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
5. Double click ‘Network Connections’.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
6. Right-click ‘Wireless Network Connection’ (it may have a number
as suffix if you have more than one wireless network card, please make sure
you right-click the Wireless LAN 802.11n USB Network Adapter), then select
‘View Available Wireless Networks’.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
7. All wireless access points in proximity will be displayed here. If the
access point you want to use is not displayed here, please try to move your
computer closer to the access point, or you can click ‘Refresh network list’ to
rescan access points. Click the access point you want to use if it’s shown,
then click ‘Connect’.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
8. If the access point is protected by encryption, you have to input its
security key or passphrase here. It must match the encryption setting on the
access point. If the access point you selected does not use encryption, you’ll
not be prompted for security key or passphrase.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
9. If you can see ‘Connected’ message, the connection between your
computer and wireless access point is successfully established.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
3. CLIENT UTILITY
3.1 Connection Profile Management
If you need to connect to different wireless access points at different
time, like of access point of your home, office, cybercafe, or public
wireless service, you can store the connection parameters (encryption,
passphrase, security etc, etc.) as a profile for every access point, so you
don’t have to input these parameters every time when you want to
connect to a specific wireless access point.
To manage profiles, right-click the Client configuration utility icon
located at lower-right corner of computer desktop, then click ‘Open
Config Utility’.
Click the ‘Profile’ menu.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
3.1.1 Add a new profile
By this function you can setup the connection parameters for a
specific wireless access point in advance, without contacting it first.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
If you want to create a new profile, click ‘Profile’ menu, then click
‘Add’ button.
You’ll be prompted to input connection parameters for the wireless
access point you wish to connect:

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
You can give a name to this profile, so you can remember its purpose
easily. It can be any phrase to help you remember.
The SSID (Service Set IDentifier, i.e. access point’s name). This must be
identical with the SSID of the access point you wish to connect.
This is a
computer-tocomputer
Check this box if you wish to connect to another computer / network device
by ad hoc method. When not accessing to wireless access point, you have
to check this box.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Select wireless channel for ad hoc connection. This option only appears
when you’re using ad hoc connection.
Select the network authentication type from drop-down menu. This setting
must be identical with the setting of wireless access point you with to
connect.
Select the data encryption type from drop-down menu. This setting must be
identical with the setting of wireless access point you with to connect.
When the encryption type is ‘WEP’, it’s required to input a set of
‘passphrase’ to connect to wireless access point. Check ‘ASCII’ or
‘PASSPHRASE’ depends on the security setting of access point, and input it
in the box; if you select ‘PASSPHRASE’ you also need to select the length
of the key.
The passphrase must be identical with the setting of wireless access point
you with to connect.
Select WEP key index. For most of access points you can select ‘1’, but
please refer to the setting of the access point.
Network key /
Confirm
network key
When the encryption type is ‘WPA’ or ‘WPA2-PSK’, it’s required to input a
set of ‘passphrase’ to connect to wireless access point. Please input the
same passphrase in two boxes for confirmation.
EAP TYPE /
Tunnel /
Provision
Mode
When authentication type is any of 802.1X, you have to select EAP type,
tunnel, and provision mode from dropdown menu. This setting must be
identical with your 802.1x authentication server.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Username /
Identity /
Domain /
Password
Please input 802.1x related authentication information here.
If certification is required to authenticate with 802.1x authentication server,
please select a local certificate from dropdown list.
Check this box and PAC (Privilege Access Certificate) will be automatically
selected.
When all required parameters are set, click ‘OK’ to create and save a
new profile.
3.1.2 Remove an existing profile
When you no longer need an existing profile, you can remove it.
If you want to remove a profile, click ‘Profile’ menu, then select an
existing profile which you wish to remove, and then click ‘Remove’
button.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
3.1.3 Edit an existing profile
If you have added a profile before, and you wish to change the
content of the profile, you can use this function. Please select a profile
from the list first, then click ‘Edit’ button. You’ll be provided with the

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
contents of selected profile, and you can edit them. Click ‘OK’ to save
changes, or click ‘Cancel’ to discard changes.
3.1.4 Make a copy of existing profile
If you need to make a copy of a specific profile, you can use this
function. This function is very convenient when you need to build a new
profile which parameters are similar to any existing profile.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
To do this, select an existing profile, then click ‘Duplicate’ button.
You’ll be prompted to input a profile name, please use an identical
name that does not exist in profile list.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
3.1.5 Set as default profile
If you wish to use a specific profile as default connection, you can
select a profile in the list, and click ‘Set Default’. Selected profile will
become default selection and Client configuration utility will attempt to
connect to selected access point.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
3.2 View Network Statistics, General Information, and Status
The configuration utility provides information about network statistics and
link status. If you want to know how your wireless network card works, you
can use these functions to get detailed information about the wireless
connection you’re using.
3.2.1 General Information
If you want to know the general information of the access point you’re
connecting to, click ‘General’ menu:

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
All general information like signal strength and link quality will be
displayed here. These information are very useful when you encounter
some problem on connecting to access point.
If you wish to get a new IP address from DHCP server, you can click
‘ReNew IP’ button.
3.2.2 Status
If you want to know the status of your wireless network card, click
‘Status’ menu:

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
3.2.3 View Network Statistics
To view the statistical data of wireless network card, click ‘Statistics’
menu, and the statistics of wireless connection will be displayed:

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
All connection-related statistics is displayed here. You can click
‘Reset’ button, to reset the statistics of all items back to 0.
3.3 Miscellaneous Settings
There are few functions provided by Client configuration utility, you
can access these functions from the bottom of configuration menu:

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
The descriptions of these function are listed as follow:
Check this box to show an icon on system tray.
Uncheck this box to hide it.
Switch wireless radio off. Wireless network functionalities are
disabled.
Disable wireless network adapter. All functionalities of
configration menu will disappear. To resume, unckeck ‘Disable
Adapter’.
Use Windows Zero Configuration to manage wireless
connections. See section 2.2.2.
3.4 Establish secure connection with AP by WPS
Wi-Fi Protected Setup (WPS) is the latest wireless network
technology which makes wireless network setup become very simple. If
you have WPS-enabled wireless access point, and you want to
establish a secure connection to it, you don’t have to configure the
wireless access point and setup data encryption by yourself. All you
have to do is to go to the WPS setup page of this wireless card, click a
button, and then press a specific button or enter a set of 8-digit code on

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
the wireless access point you wish to establish a secure connection just three simple steps!
For older wireless access points, it’s possible to perform a firmware
upgrade to become a WPS-enabled access point. Since they may not
have a hardware button to press for WPS setup, you can use an
alternative WPS setup method - input the pin code. Every WPScompatible wireless network card support pin code configuration
method; you can just input the code to wireless access point, and the
wireless access point and wireless network card will do the rest for you.
This wireless network card is compatible with WPS. To use this
function, the wireless access point you wish to connect to must support
WPS function too. Now, please follow the following instructions to
establish secure connection between WPS-enabled wireless access
point and your wireless network card.
This wireless network card supports 2 kinds of WPS: PIN code and
Push-Button.
Please follow the following instructions to setup WPS:
1. Right-click Client configuration utility icon, and click ‘Open Config
Utility’.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
2. Click ‘Wi-Fi Protect Setup’ menu.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
3. You can use PIN code or Push-Button configuration, and WPS-
compatible wireless access point must use the same type of WPS. For
instructions on setup each type of WPS, see next 2 chapters for detailed
instructions.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
3.4.1 PIN Code
To use PIN Code, please click ‘Pin Input Config (PIN)’ button:

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
You’ll be prompted to select an access point you wish to connect. If
you know its SSID, click ‘Yes’, otherwise click ‘No’.
If you select ‘Yes’, a list of all WPS-compatible AP nearby will be
displayed; you can click ‘Refresh’ to rescan, then select an AP and click
‘Select’ button.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
If you select ‘No’, wireless network card will prompt you to enter 8-
digit PIN code into your AP, without selecting an AP in advance.
After you select ‘Yes’ or ‘No’ in previous step, network card will
attempt to connect to WPS-compatible AP, and an 8-digit number will
appear. Please input this number to AP’s configuration menu within 2
minutes, and network card will establish secure connection with AP
automatically.
To stop this procedure before connection is established, click ‘Cancel’.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
3.4.2 Push Button
To use Push-Button WPS configuration, please click ‘Push Button
Config (PBC)’ button. This is the easiest way to establish secure
connection by WPS, but if there’re more than one WPS-compatible AP
using Push-Button config, please use PIN Code instead.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
After you click “Push Button Config(PBC)”, a message box will
appear:
Please activate Push-Button function on wireless access point now,
and wireless network card will establish secure connection with access
point within one minute.
4. SOFT-AP FUNCTION
Excepting become a wireless client of other wireless access points,
this wireless adapter can act as a wireless service provider also! You
can switch this wireless adapter’s operating mode to ‘AP’ mode to
simulate the function of a real wireless access point by software, and all

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
other computers and wireless devices can connect to your computer
wirelessly, even share the internet connection you have!
Please follow the instructions in following chapters to use the AP
function of your wireless card.
4.1 Switch to AP Mode and Station Mode
The operating mode of the wireless card is ‘Station Mode’ (becoming
a client of other wireless access points) by default.
Please follow the following instructions to switch to AP mode:
1. Right-click Client configuration utility icon, and click ‘Open Config
Utility’.
2. Select ‘Mode’, and then select ‘Access Point’.
3.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
It requires few seconds to switch to AP mode, please be patient.
After mode switch is complete, you’ll see general information of
software AP, which shows AP’s SSID and connected wireless clients.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Client mode icon :
Software AP icon:

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
4.1.1 Configure SSID and Channel
To configure software AP, click ‘Config’ button:

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
The ‘Wireless Network Properties’ is displayed.
Please note that Ad-Hoc mode is not available when network card is

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
in AP mode. The description of major setup items are listed below:
Please input the SSID (the name used to identify
this wireless access point) here. Up to 32
numerical characters can be accepted here,
excepting space.
Please select the wireless channel you wish to
use, from 1 to 13.
To save changes, click ‘OK’; otherwise click ‘Cancel’ to leave this
menu and keep settings untouched.
4.1.2 Setup Soft AP Security
To setup security options for Soft-AP, configure ‘Wireless Network
Security’ section as follow:

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
The description of setup items about wireless security are listed below:
Select network authentication mode from
dropdown menu.
Select data encryption method from dropdown
menu.
If the encryption method is WEP, check either
‘ASCII’ or ‘PASSPHRASE’ box and input it in the box
as WEP passphrase.
Select WEP key index (1-4). If you don’t know
which one you should use, select 1.
Network key
/ Confirm
network key
IF network authentication mode is WPA, please
input WPA passphrase in both box.
To save changes, click ‘OK’; otherwise click ‘Cancel’ to leave this
menu and keep settings untouched.
4.2 Advanced Settings
If you want to setup advanced settings of software access point, select
‘Advanced’ menu. If you don’t know the meaning and affects of these
settings, keep them untouched.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
The description of all setup items are listed below:

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Please input wireless beacon time interval here.
Please input DTIM (Delivery Traffic Indication
Message) here.
Select wireless frame preamble mode (long or
short) from dropdown menu.
Reset all settings back to factory default value.
If you changed any setting here and cause problem on
communicating with wireless clients, click ‘Set Defaults’ to reset all
settings back to default setting.
4.3 Wireless Statistics
Select ‘Statistics’ menu and the data statistics about software access
point will be displayed.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Click ‘Reset’ to reset the value of every item back to ‘0’.
4.4 Internet Connection Sharing (ICS)
In this page, you can assign a network card on your computer as the

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
path for all wireless clients to get connected to Internet.
If you have only one network card (except this software access point),
you don’t have to select network card here; if you have more than one
network card, select the one you wish to be used as Internet gateway.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Click ‘Apply’ to save changes (‘Apply’ is grayed out when no
changes are made in this page).
5. TROUBLESHOOTING
If you encounter any problem when you’re using this wireless network card,
don’t panic! Before you call your dealer of purchase for help, please check
this troubleshooting table, the solution of your problem could be very simple,
and you can solve the problem by yourself !
I can’t find any
wireless access point /
wireless device in
‘Site Survey’ function.
1. Click ‘Rescan’ for few more times and see if you can find
any wireless access point or wireless device.
2. Please move closer to any known wireless access point.
3. Ad hoc’ function must be enabled for the wireless device
you wish to establish a direct wireless link.
4. Please adjust the position of network card (you may have
to move your computer if you’re using a notebook computer) and
click ‘Rescan’ button for few more times. If you can find the wireless
access point or wireless device you want to connect by doing this, try
to move closer to the place where the wireless access point or
wireless device is located.
Nothing happens
when I click ‘Open
Config Utility’
1. Please make sure the wireless network card is inserted
into your computer’s USB port.
2. Reboot the computer and try again.
3. Remove the card and insert it into another USB port.
4. Remove the driver and re-install.
5. Contact the dealer of purchase for help.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
I can not establish
connection with a
certain wireless
access point
1. Click ‘Add to Profile’ for few more times.
2. If the SSID of access point you wish to connect is hidden
(nothing displayed in ‘SSID’ field in ‘Site Survey’ function), you have
to input correct SSID of the access point you wish to connect. Please
contact the owner of access point to ask for correct SSID.
3. You have to input correct passphrase / security key to
connect an access point with encryption. Please contact the owner
of access point to ask for correct passphrase / security key.
4. The access point you wish to connect only allows network
cards with specific MAC address to establish connection. Please go
to ‘Status’ menu and write the value of ‘MAC Address’ down, then
present this value to the owner of access point so he / she can add
the MAC address of your network card to his / her access point’s list.
The network is
slow / having problem
when transferring
large files
1. Move closer to the place where access point is located.
2. There could be too much people using the same radio
channel. Ask the owner of the access point to change the channel
number.
Please try one or more solutions listed above.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
This product is tested and complies with the essential requirements of the
laws of member states concerning R&TTE(1999/5/EC). The CE declaration can be
found under www.gembird.eu
Dieses Produkt wurde getestet und stimmt mit den grundlegenden
Anforderungen der Richtlinie R&TTE(1999/5/EC) überein. Die Konformitätserklärung
kann auf unserer Webseite www.gembird.de heruntergeladen werden

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Waste disposal:
Do not deposit this equipment with the
household waste. Improper disposal can harm
both the environment and human health. For
Information about waste collection facilities for
used electrical and electronic devices, please
contact your city council or an authorized
company for the disposal of electrical and
electronic equipment.
Entsorgungshinweise:
Werfen Sie dieses Gerät nicht in den
Hausmüll. Unsachgemäße Entsorgung kann
sowohl der Umwelt als auch der menschlichen
Gesundheit schaden. Informationen zu
Sammelstellen für Altgeräte erhalten Sie bei
Ihrer Stadtverwaltung oder einer autorisierten
Stelle für die Entsorgung von Elektro-und
Elektronikgeräten.
Richtlijnen m.b.t. afvalverwerking
Batterijen en accu’s dienen als kleinchemisch afval afgeleverd te worden bij
toegewezen afvalverzamelpunten (zie
www.afvalgids.nl). U dient ervoor te zorgen
dat de batterijen/accu’s leeg zijn en dus geen
stroom meer kunnen leveren. Let op, de
batterijen/accu’s dienen onbeschadigd
ingeleverd te worden.
Gooi dit product niet weg in uw vuilnisbak. Dit
kan zowel het milieu als de menselijke
gezondheid schade toebrengen. Informatie
over het inleveren van dit product kunt u
inwinnen bij uw gemeentelijke vuilnisdienst of
andere geautoriseerde instelling in uw buurt.
Traitement des déchets:
Ne jetez pas cet appareil dans les déchets
domestiques. Un traitement inapproprié peut
être dommageable à l'environnement et à la
santé humain.
Vous trouvez des informations sur les centres
de rassemblement des appareils vieux chez
l'administration municipale ou
chez un centre autorisé pour le traitement des
appareils électriques ou électroniques.

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
The receipt must clearly list the date of
purchase and the part number, in addition it
should be printed. Keep the receipt for the
entire warranty period since it is required for
all warranty claims. During the warranty period
the defective items will be credited, repaired
or replaced at the manufacturer's expense.
Work carried out under the warranty neither
extends the warranty period nor starts a new
warranty period. The manufacturer reserves
the right to void any warranty claim for
damages or defects due to misuse, abuse or
external impact (falling down, impact, ingress
of water, dust, contamination or break).
Wearing parts (e.g. rechargeable batteries)
are excluded from the warranty. Upon receipt
of the RMA goods, Gembird Europe B.V.
reserves the right to choose between
replacement of defective goods or issuing a
credit note. The credit note amount will always
be calculated on the basis of the current
market value of the defective products
Die Garantie beträgt 24 Monate ab
Verkaufsdatum an den Endverbraucher. Das
Kaufdatum und der Gerätetyp sind durch eine
maschinell erstellte Kaufquittung zu belegen.
Bitte bewahren Sie Ihren Kaufbeleg daher für
die Dauer der Garantie auf, da er
Voraussetzung für eine eventuelle
Reklamation ist. Innerhalb der Garantiezeit
werden alle Mängel, wahlweise durch den
Hersteller entweder durch Instandsetzung,
Austausch mangelhafter Teile oder im
Austausch, behoben. Die Ausführung der
Garantieleistung bewirkt weder eine
Verlängerung noch einen Neubeginn der
Garantiezeit.
Eine Garantieleistung entfällt für Schäden
oder Mängel die durch unsachgemäße
Handhabung oder durch äußere Einwirkung
(Sturz, Schlag, Wasser, Staub,
Verschmutzung oder Bruch) herbeigeführt
wurden. Verschleißteile (z.B. Akkus) sind von
der Garantie ausgenommen.
Gembird Europe B.V.
Wittevrouwen 56, 1358CD Almere, The
Netherlands
www.gembird.nl/service
support@gmb.nl
GEMBIRD Deutschland GmbH
Coesterweg 45, 59494 Soest
Deutschland
www.gembird.de
Wenn Sie Hilfe im Umgang mit unseren Produkten
benötigen, können Sie uns kostenlos via E-Mail an
support@gembird.de oder über unser Hilfe-Forum
erreichen: http://gembird-support.de/

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
Op de aankoopbon moeten de aankoopdatum en
productomschrijving duidelijk vermeld staan.
Gelieve de aankoopbon de gehele
garantieperiode te bewaren, deze is ten alle
tijden benodigd voor alle garantie aanspraken.
Tijdens de garantieperiode zullen alle gebreken
verholpen of vervangen worden door de fabrikant
d.m.v. reparatie, omruiling van het defecte
onderdeel of het gehele apparaat. Aanspraken
tijdens de garantieperiode leiden niet tot
verlenging hiervan. Garantieaanspraak vervalt bij
schade of gebreken die ontstaan zijn door
oneigenlijk gebruik, misbruik of invloeden van
buitenaf (vallen, stoten, water, stof, vuil of
breken). Slijtagegevoelige onderdelen (b.v.
batterijen) zijn uitgesloten van garantie. Bij
ontvangst van de RMA goederen behoudt
Gembird zich het recht om te kiezen tussen
vervanging van de defecte waren of het uitgeven
van een kreditnota. Het bedrag van de kreditnota
zal altijd gecalculeerd zijn op basis van de
huidige marktprijs voor het defecte produkt.
Le talon de garantie doit énumérer clairement la date
d'achat et le type d'appareil.
Conservez le reçu d'achat pendant toute la durée de la
garantie car elle est nécessaire pour toute réclamation.
Au cours de la période de garantie tous les défauts
doivent être remplacé aux frais du fabricant, soit par la
réparation ou la remplacement de la pièce défectueuse
ou l'ensemble du produit. Les travaux effectués sous
garantie ne prolongent pas la période de garantie ni ne
commencent pas une nouvelle période de garantie.
Le fabricant se réserve le droit d'annuler toute demande
de garantie pour les dommages ou défauts dus à une
mauvaise utilisation, abus ou les effets externes (chute,
choc, pénétration de l'eau, la poussière, etc..).
Les pièces d'usure (par exemple les piles rechargeables)
sont exclus de la garantie.
Dès réception de la marchandise sous garantie, le SAV
de Gembird Europe BV se réserve le droit de choisir
entre le remplacement des produits défectueux ou de
délivrer un avoir.
Le montant d’avoir sera toujours calculée sur la base de
la valeur actuelle du marché des produits défectueux.
Gembird Europe B.V.
Wittevrouwen 56, 1358CD Almere, The Netherlands
www.gembird.nl/service
helpdesk@gembird.nl
Tel: 0900-GEMBIRD
(€ 0,25 p/m binnen Nederland, exclusief mobiele
telefoonkosten)
Gembird Europe B.V.
Wittevrouwen 56
1358CD Almere, The Netherlands
www.gembird.nl/support
gembird@letmerepair.fr
+33(0) 251 404849
Prix d'appel depuis telephone fixe Pays-Bas : 0.15 euro / min
Prix d'appel depuis telephone mobile / autre pays - selon
operateur

GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
WNP-UA300P-01
HIGH POWER USB WIFI ADAPTER
УМОВИ ГАРАНТІЙНОГО ОБСЛУГОВУВАННЯ
1. Гарантийное обслуживание предоставляется в течение
срока гарантии, при наличии правильно и четко заполненного
гарантийного талона, и изделия в полной комплектации.
Серийный номер и модель изделия должны соответствовать
указанным в гарантийном талоне.
2. Гарантийное обслуживание представляет собой бесплатное
устранение всех неполадок (ремонт), или замену изделия на
новое (аналогичное).
3. Гарантия не распространяется на неисправности,
вызванные следующими причинами:
• использование изделия не по назначению.
• нарушение условий эксплуатации, хранения или перевозки
изделия, которые указаны в настоящей инструкции.
• подключение нестандартных или неисправных периферийных
устройств, аксессуаров.
• механические повреждения, попадание внутрь изделия
посторонних предметов, веществ, жидкостей, насекомых.
• ремонт изделия не уполномоченными на то лицами.
4. Комплектность и внешний вид изделия проверяются
Покупателем при получении товара в присутствии персонала
фирмы.
Послепродажные претензии по укомплектованности и
внешнему виду не принимаются.
Наименование изделия: ___________________________
Модель _________________________________________
Серийный номер _________________________________
Срок гарантии ___________________________________
Дата продажи «____» ___________________ 20____ года
Фирма-продавец: _________________________________
Адрес и телефон фирмы-продавца:
________________________________________________
М.П. С условиями гарантии ознакомлен и согласен:
Продавец: _____________ Покупатель: _____________
1. Гарантійне обслуговування надається протягом терміну
гарантії, при наявності Гарантійного талону, заповненого
належним чином, та виробу в повній комплектації.
2. Гарантійне обслуговування не підтримується в разі
порушення правил експлуатації, зберігання або перевезення
виробу, що зазначені в інструкції по експлуатації виробу.
3. Гарантійне обслуговування скасовується у випадках:
- наявності механічних пошкоджень або слідів стороннього
втручання;
- пошкодження викликані стихійним лихом або нещасним
випадком, включаючи й блискавку, потраплянням у виріб
сторонніх предметів, рідин, комах, тощо;
- пошкодження викликані застосуванням або підключенням
нестандартних або несправних периферійних пристроїв,
аксесуарів;
4. Гарантія не поширюється на витратні матеріали та додаткові
аксесуари;
З гарантійними умовами згоден.
Підпис покупця: ____________________
ГАРАНТІЙНИЙ ТАЛОН № __________________________
Товар/модель ____________________________________
Серійний номер __________________________________
Термін гаранії ____________________________________
Дата продажу ____________________________________
Продавець (назва, телефон)
_________________________________________
Печатка та підпис продавця
_________________________________________
З гарантійних питань звертайтесь до сервісних центрів
Gembird. Про адреси та контакти Ви можете дізнатись на сайті
www.gembird.ua або по телефону 044-4510213.