Gembird DCAM-005 User guide

Gembird

DCAM-005

English

1: Product Description

1.1 Product structure

1) up button 2) menu button 3) down button

4) USB data interface 5) bracket mounting holes 6) HDMI output

7) Power switch 8) microSD card slot 9) the LOCK button

10) Mode selection button 11) OK / confirm button

1.2 Description of the function keys:

1) Button up - In standby mode or in video m o d e you can use this button to zoom in. The button is
also used to scroll within the menu’s.

2) Menu button - Short-Press to bring up the fist tab of the menu. A second press will open the second
tab.

3) Button down - In standby mode or in video m ode you can use this button to zoom out. The button is
also used to scroll within the menu’s.

4) USB connection - USB data interface for:
(1) connecting to a PC
(2) connecting an external power supply to charge the battery

5) Bracket mounting hole – To connect the car bracket

6) HDMI output interface - To connect to high-definition display devices with HDMI cable (not included)

7) The power switch - Long press on / off - Short press toggles front LED lights.

8) MicroSD card slot – Input your memory card here

9) The “LOCK” button – Pressing this button, saves the currently recording video fragment, so it can
no longer be deleted automatically by the camera.

10) The mode select button – a short press to switch between each of the camera modes: video/ photo /
playback.

11) OK button – When in video mode this button acts as the “REC & stop” button. When in photo mode
–short press – to take a picture. When in a Menu – use this button to confirm selection.

1.3 Special Function Description:

The G-sensor function

When there is an abrupt acceleration (e.g. acci dent) up to 6g (1g = 9.80 m / sec

2

), the camera will

automatically save the current video, so it can no longer be deleted automatically by the camera.

LOCK function
Pressing this button, saves the currently recording video fragment, so it can no longer be deleted

automatically by the camera.