Bluetooth headset
BTHS-002 BLUETOOTH HEADSET
Bluetooth headset
Disclaimer
• We spared no efforts to make sure that the information in this manual is correct and
complete. However no liability is accepted for any errors or omissi ons. Gembird
Electronics reserves the right to change the sp ecifications of the hardware and
software described in this manual with out prior notice.
• No part of this manual may be reproduced, tr ansmitted o r translated i n any language
in any form, by any means, without the prior written permission of Gembird
Electronics Ltd.
• Gembird Electronics makes no warr anties for damages resulting from co rrupted or lost
data due to a mistaken operation or malfunction of the product, the sof tware,
personal computers or peripheral devices.
Gembird® is a registered trademark of GMB Tech (Holland) bv.
Other names or products not mentioned above may be registered trademarks or
trademarks of their respective owners.
Copyright © 2006 Gembird Electronics Ltd. All rights reserved.
Bluetooth headset
BLUETOOTH HEADSET
USER MANUAL
Thank you for choosing our BTHS-002 Bluetooth Headset. This manual will help you ins tall
and use it properly. The product has been quality tested to ensure its reliability and
suitability for your needs. The Headset uses 2.4GHz Bluetooth
wireless communication with all Bluetooth audio enabled mobile phones and other devices
that support a Bluetooth headset and/or hands free profiles. Its stylish and compact design
combined with a range of practical applications m akes this Bluetooth Headset the only
Bluetooth Headset you will ever need.
Introduction
TM
Technology to provide
o Bluetooth Headset
o AC Mains Charger
o Ear Hook
o User Manual
Bluetooth headset
Package contents
Bluetooth headset
Buttons and controls
Operating instructions
1. Charging the Bluetooth Headset
Connect the AC charger to the wall socket (the charger supports 100- 240 V and is suitable
for usage in Europe, Asia, USA and other countries), then connect the yellow tipped DC
plug into the Bluetooth headset's DC jack (mini charging jack) to comme nce charging.
During the charging the red indicator on the headset will first light up, then gradually fade
and finally switch off once charg ing is complete (in approximately 3 hours).
Bluetooth headset
2. Pairing
Pairing is the creation and exchange of a link key between two Bluetoo th d evices.
Both devices use the link key for future authenticatio n when exchanging information, in
order to successfully pair the Bluetooth headset with the Bluetooth mobile phone and other
Bluetooth devices such as PCs and notebook com puters (for Bluetoot h version 1.1). The
Bluetooth headset supports SCO (Synchronous Connection Oriented link) and ACL
(Asynchronous Connection Less) and has a transfer speed of 1 Mbps/sec.
For your convenience we have given some extra functions to the transparent 'Mode' button
on the Bluetooth headset, the table below explains how some of these extra features can
be used simply by pressing the 'Mode' button for a period of time:
Function Time required Description Comments
Switching BTHS-002 on Approximately 5 seconds The green indicator will light up
every 4 seconds
Pairing mode (pairing
code is 1234)
Approximately 10 seconds Will emit a se ries of flashing
green and red lights
You will hear a beeping sound as
BTHS-002 turns on
During pairing mode the green and red
indicator light will flash for approximately 1
minute
Bluetooth headset
Switching the Bluetooth
headset off
Volume mute Click and hold down the
Redial Click and hold down the
Answer a call Click the button once as
End a call Click the button once
Reject a call Click and hold down the
Re-connect to Bluetooth
device
Voice control Click the button once while
Approximately 5 seconds Will emit a red indicator light
volume adjustment button
(‘+’&’-‘) for 3-4 seconds
volume adjustment button
(’-‘) for 3 seconds
the call is coming t hrough
during the call
button for 3 seconds
Click the button once and
then click the button again
after 3 seconds
the Bluetooth headset is in
standby mode
which will stop once the
headset is off
The Bluetooth headset will
mute the call
Redials the last call made from
the mobile phone
Answers the incoming call
Ends the current call
Reject s the incoming call
Will reconnect paired Bl uetooth
devices if they have been
disconnected
Voice can be used for dialing,
redialing and answering calls
Once the headset is switched off, the
mobile phone will use its own speaker for
the sounds
The mobile phone has to support the
Bluetooth redial function
Green indicator light will flash twice every
one second until the Bluetooth headset is
reconnected to the Bluetooth dev ices
The mobile phone has to suppo rt this
function
Follow the instructions in the table above and prepare the Bluetooth headset for pairing
(when the headset is ready it will emit a series of flashing green and red lights). Then turn
Bluetooth headset
the Bluetooth mobile phone on and follow the user manual supplied with the Mobile phone
to commence pairing. The mobile phone will display ‘BT headset' once the B luetooth
headset has been detected. You will then be prompted to enter the passkey (1234) to
complete the pairing.
a) Volume control
To adjust the volume of the Bluetooth headset, please use the volume control
buttons with the '+' and '-' symbols on the head set. To increase the volume of the
headset please, press the '+' button, to decrease the volume, press the '-' button.
b) Listening to MP3 music
If your computer is Bluetooth enabled or is equipped with a Bluetooth dongle, you
can listen to your MP3 or other audio f iles on your computer with your Blueto oth
headset after pairing.
c) Wearing the Bluetooth headset
Place the ear hook around your ear (as illustrated below) and insert the ear piece into
you ear. Point the microphone downwards 45˚ for optimum comfort and sound
quality.
Bluetooth headset
p
t
(
)
P
Ergonomically designed, the ear hook can be placed on bot h sides of the heads et so
that the product can be used on both the left and the rig ht ear.
Technical specifications
Bluetooth Version Compliant with Bluetooth version V1.1
Effective range 10 meters
Frequency 2.4GHZ-2.4835GHZ ISM Band
Connection Point to
Talk time 3.0 hours
Standby time 100 hours
TX 0dBm
Encryption 128 bit encryption
ower consumption Talking mode 20mA, standby mode 500uA
oin
Class II
Bluetooth headset
g
A
A
Battery Rechargeable Lithium 120mAh
Charging 5V DC input/100-240V AC adapter
Charging 2 to 3 hours
Operating temperature -10 to 55 degrees
Storage temperature -20 to 60 degrees
Certifications CE,FCC and BQB
Passkey 1234
Dimensions 70*22*26 mm
Weight 15
ccessory
Pairing One to one, can be paired to multiple Bluetooth device but can only be used
o The Bluetooth headset is not suitable for use in or storage in areas with extreme
heat and humidity.
o Please recharge the Bluetooth headset with the provided charger, since
non-approved charger might cause damage to the headset.
C charger
with one device at a time
Note
Bluetooth headset
Troubleshooting
Problem description Troubleshooting
Unable to switch the headset on -Click and hold the ‘Mode’ button for aproximately 5 seconds
-Recharge the headset
No audio after pairing -Ensure that you are within the distance of 10 meters from the phone
-Remove pairing and start pairing again
Red indicator light is on -Recharge the mobile phone
Charging indicator does not light up -Check the physical connection of the charger and the DC jack
-The Bluetooth headset might need a short period of time to re cover
from prolonged usage. After a certain time the charging indicato r
should light up
Bluetooth headset switches off automatically -Switch the Bluetooth headset on
-Recharge for 2 to 3 hours
Echo is heard -Adjust the volume
-Move to a different location
Bluetooth headset
Noise is heard -Change the distance between the mobile phone and the headset
-Move to a different location
Voice low volume by talking -Point the microphone towards you
Regulatory Information
European Community Notice
We hereby declare that this Biuetooth Headset is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. Products bearing the
CE marking comply with the R& TTE Dir ective (1999/5/EC), EMC Directive (89/336/ EEC),
and/or the Low Voltage Directive (73/23/EEC) issued by the commission of the European
Community Compliance with these directives implies conformity to the following European
Norms (in parentheses are the equivalent international standards and regulations):
o EN 60950 (IEC60950) Product Safety.
o ETS 300 328 Technical requirements for radio equipment.
o EN 301 489-17 General EMC requirements for radio equipment.
This product may be used in all EU and EF TA countries.
Loading...