USB 5.1 surround
headset
5.1 Channel USB headset
USB 5.1 surround headset
USB 5.1 surround
headset
Disclaimer
• We spared no efforts to make sure that the information in this manual is correct and
complete. However no liability is accepted for any errors or omissions. Gembird
Electronics reserves the right to change the specifications of the hardware and
software described in this manual without prior notice.
• No part of this manual may be reproduced, transmitted or translated in any language
in any form, by any means, without the prior written permission of Gembird
Electronics Ltd.
• Gembird Electronics makes no warranties for damages resulting from corrupted or
lost data due to a mistaken operation or malfunction of the product, the software,
personal computers or peripheral devices.
Gembird® is a registered trademark of GMB Tech (Holland) bv.
Other names or products not mentioned above may be registered trademarks or
trademarks of their respective owners.
Copyright © 2005 Gembird Electronics Ltd. All rights reserved.
USB 5.1 surround
headset
Introduction
Thank you for buying the Gembird®
USB 5.1 surround headset! This manual will help you
install and use it properly.
The AP-5.1 is a 5.1 channel, high sound quality headset with microphone and USB
interface with the following main features:
o 5.1 channel
o High sound quality
o Adjustable microphone
o Volume control
o Plug and play
o Soft leather ear pads
Package contents
Please check the following package contents of your USB 5.1 surround headset:
o 1 x Headset with microphone
o 1 x CD with software
o 2 x User manual
AP-5.1 User manual
USB 5.1 surround
headset
Software requirements
o Windows 98SE, ME, 2000, or XP
o Direct 3D
Hardware requirements
o USB 1.1 and 2.0
o Intel Pentium III, AMD K6 500 CPU or above
o At least 64 MB RAM (Win98SE) or 128MB RAM (WinME, Win2000 and WinXP)
o At least 50 MB hard disk space
USB 5.1 surround
headset
Important
Before installing Xear 3D audio, plug in the USB 5.1 Headset first. Always use the same
USB PC connector for the USB 5.1 Headset to automatically start the Xear 3D software
when the headset is plugged in.
Software installation
1. Turn on the PC system and connect the USB 5.1 Headset to a USB connector.
2. Insert the installation CD into your CD drive. If auto run is activated, the setup
program will start up automatically. Otherwise, start the setup program “setup.exe”
from the CD drive by hand.
USB 5.1 surround
headset
If this message appears, please Plug-In the USB 5.1 first, wait a few seconds until the
headset is recognized, and continue the installation by clicking “OK”.
USB 5.1 surround
headset
3. Click the “Next” button to continue the installation.
Select “Install USB Audio Driver” for installing the Xear 3D driver software. Selecting
“Install 3D Audio Program” installs two simple, non-violent 3D sound demo
applications, a helicopter game and a rock shooting game. They can be started from the
“Start Menu” – “USB Audio”. Click “Next” to continue
USB 5.1 surround
headset
4. Set up will install the application into the default path and folder.
Loading...