Gembird 3DP-CLN1.75-01 User Manual

Plastic filament for cleaning 3D printer nozzle, 1.75 mm
diameter

3DP-CLN1.75-01

-

Cleaning filament comes in a semi-transparent white color and
it is used to clean the 3D printer’s nozzle by directly removing
residual material inside it

Features

-

Directly remove residual material inside the printer.

-

To be applied to avoid nozzle plugging issues during the
transition between filaments with higher and lower melting
points

Packaging

Q'ty in crtn, pcs
Crtn volume, CUM
Crtn weight, kgs
Individual package size LxWxH:
Carton size LxWxH:
Country of origin
Barcode
Customs code

50

0.036
6
165x165x15 mm
440x440x185 mm
CN
8716309094931
3916909000

Specifications

Material: polymer, 1.75 mm diameter
Weight: 100g/coil ( 0.22lbs)
Length: approx. 40 m
Density at 21.5 °C: 0.91 g/cm3
Melt Flow Index at g/10min 230°C/2.16kg: 13
Melt Point: 160 280 °C
Heat-Deflection-Temperature: 50°C (1.8Mpa 120°C per hour)
Tensile Strength: 23 Mpa
Impact Strength: >40 KJ/m2
Ensile Break: 6 %
Diameter: 1.75 ± 0.05 mm

System requirements

A 3D printer with 1.75 mm extruder of temperature from 160°C to
280 °C

Certificates

Copyright © 2009–2018, Gembird Software Ltd.