IRIDIUM Stage Studio
Manual Zoom Fresnel
USER MANUAL
For safety, please read this user manual carefully before initially start-up
1
CONTENTS
1. Introduction ..................................................................................... 2
2. Safety instructions ............................................................................ 3
3. Description ....................................................................................... 4
Products features ............................................................................... 4
Overview ............................................................................................ 4
4. Installtion ......................................................................................... 5
Overhead rigging ................................................................................ 5
DMX512 connection ........................................................................... 5
Power Input ....................................................................................... 6
5. Operation ...................................................................................... 6-8
Control board ..................................................................................... 7
DMX modes ....................................................................................... 8
2
6. Replacing the fuse ............................................................................ 8
7. Technical specification ...................................................................... 9
1. Introduction
Thank you for purchasing our product. Before carrying out any
operations with the product, carefully read this instruction manual and
keep it with cure for future reference. It contains important information
about the installation, usage and maintenance of the unit. Please strictly
follow it.
The product conforms to the international standard DMX512
agreement. The products can be controlled in signal use and also can be
controlled in many units. Sleek and stylish, precise and accurate optical
system design, bring and clear light effects. All above makes our products
applicable to be used within the scope of film and television, theater, live
3
events, trade show exhibits, educational facilities, retail environments,
and corporate shows, etc.
* The product is compliance with the CE & ROHS Standard.
* The product belongs to our company. The intellectual property is
exclusively reserved. We will file a lawsuit on condition that it is illegally
copied and imitated.
2. Safety instructions
WARNING
• Do not open this device, there is no user-serviceable parts inside.
Risk of electric shock.
4
• Do not look at the light source when the device is on.
• CAUTION: This unit's housing may be hot during and after operation.
• Install this device in a location with adequate ventilation, at least 20
inch (50 cm) from adjacent surfaces.
• Do not leave any flammable material within 50 cm of this unit while
operating or connected to power.
• Use a safety chain when mounting this device overhead.
• Do not operate this device outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
• Do not operate this device if the housing, lenses, or cables appear
damaged.
• Do not connect this device to a dimmer or rheostat.
• ONLY connect this device to a grounded and protected circuit.
• ONLY use the hanging bracket to carry this device.
• In case of a serious operating problem, stop using immediately.
• The maximum ambient temperature is 104° F (40° C). Do not operate
this device at higher temperatures.
5
3. Description
Product features
• Made by fire-resistant Nylon material and Aluminum which makes
the lamp more lighter
• Good performance of cooling system with the quiet fan
• DMX controlled operation, possible work with any commercial
DMX512 controller
• Rail-type hanging bracket, bracket position can be adjusted
•
• Different dimmer curves and dimmer speed adjustable
• Flicker free projection
• Rotatable barn doors, color filter optional
• Ready for connection with power cord with safety-plug
Overview
6
4. Installation
This device can be mounted in many orientations provided each
individual device is secured by the use of correct mounting bracket.
Overhead rigging
The installation of the device has to be built and constructed in a way
that it can hold 10 times the weight for 1hour without any harming
deformation.
The installation must always be secured with a secondary safety
attachment. This secondary safety attachment must be constructed in a
way that no part of the installation can fall down if the main
7
attachment fails.
The operator has to make sure that safety-relating and
machine-technical installations are approved by an expert and before
taking into operation for the first time and after changes .
Please note: for overhead rigging in public or industrial areas, a series
of safety instructions have to be followed that this manual can only give
in part.
DMX512 connection
Please use xlr-xlr signal cable connect the DMX output of the controller
with the DMX input of the first device, and connect the DMX output of
the first device with the DMX input of the second device, always connect
one output with the input of the next device untill all devices are
connected.
For better signal receival, a signal amplifier suggest to be used for each
20 fixtures.
Power input
8
This device has an auto-switching power supply work with input voltage
range of 100-240V AC, 50/60Hz. Link up to the maximum 8A, Do not
exceed this.
5. Operation
Control board
9
Press the Menu until one of the following had been displayed:
Menu
1st Menu
2nd Menu
Value
Notes
DMX
DMX address
0-512
Set DMX address
Channel
CH01
0-255
Dimmer
CH02
0-255
DimmerFine, 5% brightness
increased based on 01CH
CH03
0-255
Strobe
Manual
Dim
0-255
Dimmer
D_F
0-255
DimmerFine
STO
0-255
Strobe
Reset
YES/NO
Recover to manufactory
default
Temperature
C.000
0-255
Current temperature
T.080
Protecting temperature
Use ‘Up’ and ‘Down’ button to select your desired operation, press
‘Enter’ to set all function
Notes:
10
When there’s a flickering ‘!’ sign appeared, means no signal input for
the fixture.
No operation within 30seconds, LCD display will enter into Screen
protection mode automatic.
When the current temperature is higher than the protecting setting
temperature, 30% of power consumption will be deducted slowly;
Power consumption will be coming to normal when the temperature
gets to normal.
DMX Modes
DMX512 Channel table
1CH Channel table
Channel
Value
Rate
Control function
CH1
Dimmer
0-255
Dimmer, brightness from 0%
2CH Channel table
Channel
Value
Rate
Control function
CH1
Dimmer
0-255
Dimmer, brightness from 0%
CH2
DimmerFi
ne
0-255
Brightness micro adjustment
3CH Channel table
Channel
Value
Rate
Control function
CH1
Dimmer
0-255
Dimmer,brightness from 0%
11
CH2
DimmerFi
ne
0-255
Brightness micro adjustment
CH3
Strobe
0-255
0-10 Strobe off, 11-255 Strobe
frequency(from slow to fast)
6. Fuse Replacement
If the fine-wire fuse of the device fuses, only replace the
fuse by a fuse of same type and rating. Before replacing
the fuse, unplug mains lead.
Procedure:
Step1: Unscrew the fuse holder on the rear panel with a fitting
screwdriver from the housing (anticlockwise).
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing and fix it.
7. Technical specifications
Item Number:
113776
Product name.:
IRIDIUM Stage Studio Manual Zoom Fresnel
Power Consumption:
200W
Voltage:
100 - 240V AC
12
Frequency:
50/60Hz
Light Source:
200W COB Citizen led
Lens:
150mm Fresnel lens
Color temperature:
3200K
CRI:
>90
Beam Angle:
12°～55°
Dimming Range:
16bit smooth dimming 0-100%
DMX Channel:
1CH/2CH/3CH Optional
Control system:
STM32 control chip, DMX512 signal
Display Screen:
4-Button LCD Screen
IP Rating:
IP20
Min. Distance to
Illuminated object:
1M
Ambient Temp.:
-15℃～35℃
Product size:
360x270x427mm
Weight:
5.8kgs
Packing:
1pc per carton
Packing size:
Inner box: 420x330x360mm
Loading...