GE Lighting A19 FC IIT User Manual

User Instructions - Made for Google Version

EASILY SET UP YOUR C BY GE SMART BULB

1. Plug in your Google Home Device.

2. Screw in your C by GE Smart Bulb in the same room as your Google Home device.

3. Turn on the light.

4. Download the Google Home app to set up your Google Home device and light bulb.

Don’t have a Google Home device? Simply screw in your smart bulb, download the C by GE app
and sit back and see life in a whole new way.

User Instructions - Standard Version

EASILY SET UP YOUR C BY GE SMART BULB

1. Download the C by GE app.

2. Screw in your C by GE Smart Bulb and turn on.

3. Tap he “+” icon and follow the set up instructions.

To set up voice the out of home control, pair your C by GE Smart Bulb in the C by GE app with a
C-Reach Smart Bridge and a voice assistant (sold separately).

For set up help, visit cbyge.com

FCC requirements:

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to c om ply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures :

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled envir onm ent. Thi s equipment should be installed and oper at e d with
minimum distance 20cm between the radiator & your body

ISEDC Requirements:

This device complies with Innovation, Science, and Economic Development
Canad licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may

cause undesired operation of the device.
Le présent appareil est conforme aux CNR d' Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le
brouillage est susceptible d'en compromettre le fonctionnement.
The device is compliance with RF exposure guidelines, users can obtain
Canadian information on RF exposure and compliance.The minimum distance
from body to use the device is 20cm.
Le présent appareil est conforme
Après examen de ce matériel aux conformité ou aux limites d’intensité de champ
RF,
les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and
compliance d’acquéri r
les informations correspondantes. La di st anc e mini mal e du corps à uti li s er le
dispositif est de 20cm.