Page 1 / 10
NewPac BM1387 USB Stick Miner User Guide
Last updated: 2019/02/01
Page 1 of 10
GekkoScience / MinersSupply
NewPac BM1387 USB Stick Miner
Instruction Manual & User Guide
Official Manufacturer Support Forum:
GekkoScience NewPac Support Thread:
https://bitcointalk.org/index.php?topic=5053833.0
Page 2 / 10
NewPac BM1387 USB Stick Miner User Guide
Last updated: 2019/02/01
Page 2 of 10
Contents
1. The First Glance ........................................................................................... 3
2. Accessories & Connection .............................................................................. 3
3. Setup (Wndows) ........................................................................................... 4
4. Setup (Linux) ................................................................................................ 6
5. Setup (Debian) ............................................................................................. 6
6. Basic Troubleshooting .................................................................................. 7
7. VCore Frequency and Power Draw/Current ................................................. 9
8. Acknowledgements ................................................................................... 10
Page 3 / 10
NewPac BM1387 USB Stick Miner User Guide
Last updated: 2019/02/01
Page 3 of 10
1. The First Glance Currently the most efficient USB miner ever manufactured, the
N e w P a c features two Bitmain BM1387 ASIC chips (this is the same
chip as in the Bitmain Antminer S9). It has a fully adjustable regulator design
that gives you a core voltage range of 550mV to 830mV. Typical hashrate
is 35+Gh/s depending on clock rate. Expected performance can be
calculated using the following formula: 0.228 * MHz = GH
2. Accessories & Connection
2.1 Accessories
You will need a powered USB hub capable of supplying at least 1.0
- 2.0+ amps per port. The GekkoScience USB Hub was engineered
for these miners, & is highly recommended!
2.2 Connection
a)
Connect your USB hub to your host computer. Make sure the power
adapter is plugged in as well.
b)
Insert the NewPac BM1387 USB Stick Miner into the USB hub via
the USB port. Please note:
Connection order must be “a)” first, and then “b)”. Order cannot be
reversed.
Page 4 / 10
NewPac BM1387 USB Stick Miner User Guide
Last updated: 2019/02/01
3. Setup (Windows) Download cgminer and zadig winUSB driver to your computer. VH Modified cgminer from here:
http://23.108.83.14/images/cgminer-4.11.1-windows-gekko-3339a51.7z
Zadig WinUSB Driver:
http://zadig.akeo.ie/
Page 4 of 10
1> Plug in your NewPac BM1387 USB miner.
2> Open Zadig and click “Options -> List All Devices”
Page 5 / 10
NewPac BM1387 USB Stick Miner User Guide
Last updated: 2019/02/01
Page 5 of 10
3> Select NewPac BM1387 Bitcoin Miner, and then click “Replace Driver”
4> If it is successful you will see the following message:
5> Run cgminer following commands below:
cgminer.exe --gekko-newpac-freq 100
-o stratum+tcp://solo.ckpool.org:3333
-u (your username here) -p (your password here)
- Enable AsicBoost With the Following Flag: --gekko-newpac-boost
ATTN: Not every mining pool accepts AsicBoost enabled mi ners, and will need turned OFF
in order to connect with a pools that do not support AsicBoost. Please check with your pool
operator and/or dis able AsicBoost by removi n g th e syntax –gekko-newpac-boost
Page 6 / 10
NewPac BM1387 USB Stick Miner User Guide
Last updated: 2019/02/01
Now, compile all syntax (commands /codes) to run cgminer:
Page 6 of 10
- In the same folder you downloaded the VH/Gekko version of cgminer, create a new Notepad/.txt file, and add the following text (some of which you will need to change, according to your mining pools instructions):
cgminer.exe -o stratum+tcp://stratum.kano.is:3333 -u your.username -p x --gekko-newpacfreq XXX --gekko-newpac-boost
[replace "-o" with your pool, "-u" with your username, "-p" with your password, "XXX" with desired
frequency (i.e. 250), remove AsicBoost syntax when mining on pools that do not support AsicBoost]
- Now, click "Save File As", change from ".txt file" to "all files", and name as
follows: whatever-name-u-want.bat
- Double click the file you just created, and cgminer should appear on
your screen, and begin mining
ATTN:
[Most major mining pools offer specific instructions on how to fill the information in your .bat/command line
file with the required pool informati on. Please use the official manufacturer support thread for usage
instructions and examples. Questions are generally answered within hours!]
Page 7 / 10
NewPac BM1387 USB Stick Miner User Guide
Last updated: 2019/02/01
4. Setup (Linux) [Visit Support Thread for Updated Instructions] Linux cgminer build steps
Ubuntu 16.04.1 LTS new install.
Default Install (+OpenSSH server)
Code:
sudo apt-get update
sudo apt-get upgrade -y
sudo apt-get install -y build-essential git autoconf automake libtool pkg-config libcurl4-openssl-dev libudev-dev
mkdir -p git/vthoang; cd git/vthoang
git clone https://github.com/vthoang/cgminer.git
cd cgminer
CFLAGS=”-O2 -march=native” ./autogen.sh --enable-gekko
make -j 2
Page 7 of 10
5. Setup (Debian) [Visit Support Thread for Updated Instructions] Debian 8.7.1 new install. Default Install (No desktop environment, + SSH Server)
(*do not specify root password to enable sudo) or Raspbian - Kernel version: 4.4 (Raspberry Pi) Code:
sudo apt-get update
sudo apt-get upgrade -y
sudo apt-get install -y build-essential git libusb-1.0-0-dev libusb-1.0-0 libcurl4-openssl-dev libncurses5-dev libudev-dev screen
libtool automake pkg-config libjansson-dev
mkdir -p git/vthoang; cd git/vthoang
git clone https://github.com/vthoang/cgminer.git
cd cgminer
CFLAGS=”-O2” ./autogen.sh --enable-gekko
make -j 2
Page 8 / 10
NewPac BM1387 USB Stick Miner User Guide
Last updated: 2019/02/01
Page 8 of 10
6. Basic Troubleshooting (Q&A)
Q: Does the miner need cooling?
A: If you run the mine rs over about 100MHz it is strongly advised to cool them with
a fan. The cooling requirements are fairly low and unless you’re trying to run
200MHz or above almost any fan at all will do.
Q: Can I run this cgminer build with the original Compac? A: Yes. The original Compac will register with separate device name from the
2pac.
Q: How can I set a different frequency for the 2Pac, Compac, or NewPac? A: cgminer will accept the following parameters for the stick.
--gekko-2pac-freq 150 or --gekko-newpac-freq 100 or --gekko-compac-freq 100
Q: How many NewPac sticks can I run at a time? A: You can run as many as your USB hub can power. Please remember you will
need a powered USB hub that can do 1-2 amps per port for all the ports you wish
to use.
Q: How do I get the latest version of the driver and code? A: Updates to main cgminer and gekko updates will be checked in regularly.
If you are following along with the instructions, enter the cgminer directory, pull and
rebuild:
cd ~/git/vthoang/cgminer/
git pull
...
Q: How to get past the “USB init, open device failed” and “you don’t have privilege to access” ?
A: Use the following code:
cd ~/git/vthoang/cgminer/
sudo usermod -G plugdev -a `whoami` sudo cp 01-cgminer.rules /etc/udev/rules.d/
sudo reboot
Page 9 / 10
NewPac BM1387 USB Stick Miner User Guide
Last updated: 2019/02/01
7. VCore Frequency, Power Draw/Current, Voltage Adjustment Please refer to the below table for rough guide to power and current draw
according to frequency.
Page 9 of 10
Voltage Adjustment
(for advanced users ONLY, will likely void warranty)
(adjusting voltage for overclocking will void warranty)
:
NewPac BM1387 USB Stick Miner User Guide
Last updated: 2019/02/01
Page 10 of 10
8. Acknowledgements This setup guide could not have been p ut together without the help and
contribution of many people. Big thanks to the following people on
bitcointalk.org forum:
sidehack
vh
rockmoney
MinersSupply
Klintay
Official Manufacturer Support Forum:
GekkoScience NewPac Support Thread:
https://bitcointalk.org/index.php?topic=5053833.0
FOR QUESTIONS, SUPPORT, TROUBLESHOOTING, COMMENTS, A ND
ALL OTHER N EEDS, PLEA SE USE THIS INVALUABLE RESOURCE!
RMA (Return Merchandise Authorization) WILL NOT BE ISSUED
WITHOUT FIRST SEEKING MANUFACTURER & COMMUNITY SUPPORT
FIRST!
Page 10 / 10
Loading...