Geist EM160D, EM160D-B, EM160 User Manual

RSM/RSP/RSE/RSE-B/

RSMINI163/RSMINI/RSMINI-P

User Guide

SiteX HD Series Remote Interface Manual

Description:

a self-contained unit. Web pages, including graphs, are generated from the unit, and monitor power and environmental conditions
within the cabinet. No software other than a web browser is required, and several data formats are available. Models are available
with a wide range of onboard features; not all features are available on each model.

The SiteX HD Series consist of Power Distribution Units and Environmental Monitors with a built in web server in

Specifications (See Unit Label for Ratings):

Networking: HTTP, HTTPS (SSL/TLS), SMTP, POP3, ICMP, DHCP, TCP/IP, NTP, FTP.

Data Formats: HTML, SNMP, CSV/Plain Text, Telnet, WAP, PDA formatted HTML, XML.

EMC Verification: Class A digital device. This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate this equipment.

Receptacle Ratings: NEMA 5-15R 125 Volts, 15 Amps NEMA 5-20R 125 Volts, 20 Amps

NEMA 6-20R 250 Volts, 20 Amps IEC320 C13 125/250 Volts, 15 Amps

Form: GM1063 800-432-3219 www.geistmfg.com Revision Date: 5/30/08

Page 2

Model Options:

Volts

MODEL

RP Series √ √ 4, expandable to 16 √ √ √ √ √ √ √ √ √
RPS (RS) Series √ √ 0 √ √ √
EM160D √ 5, expandable to 16 √ √ √ √ √ √
EM160D-B 5, expandable to 16 √ √ √ √ √ √
EM160 16 √ √ √ √

Power

Distribution

Built In Display

Compatible

Remote Display

# Remote

Sensor Ports

Relative

Temperature

Airflow

Humidity

Light Level

I/O Ports

Sound Level

Amps

Installation:

1. Using appropriate hardware, mount in rack or cabinet.

2. Plug into an appropriately rated and protected branch circuit receptacle.

3. Connect to network using Ethernet connection.

4. Connect any External Sensors (Optional) to the unit.

5. Plug in devices to be powered by PDU.

6. Power on devices to be powered by PDU. Sequential power up is recommended to avoid high inrush current.

Service and Maintenance:

No service or maintenance is required. Do not attempt to open, warranty will be void. No user serviceable parts inside.

Power

Form: GM1063 800-432-3219 www.geistmfg.com Revision Date: 5/30/08