1: GF0021/-27 Display LCD:
2: GF0021/-27 Operating keys:
3: GF0021/-27 Operating keys:
Display
weekday
Display
time or text
menu
Display code
selection
Display direction
(UP /DOWN)
4: GF0021/-27 Menu setup:
In programming mode there is a total of seven menu items. Use
UP/DOWN keys to select options.
Au:Hd (automatic/manual)
A-SZ (programming of
switching times)
Prog
(programming)
Astr
(astro function)
Urlb (holiday)
Grun
Code
Display
„Auto“ (automati
c) or
„Hand“(manual)
Display time shift
Display holiday
function
(reset)
PROG key
Display
UP key DOWN key
To facilate and ease the
programming of the device the
upper section can be removed.
5: Au:Hd (Change-over from manual to automatic
mode):
The current operating
mode is shown on
display
(AU / HA)
Actuate key PROG to
change over from one
mode to the other
Automatic mode
Briefly
displayed
Manual mode
Briefly
displayed
! Actuate the key PROG to change over to the programming mode
! Select menu items with the UP/DOWN keys
! Confirm with the key PROG.
! Actuate the UP/DOWN keys simultaneously to cancel all settings that have
not been confirmed and exit the programming mode.
! If no key is actuated, all previously made changes are cancelled after the
expiry of a 40 second time and the clock returns to normal mode.
6: A-SZ (Programming of the switching times)
Activate/deactivate
switching time
Switching time off
Switching time 2
displayed
Month
Next day
Ready
7: Prog (Programming field):
Submenu with 4 options:
PrSZ = Programming of the
switching times
Zeit = Programming of the time
datu = Programming of the date
Lern = Learning of radio codes
PrSZ= Programming of
the switching times
Zeit = Programming of the time
Datu = Programming of the date
Lern= Code learning and
programming
Hand = Enter code
manually
Auto = Code learning from
transmitter
8: PrSZ (Programming switching time / weekday
Select one day or
The whole week with
Confirm
9: PrSZ (Programming of 4 switching times):
st
1
digit of
the hour
flashes
nd
2
digit of
the minutes
flashes
Astro
function
flashes
nd
2
digit of
the hour
flashes
Switching
channel 1- 4
flashes
Next switching
time
Programming
st
1
digit of
the minutes
flashes
Direction
flashes
Go on
or
Ready
Or wait 40 seconds
10: Zeit (Setting of the time):
hour
100W0660 en 1014
11: datu (Setting of the date):
12: Lern (Learning and programming of codes):
or
13: Astr (time shift):
or
Select direction
select
plus/minus
“- “ =
minus
void =
plus
Change to 1 or 0
Time shift +/- 1 h 59
or
hour
heure
or
minute
or
minut
minute
Switching time
ready
Or wait
40 seconds
Change minute digit
Change minute digit
Change direction
Repeat the operation
Or wait
40 seconds
Ready
or
day
14: Astr (Setting of the degree of latitude):
Following values can be programmed :
44, 47, 50, 52, 54, 56, 57, 58, 59, 60 (Standard = 50°)
or
day
or
month
or
month
or
year
Switching time
Ready
Or wait
40 seconds
Change
Or wait 40 seconds
Ready
or
Switching channel
15: Astr (latitudes / towns):
• 44° - Florenz, Bordeaux, Minneapolis
• 47° - Salzburg, Wien, Angers, Seattle
• 50° - Köln, Mainz, Leipzig, Lilles, Brussels
• 52° - Hannover, Berlin, Amsterdam
• 54° - Hamburg, Vilnius
• 56° - Kopenhagen, Riga
• 57° - Göteborg
• 58° - Stavanger
• 59° - Stockholm
• 60° - Helsinki
in 10 s.
UP
Send
command
Send command
Wait 10 seconds
or simultaneously
in 10 s.
DOWN
16: Codes (Display and selection):
Select code combination
and confirm
with
17: Grun (basic settings):
All settings are deleted !
Back to initial setting:
time and date must be
reset.
18: Urlb (activate/deactivate holiday function):
Press at least 3 seconds
Enter date and time
Loading...