S P E C I F I C A T I O N S
Gehl reminds users to read and understand the
operator’s
Also,
place
Gehl reserves the right to add improvements or make
changes in specifications at any time without notice
or obligation.
For more information on Gehl
or visit gehl.com
A. Overall Operating Height – Fully Raised (mm)
168" (4267)
172" (4369)
175.2" (4450)
B. Height to Hinge Pin – Fully Raised (mm)
127.5" (3239)
128" (3251)
128" (3251)
C. Reach – Fully Raised (mm)
34.5" (876)
37.0" (940)
39.2" (996)
D. Dump Angle – Fully Raised
40.2°
39°
41°
E. Dump Height – Fully Raised (mm)
98" (2489)
95.7" (2431)
91.7" (2329)
F. Maximum Rollback Angle – Fully Raised
102.5°
102.5°
102.5°
G. Overall Height at ROPS (mm)
82.8" (2103)
83.1" (2111)
83.1" (2111)
67.7" (1720)
K. Reach at Specified Height (mm)
31.1" (790)
31.8" (808)
32.0" (813)
L. Dump Angle at Specified Height
75°
75°
75°
M. Maximum Roll bac k Angle at Ground
30°
30°
30°
N. Carry Position (mm)
7" (179)
7" (179)
7" (179)
O. Maximum Rollback Angle at Carry Position
33°
33°
33°
P. Digging Position – Below Ground (mm)
-0.3" (7.6)
-0.2" (5.1)
-0.2" (5.1)
Q. Angle of Departure with Std. c-wt.
30.4°
29.2°
25°
R. Ground Clearance (mm)
13.3" (343)
13" (330)
13" (330)
S. Track Gauge (mm)
51.7" (1313)
51.7" (1313)
51.7" (1313)
T. Track Shoe Width (mm)
12.6" (320)
17.7" (450)
17.7" (450)
U. Crawler Base (mm)
54.8" (1392)
58.4" (1483)
61.5" (1562)
V. Overall Width – Less Bucket (mm)
64.4" (1636)
69.5" (1765)
69.5" (1765)
W. Bucket Width (mm)
65.9" (1674)
73.9" (1877)
83.9" (2131)
X. Clearance Radius – Front With Bucket (mm)
91.4" (2322)
98.1" (2492)
104.7" (2659)
Z. Clearance Radius – Rear w/ Std. c-wt. (mm)
62.1" (1577)
64.6" (1641)
70.7" (1796)
Maximum Rollback at Specified Height
66.8°
66.8°
66.8°
Angle of Approach
90°
90°
90°
Tipping Load (kg)
5000 lbs. (2268)
6000 lbs. (2722)
7143 lbs. (3240)
Operating Weight (kg)
8605 lbs. (3903)
9890 lbs. (4486)
11,595 lbs. (5259)
Type
4-Stroke Naturally Aspirated
4-Stroke Turbo
4-Stroke Turbo
Displacement (L) / cylinders
203 cu.in. (3.3) / 4
203 cu.in. (3.3) / 4
221 cu.in. (3.6) / 4
Gross Power (kW) @ rpm
69.9 hp (52.1) @ 2500
72 hp (53.7) @ 2500
74.3 hp (55.4) @ 2300
Net Power (kW) @ rpm
68.4 hp (51) @ 2500
70.7 hp (52.7) @ 2500
NA
Peak Torque (Nm) @ rpm
179 ft.-lbs. (242.7) @ 1600
217 ft.-lbs. (294) @ 1625
243 ft.-lbs. (330) @ 1500
Oil Pump Capacity (L)
11 qts. (10.4)
11 qts. (10.4)
9 qts. (8.5)
Alternator Voltage / Amperage
14V / 95A
14V / 95A
14V / 95A
Drawbar Pull / Tractive Effort (kg)
11,840 lbs. (5371)
12,359 lbs. (5606)
14,317 lbs. (6494)
Bucket Breakout – Tilt Cylinder (kg)
5189 lbs. (2354)
5492 lbs. (2491)
6294 lbs. (3127)
Ground Speed – Single Speed (km/hr)
5.1 mph (8.2)
5.4 mph (8.7)
5.4 mph (8.7)
Fuel Tank (L)
24 gal. (91)
24 gal. (91)
24 gal. (91)
Coolant Capacity (L)
3.5 gal. (13.3)
3.8 gal. (14.4)
5.1 gal. (19.3)
Auxiliary Hydraulic Flow – Rated Speed (L/min)
18.5 gpm (70.0)
21.8 gpm (82.5)
24.9 gpm (94.3)
High-Flow Hydraulic Flow – Rated Speed (L/min)
34.0 gpm (128.8)
35.9 gpm (135.8)
37.4 gpm (141.6)
Motor Type
Axial Piston with Planetary Gear Box Reduction
Cold Cranking Amps at Temperature
850 CCA @ 0°F (-18°C)
850 CCA @ 0°F (-18°C)
950 CCA @ 0°F (-18°C)
H. Overall Length w/ Bucket – Std. c-wt. (mm) 144.0" (3658) 152.3" (3868)
I.
Overall Length w/o Bucket – Std. c-wt. (mm)
J. Specified Height (mm) 67.5" (1715) 67.7" (1720)
110.8" (2814) 114.5" (2908)
DIMENSIONS
Grouser Height (mm)
Operating Capacity at 35% Tipping Load (kg)
Operating Capacity at 50% Tipping Load (kg)
1" (25) 1" (25)
1750 lbs. (794) 2100 lbs. (953) 2500 lbs. (1134)
2500 lbs. (1134)
CAPACITY
Make/Model
Yanmar / 4TNV98C-NMSL
Tier IV
ENGINE
Track Type / Track Rollers / Roller Type
DRIVES
Track Width (mm)
Ground Pressure (bar)
TRACK
12.6″ (320) 17.7″ (450) 17.7″ (450)
6.2 psi (0.43) 4.7 psi (0.32) 5.3 psi (0.37)
Rubber / 4 / Steel Rubber / 5 / Steel Rubber / 5 / Steel
Bucket Breakout – Lift Cylinder (kg)
FORCES
Ground Speed – Two Speed (km/hr)
Hydraulic Reservoir Tank (L) 11.0 gal. (41.6) 13.8 gal. (52.2) 13.8 gal. (52.2)
4840 lbs. (2195) 5398 lbs. (2449) 6786 lbs. (3078)
7.5 mph (12.1) 7.9 mph (12.7) 7.9 mph (12.7)
VOLUME
Transmission Pump Type Axial Piston Axial Piston Axial Piston
HYDRAULICS
Battery Volts 12V 12V 12V
12
West Bend, WI 53095 U.S.A. | Tel: 262-334-9461 | Fax: 262-338-7517
RT175 GEN:2 RT210 GEN:2 RT250
166.0" (4216)
125.0" (3175)
1" (25)
3000 lbs. (1361)
Yanmar / 4TNV98CT-NMSL
Tier IV
© 2014 Manitou Americas, Inc. Gehl. A Manitou Group Brand. All rights reserved. Printed in the U.S.A. Gehl RT Track Loader_(11-2014)
3571 lbs. (1620)
Deutz / TD 3.6
Tier IV
track loaders
OWNER DRIVEN
Gehl authorized dealers offer a full line
of compact equipment, backed up by
exceptional sales, service and parts
experience.
manual before operating any equipment.
make sure all safety devices and shields are in
and functioning properly.
equipment, call our hotline at
1- 800-628- 0491
REFERENCE
DIAGRAMS
GEHL COMPACT EQUIPMENT
Loading...