Page 1
PREVIEW
KEY FEATURES
ü
Multiple Track Widths and Tread Patterns
ü
Control Choices: T-bar, Pilot Joystick,
Hand/Foot, and Pilot Dual-Hand
ü
IdealTrax AutomaticTM Track Tensioning
ü
High-Flow Auxiliary Hydraulics Available
ü
Swing-out Cooler
RT165
TRACK LOADER
KEY SPECIFICATIONS
ü
1,650 lbs. (748 kg) Rated Operating Capacity
ü
69.9 hp (52.1 kW) Yanmar Engine
ü
119.6" (3038 mm) Height to Hinge Pin
ü
66" (1676 mm) Overall Machine Width
ü
77.5" (1969 mm) Overall Height
Page 2
DIMENSIONS
Overall Operating Height - Fully Raised (mm) 157.8" (4008)
Height to Hinge Pin - Fully Raised (mm) 119.6" (3038)
Reach - Fully Raised (mm) 25.3" (642)
Dump Angle - Fully Raised 39°
Dump Height - Fully Raised (mm) 91.7" (2329)
Maximum Rollback Angle - Fully Raised 98°
Overall Height at ROPS (mm) 77.5" (1969)
Overall Length with Bucket - Std. Counterweight (mm) 126.2" (3205)
Overall Length w/o Bucket - Std. Counterweight (mm) 94.2" (2393)
Specic Height (mm) 64.5" (1638)
Reach at Specic Height (mm) 53.9" (1369)
Dump Angle at Specic Height (mm) 70°
Maximum Rollback Angle at Ground 28°
Carry Position (mm) 7.8" (198)
Maximum Rollback Angle at Carry Position 28°
Digging Position - Below Ground (mm) 2.1" (53)
Angle of Departure with Std. Counterweight (mm) 28°
Ground Clearance (mm) 7.25" (184)
Track Gauge (mm) 53.4" (1356)
Track Shoe Width (mm) 12.6" (320)
Crawler Base (mm) 49.8" (1265)
Overall Width - Less Bucket (mm) 66.0" (1676)
Bucket Width (mm) 66.0" (1676)
Clearance Radius - Front with Bucket (mm) 77.9" (1979)
Clearance Radius - Front without Bucket (mm) 48.7" (1237)
Clearance Radius - Rear with Std. Counterweight (mm) 56.7" (1440)
Maximum Rollback at Specied Height 68.6°
Angle of Approach 90°
Grouser Height (mm) 1" (25)
CAPACITY
Operating Capacity at 35% Tipping Load (kg) 1,650 lbs. (748)
Operating Capacity at 50% Tipping Load (kg) 2,357 lbs. (1069)
Tipping Load (kg) 4,715 lbs. (2139)
Operating Weight (kg) 8,020 lbs. (3638)
ENGINE
Make/Model Yanmar/4TNV98C-NMS2 Tier IV
Type 4-Stroke Naturally Aspirated
Displacement/Cylinders 201.4 cu.in./4 (3.319 L)
Gross Power @ 2500 rpm 69.9 hp (52.1 kW)
Net Power @ 2500 rpm 68.4 hp (51.0 kW)
Oil Pump Capacity 11 qts.
Alternator Voltage/Amperage 14V / 100A
TRACK
DRIVES
Drawbar Pull/Tractive Effort (kg) 9,578 lbs. (4,345)
Track Type/Track Rollers/Roller Type
Rubber/4/Steel
Track Width (mm) 12.6" (320)
Ground Pressure - Narrow / Wide (bar) 6.5 / 5.2 psi (.45 / .36)
FORCES
Bucket Breakout - Tilt Cylinder (kg) 4,230 lbs. (1,919)
Bucket Breakout - Lift Cylinder (kg) 5,060 lbs. (2295)
Ground Speed - Single Speed (km/hr) 6.5 mph (10.5)
Ground Speed - Two Speed (km/hr) 10.0 mph (16.1)
VOLUME
Fuel Tank (L) 16.5 gal. (62.5)
Hydraulic Reservoir Tank (L) 11.0 gal. (41.6)
Coolant Capacity (L)
3.8 gal. (14.4)
HYDRAULICS
Auxiliary Hydraulic Flow - Rated Speed (L/min) 18.9 gpm (71.4)
High-Flow Hydraulic Flow - Rated Speed (L/min) 28.5 gpm (119)
Transmission Pump Type Axial Piston Variable Double Pump
Motor Type Radial Piston Motor w/ Two Speed
Battery Volts
12V
Cold Cranking Amps at Temperature 950 CCA @ 0°
PREVIEW
RT165
TRACK LOADER
SPECIFICATIONS
gehl.com
One Gehl Way, West Bend, WI 53095 Phone: (262) 334-9461
GEHL COMPACT EQUIPMENT
STANDARD FEATURES
● All-Tach
● Anti-Vandalism Protection
● Auxiliary Hydraulics
● Brake Control (Auto / Manual)
● Color Display with Full Instrumentation
● Engine Auto-Shutdown System
● High-Back Adjustable Seats
● Foot and Hand Throttles
● Horn
● Hydraloc
● Hydrostatic Drive - Servo
● Integral Access Plate (removable)
● Lift Arm Support Device
● Operator Restraint Bar
● ROPS/FOPS Level II Overhead Guard
● Sound Reduction Material
● Swing-Out Cooler
● Two Speed Drive
● Work Lights - Front and Rear
®
Attachment Mounting System
™
Safety System
OPTIONAL FEATURES
● Air Conditioning
● Back-Up Alarm
● Cab Enclosure
● Controls: Dual-Hand, Gehl T-Bar, Hand/Foot, Pilot
Operated Joystick
● Counterweight
● Engine Block Heater
● Heating
● High-Flow Auxiliary Hydraulics
● Hydraulic
● Power-A-Tach
™
Ride Control
®
Attachment Mounting System
● Selectable Self-Leveling Hydraulic Lift Action
● Suspension Seat - Air Ride
● Suspension Seat - Mechanical
● Two-Speed Drive
SPECIFICATIONS ARE PRELIMINARY
Gehl reserves the right to add improvements or make changes in features and specications at
any time without notice or obligation.
Gehl reminds users to read and understand the operator's manual before operating any
equipment. Also, make sure all safety devices and shields are in place and functioning properly.
© 2017 Manitou Americas, Inc. Gehl. All rights reserved. A Manitou Group Brand
Loading...