GE - General Electric Mini Contactors Features and Benefits
IEC Power Devices
Mini Contactors Features and Benefits
C-2000
Easy Installation—Captive universal slot screws are standard on
all contactors, relays, overloads, and accessories allowing installation with flat, star, and Phillips screwdrivers. All terminals are in
the open position for production line and installation efficiency.
Accessories are designed for fast installation on either contactors
or relays.
Safety Features—Finger and back-of-hand protection are provided. All screw and quick-connect type terminals are clearly
marked with dual markings where applicable, for easy identification and wiring convenience.
International Acceptance—Devices are listed and certified to
international standards. Nameplate carries both IEC and North
American standards.
Modular Design—One of the most attractive features of this
product family is its modularity. Various configurations can be
created by combining the MC contactors and MCR control relays
with the wide selection of available accessories.
Compact Size—The contactor/relay mounting profile is approximately 1 3/4” x 1 7/8”.
Long Life—The MC/MCR family of contactors and relays offers
superior performance. Mechanical life is rated at 10,000,000
operations. Contactor motor ratings (AC-3) are in excess of
1,000,000 electrical operations.
Reliable Operation—These products are manufactured with the
latest advancements in materials technology and designed to
ensure long, dependable operation. (Coils are designed for protection against burnout during demanding brownout conditions.)
Flexible Mounting—Mounting is not restricted for contactor and
relay applications; contactors may be horizontal-, tabletop-, or
ceiling-mounted. Mounting flexibility is provided by a dual
mounting system using either 35mm DIN rail or two #8 screws
in opposite diagonal corners. The DIN rail release is located at
the top, providing easy access when configured as a starter.
Accessories are easily assembled to the MC/MCR contactors
and relays, saving time while affording maximum versatility.
High Short Circuit Current Ratings for UL508A—MC/MCR family
of contactors UL rated to withstand 50,000 AIC fault when
protected by Class H, L, J, CC or RK-5 fuses providing added
performance to use within UL508A control panels.
Dual markings are provided.
Special Orders—For OEMs and higher-volume applications,
special terminal configurations ar
quick-connect terminals (one 6.3mm Faston or two Faston
2.8mm) and pin terminals for printed circuit boards. Four-pole
contactors with 4NO, 2NO/2NC or 4NC contacts can be ordered.
Lower wattage 1.2w 24 Vdc and 2w 24 Vdc PLC contactor/relay
versions also are available. (See Special PLC-Compatible
Products, page 5-15.)
Bulk pack—In order to save time in higher volume applications,
stock management and facilitate the shipments, bulk packs are
available.
e available, including
5-4
Product Number Selection Instructions: See page 5-6
Control Catalog
Loading...