Page 1
Miniature Circuit Breakers
E2000 Miniature Circuit Breakers
Series CA Auxiliary Switch and Bell Alarm
Applications
—Commercial
—Industrial
Features
—Common for all MCBs
—Can be coupled on both sides of MCBs
—Gold contact version available for low current and low
voltage applications
—Stack up to four CA on left and right sides
—Permits the pass-through of busbars, pin and fork, top and
bottom, by changing the position of the base of the auxiliaries
Performance
Change-over contacts 1 Form C
Rate current In (A) 5
Rated voltage AC Un (V) 240
Electrical endurance 10000
Terminal capacity flexible/rigid cable (mm2) 2.5
Weight (g) 70
Section 7
Functions
Auxiliary contacts are units to be added on to protection devices.
They allow information about the status of the protection device to
be monitored from a distance.
Auxiliary contact CA H (function H) reports the OPEN/CLOSED status.
CA S/H or CA S/H G act as either an auxiliary contact (function H)
or a signal contact (function S). The user can set the function at
the time of installation. When used as a signal contact, it reports
information about the automatic tripping of the protection devices.
A test button on the front simulates functions H or S. There are also
a reset button for the contacts (function S) and a tripping signal
(function S).
Approval/Marking
—CE
—cURus
—CEBEC
—KEMA EUR
Series CA
Function Std. Pack Product No. GO-135VB
H1CA H $47.00
S/H 1 CA S/H $59.00
S/H (gold contacts) 1 CA S/H G $59.00
Padlocking Bracket 25 KS $12.00
List Price
Coupling
Busbar pass-through
Stack-on
1/2 mod.
H
S
7-12
Control Catalog
Rev. 4/16
Prices and data subject to
change without notice
Page 2
Miniature Circuit Breakers
E2000 Miniature Circuit Breakers
Series CB Auxiliary Switch and Bell Alarm
Applications
—Commercial
—Industrial
Features
—Common for all MCBs
—Can be coupled on both sides of MCBs
—There are two change-over contacts – the upper one features
changeable function S/H
—CB SH/HH-R couples to the right side of the protection devices;
CB SH/HH-L couple to the left
—No stack-on possibilities (only one auxiliary)
—No busbar pass-through facilities
Performance
Change-over contacts 2 Form C
Rate current In (A) 5
Rated voltage AC Un (V) 240
Electrical endurance 10000
Terminal capacity flexible/rigid cable (mm2) 2.5
Weight (g) 80
Section 7
Functions
The bottom auxiliary contact (function H) reports the OPEN/
CLOSED status.
The top auxiliary contact can act as either an auxiliary contact
(function
H) or a signal contact (function S). The user can set
the function at the time of installation. When used as a signal
contact, it reports information about the automatic tripping of
the protection devices.
A test button on the front simulates functions H or S. There are
also a reset button for the contacts (function S) and a tripping
signal (function S).
Approval/Marking
—cURus
Series CB
Function Coupling Std. Pack Product No. GO-135VB
SH/HH Right 1 CB SH/HH-R $87.00
SH/HH Left 1 CB SH/HH-R $87.00
List Price
Coupling right
Coupling left
1/2 mod.
HS
Rev. 4/16
Prices and data subject to
change without notice
Control Catalog
7-13
Page 3
Miniature Circuit Breakers
E2000 Miniature Circuit Breakers
Shunt Trip and Undervoltage Release
Applications
—Commercial
—Industrial
Features
—Common devices for all miniature circuit breakers
—Can be coupled on both sides of MCBs
—Permits pass-through of busbars, pin and fork, at top or
bottom terminals
—Stack up to four modules on left and right sides
Approval/Marking
—cURus
—IEC 947-2
Shunt Trip Tele L
The Tele L allows remote switching of any miniature circuit
breaker by means of push buttons or any other automatic management processor. A built-in contact, in series with the coil,
prevents burnout damage if the voltage remains.
Section 7
Shunt Trip Tele L Performance
Rated voltage (V) 110/415, 110/125 DC
Tripping time (ms) <10
Electrical endurance 10000
Terminal capacity flexible/rigid cable (mm2) 2.5
Weight (g) 125
(V) 24/60, 24/48 DC
Shunt Trip Tele L
Poles Std. Pack AC DC Product No. GO-135VB
11
Voltage
24-60 V 24-48 V TELE L-1 $90.00
110-415 V 110-125 V TELE L-2 $90.00
List Price
Undervoltage Release Tele U
The Tele U releases the main miniature circuit breaker in case
the power supply drops below 0.5xUn. Time delay is adjustable up
to 300 ms.
Undervoltage Release Tele U Performance
Rated voltage AC UN (V) 240
Rated voltage DC/AC UN (V) 12, 24, 48 DC/AC
Tripping voltage (V) ≤0.5xUN ±10%
Resetting voltage (V) >0.5xUN ±10%
Tripping time (ms) Adjustable 1-300
Electrical endurance 2000
Terminal capacity flexible/rigid cable (mm2) 2.5
Weight (g) 125
Coupling
Busbar pass-through
Stack-on
Undervoltage Release Tele U
Poles Std. Pack Voltage Product No. GO-135VB
AC 230V TELE U-230 $128.00
11
7-14
AC/DC 12V TELE U-12 $128.00
AC/DC 24V TELE U-24 $128.00
AC/DC 48V TELE U-48 $128.00
Control Catalog
List Price
Shunt Trip Tele L Undervoltage Release Tele L
Rev. 4/16
Prices and data subject to
change without notice
Loading...