GE - General Electric CR353 Catalog Page

Definite Purpose Controls

Section 4

Full Voltage Contactors

CR353

Standard
Three Phase
2-pole and 3-pole
50A - 150A

Standard Forms

Standard CR353 contactors in the 50-120FLA ratings are supplied
with box lug terminals. Power poles in the 50-90FLA size are
supplied with two 1/4” quick connect terminals. Contactors in the
120-150FLA size include control power accessory screws on L1
and L2. Coils are provided with screw connections with a single
1/4” quick connect terminal on the 50 and 60 amp size and two
1/4” quick connect terminals on the 75 and 90 amp size.

For configurations not found below see page 4-9 for Factory
Modified Forms.

CR353 Standard (2-pole and 3-pole)

Locked Rotor Amps, Locked Rotor Amps, Locked Rotor Amps, List Price
Inductive Amps Resistive Amps 50/60 Hz @ 240V 50/60 Hz @ 480V 50/60 Hz @ 600V No. of Poles Product Number GO-10DP

50 62 300 250 200 2 CR353FE2B*1 $121.00
50 62 300 250 200 3 CR353FE3B*1 $134.00
60 75 360 300 240 2 CR353FF2B*1 $141.00
60 75 360 300 240 3 CR353FF3B*1 $157.00
75 90 450 375 300 2 CR353EG2B*1 $203.00
75 90 450 375 300 3 CR353EG3B*1 $225.00
90 90 540 450 360 2 CR353EH2B*1 $290.00
90 90 540 450 360 3 CR353EH3B*1 $322.00
120 120 720 600 480 2 CR353GJ2A*1 $423.00
120 120 720 600 480 3 CR353GJ3A*1 $460.00
150 150 900 750 600 2 CR353GK2A*1 $816.00
150 150 900 750 600 3 CR353GK3A*1 $900.00

CR353 Co nt ac tor

(Replace * in product number with appropriate coil digit.)

Coil Selection

CR353F, E, G Coil Selection

AC Coils

CR353F, E Coil Voltage CR353G Coil Voltage

60 Hz 50 Hz 60 Hz 50 Hz Product No. Digit

24 24 — — H
110-120 110-120 115-120 110 A
208-240 208-240 230-240 220 B
277 — 277 — F
460-480 440 460-480 440 C
575-600 550 575-600 550 D

DC Coils List Price Adder

CR353F Coil Voltage CR353E Coil Voltage Product No. Digit GO-10DP

12 12 P $36.00
24-28 24-28 R $36.00
110-125 110-125 S $36.00
— 48 T $36.00

4-8

Control Catalog

Rev. 8/15

Prices and data subject to
change without notice

Definite Purpose Controls

Section 4

Full Voltage Contactors

CR353

Standard
Three Phase
2-pole and 3-pole
Factory Modified Forms
50A-150A

Factory Installed Modifications

CR353 Definite Purpose Contactors, 50A-90A, 2-pole & 3-pole

Select contactor from the main table and complete the product number by inserting the digits corresponding to required and optional
specifications from the tables below. Note: minimum order quantities apply to all factory modified forms. Contact factory for details.

Product Number
Full Resistive Locked Rotor Amps, (Complete by adding digits from tables below1)
Load Amps Three Phase, 50/60 Hz Required Digits Options List Price
Amps Per Pole 240V 480V 600V Poles 1 2 3 4 5 6 7 8 9 10 11 12 13 GO-10DP

50 62 300 250 200 2 C R 3 5 3 F E 2 $121.00
50 62 300 250 200 3 C R 3 5 3 F E 3 $134.00
60 75 360 300 240 2 C R 3 5 3 F F 2 $141.00
60 75 360 300 240 3 C R 3 5 3 F F 3 $157.00
75 90 450 375 300 2 C R 3 5 3 E G 2 $203.00
75 90 450 375 300 3 C R 3 5 3 E G 3 $225.00
90 90 540 450 360 2 C R 3 5 3 E H 2 $290.00
90 90 540 450 360 3 C R 3 5 3 E H 3 $322.00
1

If no options are required, product number is complete after 10 digits.

Digit 9 Line and Load Terminals

List Price Adder

Product No. Digit 9 Terminal Type GO-10DP

A Screw w/Quick Connect $0.00
B Box Lug w/Quick Connect (standard) $0.00
C Screw $0.00
D Lug $0.00

Digit 10 Coil Selection

AC Coils

60 Hz 50 Hz Product No. Digit 10

24 24 H
110-120 110-120 A
208-240 208-240 B
277 — F
460-480 440 C
575-600 550 D

DC Coils Product No. List Price Adder

CR353F Coil Voltage CR353E Coil Voltage Digit 10 GO-10DP

— 12 P $36.00
24-28 24-28 R $36.00
— 115 S $36.00
— 48 T $36.00

Coil Voltage

Factory Installed Modifications

CR353 Definite Purpose Contactors, 120A-150A, 2-pole and 3-pole

Select contactor from the main table and complete the product number by inserting the digits corresponding to required and optional
specifications from the tables below. Note: minimum order quantities apply to all factory modified forms. Contact factory for details.

Product Number

Full Resistive Locked Rotor Amps, (Complete by adding digits from tables below1)
Load Amps Three Phase, 50/60 Hz Required Digits Options List Price
Amps Per Pole 240V 480V 600V Poles 1 2 3 4 5 6 7 8 9 10 11 12 13 GO-10DP

120 120 720 600 480 2 C R 3 5 3 G J 2 A 1 $423.00
120 120 720 600 480 3 C R 3 5 3 G J 3 A 1 $460.00
150 150 900 750 600 2 C R 3 5 3 G K 2 A 1 $816.00
150 150 900 750 600 3 C R 3 5 3 G K 3 A 1 $900.00
1

If no options are required, product number is complete after 11 digits.

Digit 10 Coil Selection

60 Hz 50 Hz Product No. Digit 10

115-120 110 A
230-240 220 B
277 — F
460-480 440 C
575-600 550 D

Coil Voltage

Digit 11 Terminal Markings

List Price Adder

Product No. Digit 11 Terminal Markings GO-10DP

0 No terminal markings2 $1.00
1 Line (L) at top, Load (T) at bottom (Standard) $0.00
2 Load (T) at top, Line (L) at bottom (Inverted) $1.00
2

If this will be the final digit(s) in your selection, omit from product number.

Digit 12 Auxiliary Contacts

List Price Adder
Product No. Digit 12 Auxiliary Contacts GO-10DP

A None (standard)2 $0.00
B 10FLA , 250Vac SPDT on left side $16.00
C 10FLA, 250Vac, SPDT left & right $32.00
D 10FLA, 600Vac, 1NO-1NC on left side3 $36.00
3

Not available on CR353F.

Digit 13 Nameplate Markings

List Price Adder
Product No. Digit 13 Specials GO-10DP

Blank None (standard) $0.00
Request from Factory (Custom)4 $9.00

4

For special nameplate markings, contact factory.

Digit 12 Auxiliary Contacts

List Price Adder

Product No. Digit 12 Auxiliary Contacts GO-10DP

A None2 $0.00
B 10FLA, 600Vac, 1NO on left side $32.00
C 10FLA, 600Vac, 1NC on left side $32.00
D 10FLA, 600Vac, 1NO-1NC on left side $60.00
2

If this will be the final digit in your selection, omit from product number.

Digit 13 Nameplate Marking

List Price Adder
Product No. Digit 13 Specials GO-10DP

Blank None (standard) $0.00
Request from Factory (Custom)4 $9.00
4

For special nameplate markings, contact factory.

Rev. 8/15

Prices and data subject to
change without notice

Control Catalog

4-9