Nonreversing, Combination, NEMA Type 1, 3R, 12, 4/4X
NEMA Sizes 0-6, Nonfusible Disconnect Type
600 Volts Maximum 50/60 Hertz
List Price includes a holding interlock, pressure terminals for the line and load connections, plus a 3-leg block type overload relay
(manual reset). All enclosures include external reset . Three heaters should be ordered as separate items. See pages 1-153 to 1-159 for
selection.
ainted steel Type 4 enclosure is standard for NEMA Size 6 forms.
• NEMA Size 0-6 starters with 115-120 Volt, 60-Hertz coil for separate control are available at listed prices. To order, replace Digits 8 and 9 of listed Product Numbers with 02.
Example: CR408C2051A1AAAAA with 115-120 Volt , 60-Hertz coil for separate control becomes CR408C2021A1AAAAA.
• Motor full load current should not exceed continuous ampere rating of starter.
Nonreversing, Combination, NEMA Type 1, 3R, 12, 4/4X
NEMA Sizes 0-6, Fusible Disconnect Type
600 Volts Maximum 50/60 Hertz
List Price includes a holding interlock, pressure terminals for the line and load connections, plus a 3-leg block type overload relay
(manual reset). Fuses not included. All enclosures include external reset. Three heaters should be ordered as separate items. See
pages 1-153 to 1-159 for selection.
CR308/408
Voltage NEMA MaximumAmpAmpNumberNumberPriceNumberPriceNumberPrice
(60Hz)Size Horsepower RatingRatingCRCRCRCR
• NEMA Size 0-6 starters with 115-120Volt, 60-Hertz coil for separate control are available at listed prices. To order, replace Digits 8 and 9 of listed Product Numbers with 02.
Example: CR408E108HD1AAAAA with 115-120 Volt, 60-Hertz coil for separate control becomes CR408E102HD1AAAAA.
• For ordinary starting duty only
• Motor full load current should not exceed continuous ampere rating of starter.
1-32
Contr
ol Catalog
ev. 8/15
R
and data subject to
Prices
change without notice
Page 3
EMA Full Voltage Power Devices
N
ection 1
S
NEMA Rated Full Voltage Starters - Magnetic
CR308, CR408 Magnetic Starters
Nonreversing, Combination, NEMA Type 1, 3R, 12, 4/4X
NEMA Sizes 0-6, Fusible Disconnect Type
600 Volts Maximum 50/60 Hertz
List Price includes a holding interlock, pressure terminals for the line and load connections, plus a 3-leg block type overload relay
(manual reset). Fuses not included. All enclosures include external reset. Three heaters should be ordered as separate items. See
pages 1-153 to 1-159 for selection.
CR308/408
Voltage NEMA MaximumAmpAmpNumberNumberPriceNumberPriceNumberPrice
(60Hz)Size Horsepower RatingRatingCRCRCRCR
• NEMA Size 0-6 starters with 115-120Volt, 60-Hertz coil for separate control are available at listed prices. To order, replace Digits 8 and 9 of listed Product Numbers with 02.
Example: CR408D604R61AAAAA with 115-120 Volt , 60-Hertz coil for separate control becomes CR408D602R61AAAAA.
• For ordinary starting duty only
• Motor full load current should not exceed continuous ampere rating of starter.
• HP rating is based on dual element fuses.
ev. 8/15
R
and data subject to
Prices
change without notice
Contr
ol Catalog
1-33
Page 4
EMA Full Voltage Power Devices
000123456
4
Indicating Light
1
4a
One (R
ed Only)
2
1
4b
One (Specif
y Red or Green)
(HEAVY-DUTY, CR104P)
Any
4c
Two (Includes 1 NC Auxiliary
Contact)
4
(HE
AVY-DUTY, CR104P)
Any
4d
One Push-To-Test and/or Transformer
Type (Red or Green)
Any
4e
Two Push-To-Test (Includes 1 NC
Auxiliary Contact) and/or
Transformer Type
4
Any
5
Push Buttons
5a
FORW
ARD-STOP-REVERSE
Any
5b
HIGH-LOW-OFF
Any
5c
FAST-SLOW-STOP
Any
5d
HIGH-LOW Push Button and
H-O-A Selector Switch
Any
5e
Single Push Button, Unwired
(Specify Marking)
5
Any
5f
Single Illuminated Push Button,
Unwir
ed (Specify Marking)
5
Any
6
Selector S
witches
6a
LOW-OFF-HIGH
Any
6b
SLOW-OFF-FAST
Any
6c
FORWARD-OFF-REVERSE
Any
6d
LOW-HIGH and HAND-OFF-AUTO
Any
6e
HAND-OFF-AUTO
Any
Single Selector Switch Maintained
(Specify Marking and Positions)
(Specify Two or Three Positions)
5
Any
K
ey Operated Maintained (Specify
Marking and Key-Removal Positions)
(Specify Two or Three Positions)
5
Any
6h
Nonstandar
d Markings
Any
6g
N
ote: For indicating light modifications on CR309-311 & CR390, see p. 1-124.
1
One indicating light: W
ired in parallel with operating coil.
Two indicating lights:
Red is wired in parallel with operating coil,
green is wired through an auxiliary contact.
Pilot
Devices
Mounted In
Cov
er or
Flange of
CR306
CR307
CR308
CR387
CR407
CR408
CR487
Pilot
Devices
Mounted In
Cover or
Flange of
CR309
CR310
CR311
CR390
CR410
CR411
CR490
6f
Starter NEMA Size
Type of
Installation/
Starters
Item
No.Modifications
Enclosure
Type
F
actory-installed field modification kit for sizes 00-4 and size 5 without CPT.
Not available in NEMA Size 00. Use Size 0 starter and modification.
Maximum of three additional auxiliary contacts available on size 0-1.
Specify CR104P operator and contact block by product number.
The general information at the top of page 1-124 regarding factory-installed modifications, also applies to those listed in the table below.
Control Circuit Fusing
Per the NEC and UL508 Section 18.2 - Control Circuit Fuses must be used when the branch circuit
protective device rating is too large to serve as protection for the control circuit. This depends on
the control wire size and whether all control circuit wires are within the enclosure. See table below:
Provide supplemental control circuit protection if control circuits with wires longer
than
12 inches are connected to branch circuit protection exceeding the ratings below
ControlMaximum Branch CircuitMaximum Supplemental
CircuitProtection Rating (Amperes)Control Circuit
Wire SizeConductorsConductorsProtection Rating
(A
WG)within Enclosureoutside Enclosure(Amperes)
221233
202055
182577
16401010
141004520
121206025
ev. 8/15
R
and data subject to
Prices
change without notice
The
factory must provide this protection, if the circuit provided by the factory requires the fuses.
The factory will provide control circuit fuses in enclosed starters and contactors with pilot devices,
control relays or other control components that are factory wired; when used with line voltage
control; when the size listed below is being supplied.
Size 0-3 with Mag-Break Protector
Size 3 with:
—Circuit Breaker greater than 100 amps, or
—Fuse Clips greater than 100 amps, or
Size 4 and above with any circuit breakers, circuit protector or fuse clips.
Control Circuit fuses (Modification 9) must be added to the enclosed starter or contactor pricing.
All CPTs will be supplied with primary fuses. CPTs without primary fuses are no longer available.
When control circuit fuses are not factory supplied, customer provided wiring or branch circuit
protection sizing to these contactors and starters may still require that the customer/installer add
the fusing in the field. It will be the customer/installer’s responsibility to ensure code compliance
under these conditions.
Contr
ol Catalog
1-125
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.