Gefran IC Data Sheet
Dimensions max.
Metric
Limit cursor for
lenghts over 300 mm
External Flange
Version
Internall Flange
Version
2 holes
24AWG PTFE
free wires lenght 200mm
Detail
Limit cursor for
lenghts over
300 mm
Cursor
IC
RECTILINEAR DISPLACEMENT TRANSDUCER FOR
MOUNTING INSIDE HYDRAULIC ACTUATORS
Principal characteristics
• Transducer with exposed tracks, allowing rod diameter is reduced to be reduced to a minimum to permit
installation in small cylinders.
• Thanks to a special constructive technique, the IC
transducer provides high resistance to the working
pressures of oil-pressure cylinders (max 340 bar)
• Available with internal flanges or external threads to
guarantee mechanical compatibility with all principal
cylinder types.
MECHANICAL DIMENSIONS
Important: all the data reported in the catalogue linearity, lifetime,
temperature coefficient are valid for a sensor utilization as a ratio-
metric device with a max current across the cursor Ic ≤ 0.1 mA.
TECHNICAL DATA
Model
100/150/200/300/350/500/550
Resolution
infinite
Repeatibility
0,01mm
Independent linearity (within C.E.U.)
± 0,1%
Life
6
> 25x10
C.E.U.)
Displacement speed
standard < 1,5 m/s
Vibrations
5...2000Hz, Amax =0,75 mm amax. = 20 g
Shock
50 g, 11ms.
Tolerance on resistance
± 20%
Recommended cursor current
< 0,1 µA
Maximum cursor current
10mA
Dissipation at 40°C (0W at 120°C)
3W
Max. applicable voltage
60V
Actual Temperature coefficient of the output voltage
≤ 1,5 ppm/°C
Electrical isolation
>100MΩ a 500V=, 1bar, 2s
Dielectric strength
< 100µA a 500V~, 50Hz, 2s, 1bar
Working temperature
-30...+100°C
Storage temperature
-50...+120°C
Displacement speed
≤ 1.5 m/s
Displacement force
≤ 1 N
Rod material
Anodised aluminium
Flange material
Stainless steel AISI 303
Fixing
Internal or external flange
m strokes, or 100x106 maneuvers, whichever is less (within
MECHANICAL / ELECTRICAL DATA
MODEL
Useful electrical stroke (C.E.U.) ± 1
Theoretical electrical stroke (C.E.T.) ± 1
Resistance (C.E.T.)
Mechanical stroke (C.M.) ± 1
Maximum length (A)
mm
mm
kΩ
mm
mm
100
124,8
150
174,8
200
224,8
300
MODEL + 4
MODEL + 10
10
MODEL + 4
324,8
350
374,8
500
524,8
550
574,8
EXT. FLANGE VERSION / CONNECTOR
VPT02A10-6PT2
Connector
OPTIONAL ACCESSORIES
Code
6 pole Female connector CON300
ELECTRICAL CONNECTIONS
CONNECTOR
OUTPUT
Connection side
INSTALLATION INSTRUCTIONS
• Respect the indicated electrical connections
(DO NOT use the transducer as a variable resistance)
• When calibrating the transducer, be careful to set the
stroke so that the output does not drop below 1% or
rise beyond 99% of the supply voltage.
CABLE
OUTPUT
Blue
Yellow
Brown
ORDER CODE
Displacement transducer IC
3 free wires 200mm
length output
Connector output
(only for ext flange)
MODEL
Internal flange I
version
External flange E
version
Thread
Internal flange ---
External Metric M
flange American I
F
C
M
Cable length
(10 cm)
This part of the code
only applies to
the model with
3 wires output
IC-F
Ex.: IC - F - 300 - E - M
Displacement transducer model IC, 3 free wires 200mm. length output, external flange, metric thread and useful electrical stroke (C.E.U.) 300mm.
GEFRAN spa reserves the right to make any kind of design or functional modification at any moment without prior notice
0 0 0 X 0 0 0 X 00 0
DTS_IC_03-2016_ENG
Loading...