POWER UNITS
Smart power controllers from one to three phases
GTF
CONFIGURABLE POWER CONTROLLERS WITH SERIAL
COMMUNICATION IN MODBUS RTU
Modular monophase power controller with heatsink, 25A / 480VAC (25A at 40°C, voltage range 90 - 530 VAC). Control inputs: digital, programmable analog V, I, Potentiometer.
Firing type configurable for: ZC “zero crossing”, BF “burst firing”, HSC “half single cycle”,
PA “phase angle”.
• Configurable analog control input (0- 10V, 4- 20mA)
• Faceplate protection: IP20
• Overvoltage protection
c
• Overtemperature function alarm
• Current V, I, P limit
• Modbus RTU digital communication
• Integrated fuse
• PID temperature control function
• Nominal working temperature 40°C
(solid state relay HB option)
Synchronism output for
Master/Slave connection
Alarm output
High-performance versions
Control signal input (GND)
Control signal input (+)
Output for potentiometer power supply (+5VDC)
Digital input (PWM input)
Power supply terminals 24Vac/Vdc
UL
HB BUTTON
Green LED (RUN)
Yellow LED (STATUS)
Red LED (HB alarm output)
Yellow LED (Digital input status)
Green LED = Thyristor ON
Yellow = Overtemperature
1/L1
LINE connection
Line voltage reference
J1
Power supply and control
connector
Heatsink fastening screw
Housing for ID plate
Heatsink fastening screw
2/T1
LOAD connection
3/L2
connection
PE
GROUND
| 62
POWER UNITS
GTF 25
GTF 40
Depth 143 mm
GTF50 (without fan)
GTF60 (without fan)
GTF 75(without fan)
GTF 90 (without fan)
GTF 120 (with fan)
c
Depth 170.4 mm
Current
25 A Master - - - GTF-25-480-0-0-0-0 1-B-M F052376 A
25 A Master HB load interrupt alarm - - GTF-25-480-0-1-0-0 1-B-M F053125
25 A Master
25 A Master
40 A Master - - - GTF-40-480-0-0-0-0 1-B-M F050677
40 A Master HB load interrupt alarm - - GTF-40-480-0-1-0-0 1-B-M F050678
40 A Master
40 A Master
50 A Master - - - GTF-50-480-0-0-0-0 1-B-M F052386
50 A Master HB load interrupt alarm - - GTF-50-480-0-1-0-0 1-B-M F055291
50 A Master
50 A Master
Work modes
(configurable via software)
Integrated functions Communication Options included Order code SAP/METEL code
HB load interrupt alarm
Limit I_Pk, I_RMS
Feedback (P,V,I,V2,I2)
HB load interrupt alarm
Limit I_Pk, I_RMS
Feedback (P,V,I,V2,I2)
HB load interrupt alarm
Limit I_Pk, I_RMS
Feedback (P,V,I,V2,I2)
HB load interrupt alarm
Limit I_Pk, I_RMS
Feedback (P,V,I,V2,I2)
HB load interrupt alarm
Limit I_Pk, I_RMS
Feedback (P,V,I,V2,I2)
HB load interrupt alarm
Limit I_Pk, I_RMS
Feedback (P,V,I,V2,I2)
- - GTF-25-480-2-1-0-0 1-B-M F054058
Modbus - GTF-25-480-2-1-0-M 1-B-M F052299
- - GTF-40-480-2-1-0-0 1-B-M F052323
Modbus - GTF-40-480-2-1-0-M 1-B-M F054982
- - GTF-50-480-2-1-0-0 1-B-M F059632
Modbus - GTF-50-480-2-1-0-M 1-B-M F052298
63 |