Gefen VGA-CAT5-148S User Manual
1x8 VGA
CAT-5 DA
USER MANUAL
www.gefen.com
ASKING FOR ASSISTANCE
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday through Friday PST.
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
support@gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hard ware, packaging and any
accompanying doc u men ta tion without prior written notice.
1x8 VGA CAT5 DA is a trademark of Gefen Inc.
© 2007 Gefen Inc., All Rights Reserved
TABLE OF CONTENTS
Operation Notes
1
Introduction
2
Features
3
Sender Panel Descriptions
4
Receiver Panel Descriptions
5
Connecting and Operating the 1x8 VGA CAT5 DA
6
How to Adjust the Picture
7
CAT5 Wiring Diagram
8
Specifi cations
9
10
Warranty
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING
OR OPERATING THE 1X8 VGA CAT5 DA SYSTEM
• Use industry standard Category-5 (CA T-5) cable to operate the 1x8 VGA CA T5 DA system.
CAT-5e cable is preferred.
• Please connect all the cables between the computer and the 1x8 VGA CAT5 DA system
before powering up the 1x8 VGA CAT5 DA Sender unit.
• The 1x8 VGA CAT5 DA units are housed in a metal box for better RF shielding.
1
Loading...