Gefen USB-2X1 User Manual

USB Switcher
USER MANUAL
www.gefen.com
ASKING FOR ASSISTANCE
Technical Support:
Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120
Technical Support Hours:
Write To:
Gefen Inc. c/o Customer Service 20600 Nordhoff St Chatsworth CA 91311
www.gefen.com support@gefen.com
Gefen Inc. reserves the right to make changes in the hard ware, packaging and any
accompanying doc u men ta tion without prior written notice.
USB Switcher is a trademark of Gefen Inc.
© 2007 Gefen Inc., All Rights Reserved
Notice
TABLE OF CONTENTS
Introduction
1
Features
2
Panel Descriptions
3
Connecting and Operating the USB Switcher
4
RMT2-IR Installation
5
Specifi cations
6
Warranty
7
INTRODUCTION
Congratulations on your purchase of the ex•tend•it USB Switcher. Your complete satis­faction is very important to us.
Gefen’s line of KVM (Keyboard Video & Mouse), DVI, ADC, USB, switches, extenders, converters and hubs is designed to make computer use more comfortable, more pro­ductive and less expensive. KVM switches allow access to multiple computers from a single keyboard, while the extenders give the user control over a computer up to 330 feet away from the work area. The ex•tend•it line offers solutions for noise, space and security concerns, data center control, information distribution, conference room presen­tation, and school and corporate training environments.
Our Commitment Gefen will always offer the fi nest quality product at the best possible price. Included in
that price is a lifetime of free support from a team of outstanding engineers. Now you can switch easily and reliably between any combination of two VGA & USB 1.1
equipped computers (PC or Mac) - using only one keyboard, display and mouse. The VGA cross platform switcher saves space - there’s no need to work on a desk crowded with double displays, keyboards and mouse devices. It saves time - there’s no need to move from one monitor to another to access different computers. And, it saves money
- there’s no need to purchase additional displays, mouse devices, keyboards etc.
1
FEATURES
Features
• Saves money on hardware costs
• Saves space on your desktop
• Save time and increase your productivity
• Maintains highest 1920 x 1200 x 60Hz resolution video
• No loss of quality
• Use either PC or Mac with USB keyboard/mouse
• Switches easily between any two VGA computers
• Switch between two VGA, USB 1.1 and Audio Sources
• Rackmountable
Includes:
(1) USB Switcher (1) 12v Power Supply (2) 6ft DVI to VGA cables (1) DVI-A to VGA adapter (2) 6ft USB cables (2) Audio cables (1) User's Manual
2
PANEL DESCRIPTIONS
Power Indicator
Audio In 1 Audio In 2 Audio Out
Indicates which
input is selected
Selector
Contact Closure Interface
- Connects to optional wired RMT-2 remote control
12VAC
DVI In 1
Input
DVI Out
DVI In 2
USB
Output
USB In 1
USB In 2
3
CONNECTING AND OPERATING THE USB SWITCHER
How to Connect the USB Switcher to your devices
1- Connect the supplied cables from your rst computer into the DVI In 1, USB In 1,
and Audio In 1 connection in the back of the USB Switcher. 2- Connect the supplied cables from your fi rst computer into the DVI In 2, USB In 2,
and Audio In 2 connection in the back of the USB Switcher. 3- Connect the monitor to the DVI Out connection. (use the DVI-A to VGA adapter if
necessary)
4- Connect your USB devices (e.g. keyboard, mouse) into the USB Out. 5- Connect your speakers to the Audio Out. 6- Plug the 12VDC power supply into the USB Switcher.
How to Operate the USB Switcher
1- Use the front panel push button to switch between sources. 2- Use the optional RMT-2 wired remote control to remotely toggle between sources.
Operation Notes
When turning on or rebooting your computers, the USB Switcher must be select­ed to the computer that is booting until the computer completes the boot cycle.
4
SPECIFICATIONS
Video Amplifi er Bandwidth ..................................................................................350 MHz
Input Video Signal.......................................................................................... 1.2 volts p-p
Input DDC Signal .................................................................................... 5 volts p-p (TTL)
Single Link Range ............................................................................. 1920 x 1200 x 75hz
DVI Input/Output Connector Type ........................................................................... DVI-A
USB 1.1 Input Connection ................................................................................... Type “B”
USB 1.1 Output Connection ................................................................................ Type “A”
Power Consumption ................................................................................ 18 Watts (max.)
Power Supply ....................................................................................................... 12 VAC
Dimensions ........................................................................................ 4”D x 8”W x 1.75”H
Rackmountable ........................................................................................... 1 Rack Space
Shipping Weight ....................................................................................................... 8 Lbs
6
WARRANTY
Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship.
If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi cations.
Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for ninety (90) days from the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including without limitation, any implied warranty or merchantability or fi tness for any particular purpose, all of which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from Gefen.
3. Copper cables are limited to a 30 day warranty and cable must be free from any scratches, markings, and neatly coiled.
The information in this manual has been carefully checked and is believed to be accurate. However, Gefen Inc. assumes no responsibility for any inaccuracies that may be contained in this manual. In no event will Gefen Inc., be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. The technical information contained herein regarding USB Switcher features and specifi cations is subject to change without notice.
7
Loading...