Gefen TOOLBOX GTB-MHDMI1.3-148, TOOLBOX GTB-MHDMI1.3-148-BLK User Manual

Page 1
www.gefentoolbox.com
1:8 Splitter
for HDMI® 1.3
GTB-MHDMI1.3-148
GTB-MHDMI1.3-148-BLK
Page 2
ASKING FOR ASSISTANCE
Rev B3 9cab
Firmware 1.5L
Technical Support:
Telephone (818) 772-9100 (800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday Pacifi c Time
Write To:
Gefen, LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311
www.gefentoolbox.com support@gefen.com
Notice
Gefen, LLC reserves the right to make changes in the hard ware, packaging and
any accompanying doc u men ta tion without prior written notice.
HDMI®, the HDMI Logo, and High-De nition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing in the United
States and other countries.
GefenToolBox 1:8 Splitter for HDMI 1.3 is a trademark of Gefen, LLC
© 2010 Gefen, LLC, All Rights Reserved
All trademarks are the property of their respective owners.
Page 3
CONTENTS
1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting And Operating The GefenToolBox 1:8 Splitter For HDMI 1.3 7 EDID Management 7 Understanding EDID 8 EDID Mode Selection 9 Audio Channel Selection 10 Internal EDID Specifi cations 11 Wall Mounting Instructions 12 Specifi cations 13 Warranty
Page 4
1
INTRODUCTION
Congratulations on your purchase of the GefenToolBox 1:8 Splitter for HDMI 1.3. Your complete satisfaction is very important to us.
About Gefen
We specialize in total integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line. Please visit http://www.gefen.com for the latest offerings in High-Defi nition signal solutions or call us between the hours of 8:00 am and 5:00 pm Monday-Friday, Pacifi c Standard Time for assistance with your A/V needs. We’ll be happy to assist you.
Why GefenToolBox?
The GefenToolBox line offers portable and effective solutions for common A/V system integration setups using HDMI connectivity. GefenToolBox products are wall-mountable and small in size. GefenToolBox products are easily transported in the fi eld and are ready for immediate and simple deployment in working environments behind the scenes. These products come fi nished in a glossy color to blend in with either a white wall or black cabinet.
The GefenToolBox 1:8 Splitter for HDMI 1.3
The 1:8 Splitter for HDMI 1.3 sends one digital Hi Def A/V source to up to 4 HDTV displays at the same time. It works with any Hi Def source that needs to be connected to an HDTV display, supporting Deep Color with resolutions up to 1080p60 and digital audio formats such as Dolby TrueHD and DTS HD Master Audio.
How It Works
Connect the Hi Def source to the Splitter’s input using the supplied HDMI cable. Connect up to eight (8) HDTV displays to the Splitter’s eight (8) HDMI outputs. Apply power to sources and displays. The source signal will now be seen on all eight (8) displays at the same time.
Page 5
2
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 1:8 SPLITTER FOR HDMI 1.3
EDID contains the A/V capabilities of a display device in regards to video resolutions and audio formats supported. This information is used by the source device to determine the format of the A/V signal it outputs. The GefenToolBox 1:8 Splitter for HDMI 1.3 has advanced EDID management features to ensure complete compatibility with all sources and display devices. Please see pages 7-10 for more details.
The GefenToolBox 1:8 Splitter for HDMI 1.3 detects the presence of Deep Color automatically and disables Deep Color EDID features across all outputs if any connected device or display is not capable of Deep Color. This automatic behavior insures compatibility among all output devices in a mixed-device environment. This feature cannot be disabled.
OPERATION NOTES
Page 6
3
HDMI 1.3 Features
225 MHz (up to 12 bit YUV 444 @ 1080p)
Deep Color (x.v. Color)
Dolby TrueHD & DTS-HD Master Audio
Lip Sync Pass-through
General Features
Simultaneously displays a single Hi Def source on up to 8 HDTV displays without signal loss.
Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p@60, 1920x1200@60 Hz, and 2K.
EDID Management for rapid integration of sources and display devices.
Supports modern advanced digital audio formats including LPCM 7.1 audio, Dolby Digital Plus, Dolby TrueHD, and DTS-HD Master Audio.
Supports the use of DVI sources and DVI displays with an HDMI-to-DVI converter cable or adapter.
Input and output cables up to 15 feet in length can be used when using 8-bit or 12-bit color. Extension distance is dependent upon the quality of the cables being used.
This product is HDMI-compliant and HDCP-compliant.
Package Includes
(1) GefenToolBox 1:8 Splitter for HDMI 1.3 (9) 6-foot Locking HDMI cable (M-M; one for input, eight for outputs) (1) 5V DC Locking Power Supply (1) User Manual
FEATURES
Page 7
4
5
PANEL LAYOUT
4
3
1
2
6
7
Page 8
5
1 HDMI Output Ports 1-8
Connect HDMI-compliant display device(s) to any of these output ports.
2 Audio Channel Selection Switch
This switch will modify the EDID to specify the number of supported audio channels when using the INTERNAL EDID mode. This setting will not af fect the EDID information when using the EXTERNAL EDID mode.
3 EDID Mode Selection Switch
This switch will control the location of the EDID that will be sent to the source device. The options are EXTERNAL and INTERNAL. Please see pages 7-10 for more information.
4 USB Service Port
Used for upgrading the Splitter’s HDMI fi rmware. This feature is currently in development. Future versions of this manual will include a procedure for upgrading the fi rmware.
5 HDMI Input Port
Connect an HDMI source device to this input port. The signal from this port will be replicated to all HDMI output ports. Please see the Features section on page 3 for supported HDMI 1.3 features.
6 5V DC Power Input Receptacle
Connect the included 5V DC power supply between this receptacle and a power source. Only use the power supply supplied with this unit. Screw the locking power tip into the socket on the Splitter until it fi ts snugly .
7 Power Indicator LED
This LED will become active once the included 5V DC power supply has been properly connected to the unit and a power source.
PANEL DESCRIPTIONS
Page 9
6
CONNECTING AND OPERATING
THE 1:8 SPLITTER FOR HDMI 1.3
Wiring Diagram for the 1:8 Splitter for HDMI 1.3
How to Connect the 1:8 Splitter for HDMI 1.3
1. Use an HDMI cable to connect a Hi Def source device to the HDMI input port of the 1:8 Splitter for HDMI 1.3.
2. Use additional HDMI cables to connect up to 8 HDTV displays to the output ports on the 1:8 Switcher for HDMI 1.3.
3. Connect the included 5V DC power supply to the power receptacle on the Splitter.
4. Connect the other end of the power supply to an available power outlet.
How to Operate the 1:8 Splitter for HDMI 1.3
The 1:8 Splitter for HDMI 1.3 does not require any confi guration to begin splitting the incoming HDMI input signal. However, depending on the features required by the user, the EDID Mode and Audio Channel Selection switches may need to be adjusted. Please see the following section for more information on the usage of these switches.
Page 10
Understanding EDID
The 1:8 Splitter for HDMI 1.3 features automatic and manual EDID adjustments to maximize compatibility of all attached devices. First it is necessary to understand EDID and what it is used for.
EDID. What is it and what is it used for?
Under normal circumstances, analog (i.e. VGA computer) and digital (i.e. Blu-ray player) source devices will require information about a connected device/display to assess what resolutions and features are compatible. This required information is read from a standardized fi le called the EDID (Extended Display Information Data). Almost all types of output devices/displays (computer monitor, HDTV, A/V receiver) will carry and transmit its EDID to a connected source. The source will then read this EDID fi le and make the necessary adjustments to ensure that only compatible features are released to the device/display. A source can only accept and read one EDID from a connected device/display. Likewise, the source can only output one resolution and audio type for a connected device/display to use.
Why is EDID so important with the 1:8 Splitter for HDMI 1.3?
The GefenToolBox 1:8 Splitter for HDMI 1.3 is a complex piece of technology that replicates a single input signal to multiple outputs. The single source device will require one EDID to read. Multiple devices/displays can be connected to the outputs on the 1:8 Splitter for HDMI 1.3, each with its own EDID, so management of this information is key to ensure that maximum compatibility is maintained between all devices.
What options do I have to manage the EDID in the 1:8 Splitter for HDMI 1.3?
It is important to understand that the EDID contains much more than just listings of supported resolutions and audio formats. However, resolutions and audio formats are the two key types of information that a user will need to understand how to use these EDID management functions.
Common problems that a user may encounter while using a splitter can be:
1. Video may not be visible on all output devices/displays.
2. Audio may not be heard on all output devices/displays.
These symptoms usually arise from video resolution / audio format incompatibilities between the devices / displays connected to the splitter.
The1:8 Splitter for HDMI 1.3 can use one of two methods to acquire and retransmit an EDID to the A/V source device telling it about the kind of output devices that are connected to the Splitter, thus curing the incompatibility.
EDID MANAGEMENT
7
Page 11
8
EDID MANAGEMENT
EDID Mode Selection
1. EXTERNAL MODE:
To use this mode, set the EDID Mode Switch on the front panel to the EXT position. In External EDID mode, the Splitter directly retrieves EDID data from each connected A/V display device and builds a new EDID created from the highest common video resolution that all display devices can use together and the highest audio capability. This new EDID is sent back to the source device.
If suffi cient EDID data is unavailable from external display devices or EDID- related problems are encountered, Internal EDID Mode should be used to provide a single compatible EDID for all connected devices.
2. INTERNAL MODE: To use this mode, set the EDID Mode Switch on the front panel to the INT
position. This mode will use a preset EDID that is stored in the 1:8 Splitter for HDMI 1.3 from the factory. This pre-programmed standard EDID data structure is compatible with most A/V display devices. All resolutions and audio formats specifi ed in this EDID will be passed to the source device. For a complete listing of the resolutions and audio formats listed in this EDID please see page 10.
NOTE: HDMI capable devices/displays connected to the output ports MUST be compatible with at least one resolution/audio format specifi ed in this EDID. It is recommended to set, on the source device, a common resolution and audio format shared by all attached devices/displays. This is to ensure a compatible signal is output to all connected devices/displays.
Page 12
9
EDID MANAGEMENT
Audio Channel Selection
The 1:8 Splitter for HDMI 1.3 features a switch that will modify the supported audio formats listed in the pre-programmed EDID. This feature is useful for limiting the output of the source device to either 2 or multi-channel audio formats.
NOTE: This selector switch will only affect the pre-programmed EDID in the INTERNAL (INT) EDID Mode.
The 1:8 Splitter for HDMI 1.3 can use either of the following settings for audio format support:
1. 2 Channel: This setting will limit the audio formats listed in the pre­programmed EDID to 2 channel LPCM. For a full listing of the audio formats in this mode please see page 10.
To use this mode, set the Audio Selection Switch on the front panel to the 2 CH position.
This mode is useful in scenarios where all output devices/displays are HDTV monitors that only support 2 channel LPCM. This setting will ensure that all connected devices will receive and produce sound.
2. Multi-Channel: This setting will enable all common audio formats in the pre­programmed EDID. For a full listing of the audio formats in this mode please see page 10.
To use this mode, set the Audio Selection Switch on the front panel to the Multi CH position.
This mode is useful in scenarios where the output devices/displays are varying devices (e.g. HDTV display and audio receivers). Please note that sound may not be heard from all output devices/displays if a shared common audio format is not used by the source device.
Page 13
10
INTERNAL EDID SPECIFICATIONS
Video Data Block
Audio Data Block xvYCC
1080p@60Hz 1080p@50Hz 1080i@60Hz (native) 1080i@50Hz
2-channel:
LPCM 2CH
Multi-channel:
LPCM 2CH LPCM 8CH AC-3 6CH DTS 7CH Dolby Digital+ 8CH Dolby TrueHD 8CH DTS-HD 8CH MAT(MLP) 8CH
xvYCC 709
xvYCC 601
Below are the settings programmed into the
built-in Internal EDID data structure:
Page 14
11
WALL MOUNTING INSTRUCTIONS
The GefenToolBox 1:8 Splitter for HDMI 1.3 should be mounted vertically in a wall or cabinet with wood/drywall screws as shown in the diagram above. There should be an inch or two of clearance between the edges of the unit and any walls or vertical surfaces to allow for enough clearance for insertion and retraction of cables at the HDMI connectors.
For installation on a drywall surface, use a #6 drywall screw. It is recommended when installing on a drywall surface that studs be used to secure the Splitter should undue stress be applied when connecting and disconnecting HDMI cables.
Page 15
12
SPECIFICATIONS
Single Link Bandwidth ............................................................................. 225 MHz
Pixel Clock / Speed .................................................................................. 165 MHz
Maximum Video Resolution ............................. 1080p@60Hz, 1920x1200@60Hz
with 12-bit Deep Color
Input Video Signal .............................................................................. 1.2 volts p-p
Input DDC Signal ......................................................................... 5 volts p-p (TTL)
HDMI Connectors................................... type A 19 pin female; (1) input, (8) output
LED Indicator: (Power)................................................................................ (1) Red
EDID Mode Switches (2)...................................... Audio Channels, INT/EXT Mode
Power Supply .............................................................................................. 5V DC
Power Consumption ............................................................................. 10W (max)
Dimensions ............................................................................. 3”W x 10½”H x ¾”D
Operating Temperature .............................................................................0 - 40 °C
Compliancy.............................US/EU Standards, HDMI 1.3, HDMI 1.2, HDCP 1.1,
DVI 1.0
Certifi cations.............................................................UL (power supply), RoHS, CE
Shipping Weight ............................................................................................ 3 lbs.
Loading...