Gefen HDTV-444 User Manual

ASKING FOR ASSISTANCE

Technical Support:

Telephone [phone]
[phone]

Fax [phone]

Internet [e-mail] / www.gefen.com

Technical Support Hours:

9:00 AM to 5:00 PM Monday through Friday.

Write To:

Gefen Inc.
c/o Customer Service
20600 Nordhoff Street
Chatsworth CA 91311

Gefen Inc. reserves the right to make changes in the hard ware, packaging and any

accompanying doc u men ta tion without prior written notice.

The 4x4 DVI Matrix is a trademark of Gefen Inc.

© 2004 Gefen Inc., All Rights Reserved

Notice

1

Introduction

2

Operation Notes

3

Back Panel Layout

4

Back Panel Descriptions

5

Wiring Diagram

6

Warranty

TABLE OF CONTENTS

INTRODUCTION

Thank you for purchasing the 4x4 DVI Matrix The 4x4 DVI Matrix switches four computers
(PC or MAC) to any four DVI digital displays with USB keyboard and mouse.

The 4x4 DVI Matrix switcher has four DVI inputs and four DVI outputs. Matrix input#1 and
the graphics port of Computer #1 connects using a male to male DVI cable. Computer #2
connects to DVI input#2. Computer #3 connects to DVI input#3. Computer #4 connects to
DVI input#4. There are four (4) DVI outputs connecting to four (4) different displays. The
USB plugs into USB input 1-4 and typically follows the DVI switched input.

Note: The switching is done by using either the RMT-4 wired remote control or the RMT­16-IR remote control. The 4x4 DVI Matrix is rack mountable. Any Apple fl at panel display
can be connected when used with the ex•tend•it DVI to ADC Conversion Box.

CONTENTS

The 4x4 DVI Matrix consists of:

(4) DVI 6ft Male to Male Cables
(4) USB 6ft A-B Cables
(1) 24VDC Power Supply
(1) User Manual
(1) RMT-16IR

1