Page 1
HD-SDI 1x4
Splitter
USER MANUAL
www.gefen.com
Page 2
ASKING FOR ASSISTANCE
Technical Support:
Telephone (818)772-9100
(800) 545-6900
Fax (818)772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday PST.
Write To:
Gefen Inc.
C/O Customer Service
20600 Nordhoff Street
Chatsworth CA 91311
support@gefen.com -- www.gefen.com
Gefen Inc. reserves the right to make changes in the hard ware, packaging and any
accompanying doc u men ta tion without prior written notice.
1x4 HD-SDI Splitter is a trademark of Gefen Inc.
© 2007 Gefen Inc., All Rights Reserved
Notice
Page 3
TABLE OF CONTENTS
Introduction
1
Features
2
Panel Desciptions
3
Connecting and Operating the 1x4 HD-SDI Splitter
4
Specifi cations
5
Warranty
6
Page 4
INTRODUCTION
Congratulations on your purchase of the ex•tend•it 1x4 HD-SDI Splitter. Your complete
satisfaction is very important to us.
Splits one HD-SDI Source Signal Four Times
1 SDI Input = 4 SDI Outputs for Real-Time Multi-Viewing
The 1:4 HD-SDI Distribution Amplifi er is a reliable video splitting device that allows a
single SDI video source to send data to four HD-SDI displays at the same time. Crisp,
highly defi ninition visuals are generated for each distributed output, and multiple formats
(NTSC, PAL).
SDI
SDI (serial digital interface), used primarily in broadcasting, converts and transmits digital video through SDI connectors. It processes high quality standard or high defi nition
video.
How it works
You simply connect your source to the 1:4 HD SDI Splitter’s HD SDI input, then connect
your four displays to the Splitter’s HD SDI outputs. Once the source, the displays and
the Splitter are powered and connected, your source’s video appears on all four displays simultaneously.
1
Page 5
FEATURES
Features
• Easily distribute one HD-SDI source to four HD-SDI displays
• Streamlines equipment as unnecessary hardware is eliminated
• Distrubutes video instantaneously
Includes:
(1) 1:4 HD-SDI Distribution Amplifi er
(1) 5v Power Supply
(1) Users Manual
2
Page 6
PANEL DESCRIPTIONS
Active Video
Indicator
Power LED
Indicator
SDI Inputs
SDI Outputs
3
Connects to
5V Power
Supply
Page 7
CONNECTING AND OEPRATING THE 1x4 HD-SDI SPLITTER
How to Connect the 1x4 HD-SDI Splitter to your devices
1 Connect your HD-SDI input into Input 1 on the 1x4 HD-SDI Splitter.
2 Connect your displays into outputs 1 thru 4.
3 Connect the 5VDC power supply into the 1x4 HD-SDI Splitter.
4
Page 8
SPECIFICATIONS
Input/Output...................................................................SDI - SMPTE 259M-C (270Mbps)
Input/Output.................................
Supports NTSC & PAL formats
720p @ 60, 59.94, 50Hz
1080p @ 30, 29.97, 25, 24 & 23.98Hz
1080i @ 60, 59.94, 50, 48 & 47.95Hz
Power Supply...........................................................................................................5V DC
Power Consumption....................................................................................10 watts (max)
Dimensions................................................................................7.5”W x 1.25”H x 4.125”D
Shipping Weight.........................................................................................................4 lbs.
........HD-SDI -SMPTE 292M (1.485, 1.485/1.001 Gbps)
5
Page 9
WARRANTY
Gefen Inc. warrants the equipment it manufactures to be free from defects in material
and workmanship.
If equipment fails because of such defects and Gefen Inc. is notifi ed within two
(2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace
the equipment, provided that the equipment has not been subjected to mechanical,
electrical, or other abuse or modifi cations.
Equipment that fails under conditions other than those covered will be repaired at the
current price of parts and labor in effect at the time of repair. Such repairs are warranted
for ninety (90) days from the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or fi tness for any particular purpose,
all of which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from Gefen.
3. Copper cables are limited to a 30 day warranty and cable must be free from any
scratches, markings, and neatly coiled.
The information in this manual has been carefully checked and is believed to be
accurate. However, Gefen Inc. assumes no responsibility for any inaccuracies that may
be contained in this manual. In no event will Gefen Inc., be liable for direct, indirect,
special, incidental, or consequential damages resulting from any defect or omission
in this manual, even if advised of the possibility of such damages. The technical
information contained herein regarding 1x4 HD-SDI Splitter features and specifi cations
is subject to change without notice.
6
Loading...