Gefen HDMI-CAT5-148 User Manual

www.gefen.com

1:8 CAT5

Distribution

Amplifier

EXT-HDMI-CAT5-148

User Manual

Technical Support:
Telephone [phone]
[phone]

Fax [phone]

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday.

Write To:

Gefen Inc.
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311

www.gefen.com
[e-mail]

Notice

Gefen Inc. reserves the right to make changes in the hard ware, packaging and

any accompanying doc u men ta tion without prior written notice.

1:8 HDMI CAT5 Distribution Amplifi er is a trademark of Gefen Inc.

© 2008 Gefen Inc., All Rights Reserved

All trademarks are the property of their respective companies

ASKING FOR ASSISTANCE

CONTENTS

1 Introduction
2 Operation Notes
3 Features
4 Sender Panel Descriptions
5 Receiver Panel Descriptions
6 Connecting And Operating The 1:8 HDMI CAT5 DA
7 Manual Equalization Procedure
8 Network Cable Wiring Diagram
9 Specifi cations
10 Warranty

1

Congratulations on your purchase of the 1:8 HDMI CAT5 Distribution Amplifi er
DA. Your complete satisfaction is very important to us.

Gefen

Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.

The Gefen 1:8 HDMI CAT5 DA

The Gefen 1:8 HDMI Over CAT5 Distribution Amplifi er allows you to distribute a
single HDMI video source remotely to as many as 8 separate HDTV displays via
inexpensive and standard CAT5 cables as well as HDMI cables.

How It Works

Simply plug your master video source into the Gefen 1:8 HDMI Over CAT5 DA
sender unit, then run your cables to the remote locations.

If you are using CAT5 cables, pair up your cables with separately purchased
HDMI CAT5 DAR receivers at each video display.

If you are using HDMI cables, just attach up to 8 HDMI cables on the outputs and
connect the other ends to the displays.

After connection of cables, power up (or re-start) all equipment and you will have
effortless HDMI video duplication at all locations.

INTRODUCTION