Connecting and Operating the HD Digital Audio Splitter
4
RMT2-IR Installation
5
Specifi cations
6
Warranty
7
Page 3
INTRODUCTION
Congratulations on your purchase of the ex•tend•it HD Digital Audio Splitter. Your complete satisfaction is very important to us.
Gefen’s line of HDTV switches, extenders, and splitters are designed to make your A/V
equipment use more comfortable, more productive and less expensive.
Gefen’s ex•tend•it HD Digital Audio Splitter is a distribution hub that sends the same
video output to two or more HDTV digital screens. It is a fl exible solution that accom-
modates multiple displays. When two or more HD splitters are connected together, they
can be used to create a larger distribution.
The HD Digital Audio Splitter is connected using a HDMI cable from the HDMI source to
the HDMI splitter input. There are two DVI outputs. Output 1 is the primary connection
and is used for the main display. Output 2 follows the main display.
The HD Digital Audio Splitter is HDCP compliant.
The ex•tend•it line offers solutions for noise, space and security concerns, data center
control, information distribution, conference room presentation, school and corporate
training environments.
Our Commitment
Gefen will always offer the fi nest quality product at the best possible price. Included in
that price is a lifetime of support from a team of outstanding engineers.
1
Page 4
FEATURES
Features
• Splits the HDTV HDMI signal to two or more HDTV displays
• Maintains 480i, 480p, 720p, 720i, and 1080i, 1080p resolutions
• Connects two or more HDTV displays at the same time to the same video source
• Uses HDMI cables to connect to the input and splitter output
• Maintains highest DVI single link video resolution
• Supports DDWG standard for DVI compliant monitors
• Supports HDCP compliant devices
• Supports DDWG standard for HDMI compliant monitors
• Installs in seconds
Includes:
6’ HDMI cable (m-m)
6' TosLink cable
5VDC Power Supply
The HD Digital Audio Splitter
2
Page 5
PANEL DESCRIPTIONS
SPDIF Out
SPDIF In
Optical Out
Optical In
HD In
DVI Out 1DVI Out 2
3
5v Power
Input
SPDIF Out Optical Out
Page 6
Connecting and Operating the HD Digital Audio Splitter
How to Connect the HD Digital Audio Splitter to your devices
1- Connect the supplied HDMI cable from the HDMI device into the HD Digital Audio
Splitter Input.
2- Connect the cable from your fi rst display (monitor or projector) into the DVI Out 1 slot
on the back of the HD Digital Audio Splitter
3- Connect the cable from your second display (monitor or projector) into the DVI Out 2
slot on the back of the HD Digital Audio Splitter.
4- Connect the included TosLink cable or a SPDIF cable from your source into the HD
Digital Audio Splitter SPDIF in or OPT in.
5- Connect a digital audio cable from your Digital Audio receivers into the SPDIF or
OPT out on the HD Digital Audio Splitter.
5- Plug the 5v power supply into the HD Digital Audio Splitter.
6- Plug the 5v wallmount power supply into the wall outlet.
NOTE: The HD Digital Audio Splitter only passes digital video, and does not support
digital audio in HDMI.
Connecting either a SPDIF or TosLink into the Digital Audio input will convert and distribute to both the SPDIF and TosLink outputs on each distribution.
4
Page 7
SPECIFICATIONS
Video Amplifi er Bandwidth ................................................................................. 1.65 GHz
Input Video Signal ......................................................................................... 1.2 volts p-p
Input DDC Signal .................................................................................... 5 volts p-p (TTL)
Maximum Single Link Range ............................................................ 1920 x 1200, 1080p
Input Connector Type .............................................................................................. HDMI
Output Connector Type ........................................................................................... DVI-D
Gefen Inc. warrants the equipment it manufactures to be free from defects in material
and workmanship.
If equipment fails because of such defects and Gefen Inc. is notifi ed within one
(1) year from the date of shipment, Gefen Inc. will, at its option, repair or replace
the equipment, provided that the equipment has not been subjected to mechanical,
electrical, or other abuse or modifi cations.
Equipment that fails under conditions other than those covered will be repaired at the
current price of parts and labor in effect at the of repair. Such repairs are warranted for
ninety (90) days from the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or fi tness for any particular purpose,
all of which are expressly disclaimed.
The information in this manual has been carefully checked and is believed to be
accurate. However, Gefen Inc. assumes no responsibility for any inaccuracies that
may be contained in this manual. In no event will Gefen Inc., be liable for direct,
indirect, special, incidental, or consequential damages resulting from any defect
or omission in this manual, even if advised of the possibility of such damages. The
technical information contained herein regarding HD Digital Audio Splitter features and
specifi cations is subject to change without notice.
7
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.