Gefen GTV-HDMI2-COMPSVIDSN Data Sheet

HDMI to Composite/S-Video Scaler

P

GTV-HDMI-2-COMPSVIDSN

Converts HDMI source to Composite and S-Video with
scaling

Convert any Hi-Def source to standard definition NTSC/PAL format
with scaling. The HDMI to analog video scaler supports resolutions
up to 1080p Full HD video and scaled outputs in Composite and
S-Video, while maintaining the original aspect ratio for optimal
viewing. The coax S/PDIF digital audio and left/right analog audio
outputs allow the audio extracted from the HDMI signal to be sent
to any AV Receiver or audio amplifier. Underscan/Overscan and
NTSC/PAL switches help assure compatibility with a variety of
analog televisions. This scaler also features a USB port for firmware
upgrades.

How It Works

Using the included HDMI cable, connect the Hi-Def source to the
HDMI input. Use a composite or S-video cable to connect the scaler
to the analog monitor. Connect the scaler to an A/V Receiver or
amplifier using an S/PDIF cable or an analog audio stereo patch
cord with RCA connectors. Connect the power supply to the scaler
and to an available electrical outlet. Power on all connected
components. Use the NTSC/PAL switch on the scaler to select the
correct output format for your TV. Select Underscan or Overscan
using the slide switch on the scaler to compensate for scanning
characteristics of your analog TV that could result in over-cropping
of the image or visible black borders.

Note: This device is not HDCP Compliant.

Features*

• Supported input resolutions:

• 480i@60Hz

• 576i@50Hz

• 480p@60Hz

• 576p@50Hz

• 720p@50/60Hz

• 1080i@50/60Hz

• 1080p@50/60Hz

• 640x480@60Hz

• 800x600@60Hz

• 1024x768@60Hz

• 1280x1024@60Hz

• 1600x1200@60Hz

• Converts and scales HDMI to Composite/S-Video at 480i/60
or 576i/50

• De-embeds audio from HDMI and outputs it as digital and

analog audio

• Accepts HDMI video at resolutions up to 1080p Full HD

• Supports both NTSC and PAL formats

• Underscan/Overscan Switch helps optimize image size on old

analog TV screens without over-cropping or visible black borders

• Field upgradable firmware via USB port

Specifications*

• Maximum Pixel Clock: 225 MHz

• Video Input Connector: (1) HDMI Type A, 19-pin, female, locking

• Video Output Connectors: (1) Composite, RCA-type, female
(1) S-Video, female

• Audio Output Connectors: (1) L/R analog audio (2 x RCA-type, female)
(1) S/PDIF (Coax), RCA-type, female

• USB Connector: (1) Type B (firmware upgrade only)

• Underscan/Overscan Switch: (1) slide-type

• NTSC/PAL Switch: (1) slide-type

• Power Indicator: (1) LED, blue

• Power Supply: (1) 5V DC

• Power Consumption: 7.5 Watts (maximum)

• Horizontal Frequency Range: 31-70 KHz

• Vertical Frequency Range: 50-60 KHz

• Dimensions (W x H x D): 4.1" x 1.2" x 7.1"

(104mm x 30mm x 180mm)

• Shipping Weight: 2.5 lbs. (1.1kg)

®

1080

20600 Nordhoff Street, Chatsworth CA 91311

Gefen, LLC

Tel. [phone] [phone] Fax [phone]

www.gefentv.com

* Features and specifications are subject to change without notice.

All trademarks and registered trademarks are the property of their respective owners.

REV. A1