Gefen EXT-UHD-LANS-RX Datasheet

GEFEN GEN 2.0 AV OVER IP

EXT-UHD-LANS-TX
EXT-UHD-LANS-RX

EXTEND AND DISTRIBUTE 4K
HDMI W/ HDR, RS-232, IR,
AND AUDIO OVER A LOCAL
AREA NETWORK

Gefen’s AV over IP solutions continue their
tradition of providing high performance,
scalable, expandable, and secure AV routing
and distribution over a standard Gigabit Local
Area Network. The Gen 2.0 K VM products
offer enhanced performance, features, and
functionality such as 4K Ultra HD with HDR
support, built-in scalers, video-wall control,
independent RS-232, IR, and audio routing**,
and backward-compatibility with our first
generation products.
The EXT-UHD-L ANS-TX & RX feature maximum
input resolution of 4K 60 Hz 4:2:0, and maximum
output resolution of 4K 30 Hz 4:4:4. HDCP 2.2
and 1.4 are also supported. 7.1 channels of HBR
(High Bit Rate) lossless and LPCM digital audio
can pass through the system as well.
Video, RS-232 2-way IR, and audio can be
routed independently** between any Sender
and Receiver unit, allowing end-users to control
any of the sources and the displays within their
network. With this greatly expanded array of
new cutting-edge features and performance,
the new Gefen AV over IP products fully address
the ever-growing needs of systems integrators.
The Receiver features a built-in scaler to help
optimize the image for a variety of displays
and different viewing environments. It also
includes a powerful video wall controller that
accommodates any screen configuration up to

16x16 and provides great flexibility in sizing
and manipulating live and signage content in
demanding installations. Digital and analog
audio break-out de-embeds audio from the
video and sends it to a separate audio system,
enhancing the impact of presentations.
Power-over-Ethernet allows the Sender and
Receiver units to be powered through a standard
PoE-enabled IP network switch, without the
need for external power supplies. When used
in conjunction with the EXT-CU-LAN Matrix
Controller, system configuration is automated
and quick. Its MFU (Mass-Firmware-Update)
feature keeps the entire system up-to-date
without the need to access and upgrade each
unit separately. Enhanced network security
by separating the control and AV networks
is also made possible with the E XT-CU-LAN.
Other control options include front panel
buttons, web server interface, Telnet, UDP,
and the Gefen Keyboard Switching Controller
software (available for download at www.
gefen.com). Gefen’s Enhanced API provides
added functionality and facilitates use with third
party controllers. The Gefen Gen 2.0 AV over
IP products have been specifically designed
for use with the Gefen Syner-G™ software,
available for download at www.gefen.com.
The Gefen Syner-G™ Discovery and Show-Me
features greatly simplify initial IP configuration.

Each cable run from a Sender to a Receiver
or from a Sender or Receiver to the network
switch can be up to 100 meters (330 feet). A
built-in 2-port Gigabit switch on the Receiver
allows daisy-chaining of additional Receivers or
other IP-enabled devices. In applications such
as digital signage, where there is a need to
replicate content on multiple displays, the ability
to cascade Receivers removes the requirement
for each cable to be run directly to the main
network switch, thereby extending the range of
these units far beyond the limits of a point-to­point video distribution system. The Sender and
Receiver can be used as extenders in a one­to-one system, or as nodes in a virtual matrix
environment where any source can be routed
to any or all displays, supporting up to 39,900
Senders and a combination of over 65,000
units. Applications include high performance
AV and signage systems in sports bars,
clubs, restaurants, board and huddle rooms,
command and control centers, museums,
airports, classrooms, auditoriums, hotels, and
retail establishments. The low-profile Sender
and Receiver units feature a half-rack-width
enclosure, perfect for rack-mounting using the
Gefen EX T-RACK-1U-GRY rack tray (available
separately). They can also be surface-mounted,
placed on a shelf, or tucked away in the
equipment closet or behind a display.

** Pend ing featur es to be activated via an up coming firm ware updat e

FEATURES

*

§ Extends HDMI, RS-232, analog audio, and IR, using a Gigabit

Local Area Network

§ Independent video, RS-232, IR, and audio routing**

§ Backward-compatible with first generation Gefen AV over IP

products

§ Supports input resolutions up to 4K 60Hz 4:2:0

§ Supports output resolutions up to 4K 30Hz 4:4:4

§ Supported HDMI Features:

§ HDR

§ HDCP 2. 2 and 1.4

§ Deep Color

§ Lip-Sync

§ Uncompressed LPCM digital audio up to 7.1 channels

§ Up to 7.1 channels of HBR (High Bit Rate) digital audio

including Dolby Atmos®, Dolby® TrueHD, DTS:X™, and
DTS-HD Master Audio™

§ When used with Gefen DVI-to-HDMI cables (not included),

supports the use of DVI sources and DVI displays up to 1080 p
Full HD and 1920x1200 (WUXG A)

§ Integrated scaler ensures maximum compatibility and best

possible viewing experience with different contents and
displays

§ Built-in video wall controller accommodates any number of

rows and columns up to 16x16

§ Built-in Audio De-Embedder on Receiver breaks out 2 channel

analog, 2 channel PCM, and up to 5.1 channels of Bitstream
audio from the HDMI signal, allowing the audio content to be
sent to external amplifiers and music distribution systems for
added impact

§ MFU (Mass-Firmware-Update), quick and automated

configuration, and enhanced control capabilities and system
securit y when used with the Gefen EXT-CU-L AN Matrix
Controller

§ Enhanced A PI for added functionality with third-party

control systems

§ Built-in web interface, Telnet, and UDP

§ Compatible with the Gefen Keyboard Switching Controller

soft ware, available for download at www.gefen.com

§ Supports 39,900 Senders and a combination of over 65,000

Sender and Receiver units, depending on the network
bandwidth and number of ports on your network switch

§ 802.3af standard Power-over-Ethernet allows the Sender and

Receiver units to be powered through a standard PoE-enabled
IP network switch, without the need for external power
supplies

§ Two-port Gigabit Ethernet switch built into the Receiver unit

§ Mode switch on Sender for sharpness or motion- optimization

of image

§ Field-updatable firmware via EXT-CU-LA N controller or the

built-in web server interface

§ Locking power supply connectors

§ Low-profile, half-rack width Sender and Receiver enclosures

are rack-mountable using E XT-R ACK-1U-GRY

§ Sender and Receiver can also be surface-mounted using the

included L-brackets

§ Low profile Receiver enclosure features an IR Extender port

and can be hidden away behind the display

SPECIFICATIONS

*

§ Video Input connector (S ender): (1) HDMI Type A 19-pin, female,

locking

§ Video Output connector (Receiver): (1) HDMI Type A 19-pin,

female, locking

§ Line Input (Sender): (1) 3.5mm mini-stereo jack

§ Line Output ( Receiver): (1) 3.5mm mini-s tereo jack

§ Optical Digit al Audio Ou tput (Re ceiver): (1) TO SLIN K®

§ RS -232 por t (Sender/ Receiver): (1) 3.5mm stereo jack, female,

DB-9 adaptors included

§ IR In/Ext (Sender/Receiver): (1) 3.5mm mini-stereo jack

§ IR Out (Sender/Receiver): (1) 3.5mm mini-mono jack

§ IR E xtender type: E XT-RM T-EXTIRN

§ Ethernet por t (Sender): (1) RJ-45, shielded, PoE

§ Ethernet por ts (Receiver): (2) RJ-45, shielded, one with PoE

§ Channel Up but ton (Receiver): (1) tact-type

§ Channel Down button (Receiver): (1) tact-type

§ Mode button (Sender): (1) tact-type, recessed

§ Reset but ton (Sender/Receiver): (1) tact-type, recessed

§ Program button (Sender/Receiver): (1) tact-type, recessed

§ Program Select switch (Sender/R eceiver): (1) slide-type, recessed

§ Link Indicator (Sender/Receiver): (1) LED, green

§ Power Indicator (Sender/Receiver): (1) LED, blue

§ Power Supply jack ( Sender/Receiver): 5V DC, 2.5mm pin and

5.5mm barrel, locking

§ Power Requirement (Sender/ Receiver ): 5V DC, or P oE (802.3af

standard)

§ Power Consumption (maximum): Sender: 6.1W, Receiver: 6.8W

§ Operating Temperature (Sender/Receiver) +32 to +122°F (0 to

+50°C)

§ Operating Humidity (Sender/Receiver) 5% to 9 0% RH,

non-condensing

§ Storage Temperat ure (Sender/Receiver) -4 to +185°F (-20 to

+85°C)

§ Storage Humidity (Sender/Receiver) 0% to 95% RH,

non-condensing

§ MTBF: Sender: 50000 hour s / Receiver: 5000 0 hours

§ Dimensions (W x H x D, without connector s or feet):

§ Sender: 8.4” x 1.0” x 4.9” (214mm x 25mm x 123mm)

§ Receiver: 8.4” x 1.0” x 4.9” (214mm x 25mm x 123mm)

§ Unit Weight: Sender: 1.6 lbs. (0.72 kg), Receiver: 1.6 lbs. (0.72 kg)

§ Shipping Weight:

Sender: 3 .8 lbs. (1.7 kg), Receiver: 3.8 lbs. (1.7 kg)

Automation

Control Device

To

PoE

IP Switch

LAN (PoE) RS-232 IR In/Ext IR Out HDMI In Line In

5V DC

Display

4K Source with HDMI output

EXT-UHD-LANS-TX

EXT-UHD-LANS
Sender

Analog Audio Source

with L/R output

EXT-UHD-LANS-RX

Powered Speakers
or Audio Amplifier
w/analog L/R input

5V DCLAN 2 (PoE)LAN 1Opt OutIR OutIR In/ExtRS-232HDMI OutLine Out

EXT-UHD-LANS
Receiver

RS-232

Controlled Device

Audio Amplifier

w/ optical digital input

CAT-5e CABLE

HDMI CABLE

RS-232 CABLE

3.5MM AUDIO CABLE

DIGITAL AUDIO (TOSLINK)

To

PoE

IP Switch

EXT-UHD-LANS

* Featur es and speci ficatio ns are subjec t to change without no tice. ** P ending feat ures to be activated via an upcoming f irmware upd ate.

1800 S McD owell Blvd. P etaluma C A 9495 4 - 800.472.555 5
All trad emarks and r egistered trademar ks are properties o f their resp ective owners
©2018 Nor tek Security & C ontrol. A ll rights r eserved . Gefen® is a regist ered trademark of Nor tek Security & C ontrol. E XT-UHD-L ANS - Rev A- FE B 2018