Gefen EXT-RS232 Data Sheet

Extend Hi-Res DVI up to 5,000 Feet

Over Fiber Optic Cables

EXT-RS232

Extend your RS-232 device up to 1000 feet away from
your computer

Now you can extend your RS-232 peripherals to a remote location
1000 feet (300 meters) away. Control your favorite Gefen
products that use RS-232 or any other serial control devices that
use RS-232. All 9-pins are perfectly reproduced from one end to
the other.

How it works

The RS232 Extender sender unit connects to your computer using
the supplied cable. The extended RS-232 device connects to the
receiver unit. CAT-5 cables connect the send and receive units - up
to 1000 feet away. The sender is powered by a 5 volt power
supply, which will also power the receiver via the CAT-5 cable.

Features:

• Extends any RS-232 compliant device up to 1000 feet
(300 meters) from the computer

• Supports the full 9-pin RS-232 standard with a maximum
data transfer rate of 115,200 baud

• Perfect for digital signage applications

• Only one CAT-5e cable required for extension

• Power only required on Sender units

Specifications:

• RS-232 Input Connector: DB-9 female

• RS-232 Output Connector: DB-9 male

• Link Connector: RJ-45 Shielded

• Conforms to the full 9-pin RS-232 standard

• Maximum data transfer rate: 115,200 baud

• Operating temperature range: +5 to +45 deg. Celsius

• Operating humidity range: 5 to 65% RHL, non-condensing

• Storage temperature range: -20 to +70 deg. Celsius

• Storage humidity range: 5 to 95% RHL, non-condensing

• Power Supply: 5V DC

• Power Consumption: 5W (max)

• Dimensions: 3.8" W x 1.2" H x 1.4" D

• Shipping Weight: 2 lbs

20600 Nordhoff Street, Chatsworth CA 91311

Tel. [phone] [phone] Fax [phone]

*All features and specifications are subject to change without notice.

All trademarks and registered trademarks are properties of their respective owners.

Gefen, LLC

www.gefen.com