Gefen EXT-HDMI1.3-242 User Manual

®

2x2 Switcher

®

for HDMI

EXT-HDMI1.3-242

User Manual

1.3

www.gefen.com

ASKING FOR ASSISTANCE

Technical Support:

Telephone [phone]
[phone]

Fax [phone]

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday PST

Write To:

Gefen, LLC.
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311

www.gefen.com
[e-mail]

Notice

Gefen, LLC reserves the right to make changes in the hard ware, packaging, and

any accompanying doc u men ta tion without prior written notice.

2x2 Switcher For HDMI 1.3 is a trademark of Gefen, LLC

HDMI, the logo, and High-Defi nition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing in the United States and

other countries.

© 2011 Gefen, LLC. All rights reserved.

All trademarks are the property of their respective owners.

Rev B4

CONTENTS

1 Introduction
2 Operation Notes
3 Features
4 Panel Layout
5 Panel Descriptions
6 Connecting And Operating The 2x2 Switcher For HDMI 1.3
7 IR Remote Control Description
8 IR Remote Installation
9 IR Remote Confi guration
10 IR Channel Confi guration
11 EDID Management
11 Internal EDID
12 External EDID
13 Specifi cations
14 Warranty

INTRODUCTION

Congratulations on your purchase of the 2x2 Switcher for HDMI 1.3. Your
complete satisfaction is very important to us.

Gefen

Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.

The Gefen 2x2 Switcher for HDMI 1.3

Gefen’s 2x2 Switcher for HDMI 1.3 is equipped with two HDMI inputs and two
HDMI outputs. Two inputs accommodate the simultaneous connection of up to
two high defi nition video sources, such as satellite systems and Blu-Ray players.
3D content can be displayed when connecting a 3DTV and 3D source. Two
outputs send the high defi nition audio/video signals to up to two HDTV displays.
Switching is done via the included IR remote.

How It Works

Connect all your sources to the 2x2 Switcher for HDMI 1.3 inputs. Then connect
up to two displays on the output ports. Once the sources, the switcher and the
displays are powered and connected, you then select which source you want to
view using the IR remote.

1

OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 2X2 SWITCHER FOR HDMI 1.3

• By default, display information from the display connected to HDMI output port
1 is sent back to the source. Therefore, the other display connected to the 2x2
Switcher for HDMI 1.3 must be capable of accepting the timings, resolutions
and audio formats of the display that is connected to HDMI output port 1. It is
recommended that the display with the lowest native resolution be connected
to HDMI output port 1. This is to ensure that a compatible video signal will
be able to be displayed on all connected monitors. There is a generic EDID
programmed into the 2x2 Switcher for HDMI 1.3 that can be used instead. See
page 1 1 for more details.

2

FEATURES

HDMI Features

• 225 MHz (up to 12 bit YUV 444 supported @ 1080p)

• Deep Color

• Dolby TrueHD and DTS-HD Master Audio

• Lip-Sync

• CEC Pass-Through

Features

• Easily switch between any two Hi-Def sources on up to two (2) HDTV
displays without signal loss

• Maintains sharp HDTV resolutions up to 1080p Full HD and 2K

• 3DTV Pass-Through

• Color Space Conversion

• EDID Management for rapid integration of sources and display devices.

• Mono-LOK™ Locking HDMI Connectors

• Supports the use of DVI sources and DVI displays with an HDMI-to-DVI
converter cable or adapter

• HDMI and HDCP compliant

Package Includes

(1) Gefen 2x2 Switcher for HDMI 1.3
(2) 6 ft. HDMI cables (M-M)
(1) IR Remote Control
(1) 5V DC Power Supply
(1) User Manual

3