Gefen EXT-HDMI1.3-143, EXT-HDMI1.3-144 User Manual

www.gefen.com

®

1:3 Splitter For

1.3

EXT-HDMI1.3-143

User Manual

ASKING FOR ASSISTANCE

Rev B

Technical Support:
Telephone [phone]
[phone]

Fax [phone]

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday PST

Write To:

Gefen Inc.
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311

www.gefen.com
[e-mail]

Notice

Gefen Inc. reserves the right to make changes in the hard ware, packaging and

any accompanying doc u men ta tion without prior written notice.

1:3 Splitter For HDMI 1.3 is a trademark of Gefen Inc.

© 2010 Gefen Inc., All Rights Reserved

All trademarks are the property of their respective owners

CONTENTS

1 Introduction
2 Operation Notes
3 Features
4 Panel Layout
5 Panel Descriptions
6 Connecting And Operating The 1:3 Splitter For HDMI 1.3
7 Specifi cations
8 Warranty

1

Congratulations on your purchase of the 1:3 Splitter For HDMI 1.3. Your complete
satisfaction is very important to us.

Gefen

Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.

The Gefen 1:3 Splitter For HDMI 1.3

The Gefen 1:3 Splitter For HDMI 1.3 allows set-top boxes, DVD players, and
other HDTV devices to be connected to three or more HDTV displays. When two
or more Splitters are connected together, they can be used to create a larger
video signal distribution.

This new unit supports HDMI 1.3 features and passes the higher bandwidth
HDMI 1.3 signal for the ultimate in state-of-the-art HDMI signal duplication.

How It Works

The 1:3 Splitter for HDMI 1.3 is connected using an HDMI cable from the HDMI
video source to the HDMI splitter input. There are three HDMI outputs. Each
output is connected to an HDMI display. Power is connected and all connected
displays show an exact replica of the video signal that is input to the Splitter.

Note: This HDMI product supports BOTH Audio and Video signals.
All displays that cannot show the same video resolution(s) as the Primary Display

connected to Output #1 may fail to show a picture. Secondary displays follow the
Primary by sharing the resolution and capability information (EDID) obtained from
the Primary Display.

INTRODUCTION