Gefen EXT-HDMI1.3-1410-BLK, EXT-HDMI1.3-1410-SIL User Manual

®

1:10 Splitter for

®

HDMI

EXT-HDMI1.3-1410-SIL

EXT-HDMI1.3-1410-BLK

User Manual

1.3

www.gefen.com

ASKING FOR ASSISTANCE

Technical Support:

Telephone [phone]
[phone]

Fax [phone]

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday, Pacifi c Time

Write To:

Gefen, LLC.
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311

www.gefen.com
[e-mail]

Notice

Gefen, LLC reserves the right to make changes in the hard ware, packaging and

any accompanying doc u men ta tion without prior written notice.

1:10 Splitter For HDMI 1.3 is a trademark of Gefen, LLC

HDMI, the logo, and High-Defi nition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing in the United States and

other countries.

© 2011 Gefen, LLC, All Rights Reserved

All trademarks are the property of their respective owners

Rev A2

CONTENTS

1 Introduction
2 Operation Notes
3 Features
4 Panel Layout
5 Panel Descriptions
6 Connecting And Operating The 1:10 Splitter For HDMI 1.3
7 EDID Management
9 Specifi cations
10 Warranty

INTRODUCTION

Congratulations on your purchase of the 1:10 Splitter For HDMI 1.3. Your
complete satisfaction is very important to us.

Gefen

Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.

The Gefen 1:10 Splitter For HDMI 1.3

The Gefen 1:10 Splitter For HDMI 1.3 allows set-top boxes, DVD players, and
other HDTV devices to be connected to up to ten HDTV displays. When two or
more Splitters are connected together, they can be used to create a larger video
signal distribution.

This new unit supports HDMI 1.3 features and passes the higher bandwidth
HDMI 1.3 signal for the ultimate in state-of-the-art HDMI signal duplication.

How It Works

The HDMI 1:10 Splitter is connected using an HDMI cable from the HDMI video
source to the HDMI splitter input. There are ten HDMI outputs. Each output is
connected to an HDMI display. Power is connected and all connected displays
show an exact replica of the video signal that is input to the Splitter.

1

OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE 1:10 SPLITTER FOR HDMI 1.3

• By default, display information from the display connected to HDMI output port
1 is sent back to the source. Therefore, the other displays connected to the 1:10
Splitter For HDMI 1.3 must be capable of accepting the timings, resolutions
and audio formats of the display that is connected to HDMI output port 1. It is
recommended that the display with the lowest native resolution be connected
to HDMI output port 1. This is to ensure that a compatible video signal will
be able to be displayed on all connected monitors. There is a generic EDID
programmed into the 1:10 Splitter For HDMI 1.3 that can be used instead. See
page 7 for more details.

2