Page 1
Related Products
_
DVI•1000ST
DVI•1000HD
Extends DVI up to 1640 feet (500 meters) over fiber optics cables.
The Gefen DVI-1000HD allows a single link video signal to be extended over long distances by
using multimode LC-LC fiber optic cable. Fiber Optics technology allows the DVI-1000HD to carry
video signals over long distances that would not be possible with traditional CAT5 extension. The
use of fiber optic cabling protects the video signal from electromagnetic interference (EMI) which
can degrade the video signal.
How It Works
The DVI•1000HDS sender unit sits next to your computer, set-top box or DVD player source.
Cables supplied with the DVI•1000HD connect your DVI source to the send unit. The
DVI•1000HDR receive unit sits next to your DVI display - up to 1640 feet (330 feet HDCP) away.
The display plugs into the back of the DVI•1000HDR receiver unit. One CAT-5 cable and a multi
mode LC fiber optic cable (4 strand) connect the DVI•1000HDS and the DVI•1000HDR units to
each other.
Note: The DVI•1000HD is HDCP compatible.
DVI, HDCP, & HDMI Defined
Features:
z Extends any DVI (digital visual interface) compliant device
up to 1640 feet/500 meters (330 feet with HDCP) from the computer
z Uses a four-strand multimode LC-LC fiber optic cable for video signals
z Uses one CAT-5 cable for DDC and control signals
z Eliminates computer noise where you work
z Supports resolutions up to 1080p, 2K, and 1920 x 1200
z Supports DDWG standard for DVI compliant monitors
z HDCP compliant
Specifications:
z Video Amplifier Bandwidth: 165 MHz
z Input Video Signal:1.2 volts p-p
z Input DDC Signal: 5 volts p-p (TTL)
z DVI Connector: DVI-D (19 pin) female
z Video Link Connector: LC
z DDC Link Connector: RJ-45 Shielded
z Power Supply: 12V DC
z Power Consumption: 36 watts (max)
z Dimensions: 3.25" D x 4.25" W x 1" H
z Shipping Weight: 5 lbs.
z Rack mountable: 1U rack space
Package Includes:
z DVI•1000HDS
z DVI•1000HDR
z One 12V Power Supply
z One 6 ft DVI-SL cable (M-M)
z User Manual
EXT-DVI-1000HD
Dystrybucja i sprzedaż: Meditronik Sp. z o.o.
02-952 Warszawa, ul. Wiertnicza 129, tel. (+48 22) 651-72-42, fax (+48 22) 651-72-46
http://www.meditronik.com.pl e-mail: office@meditronik.com.pl
Page 2
DVI • 1000HD
USER MANUAL
www.gefen.com
Page 3
ASKING FOR ASSISTANCE
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday.
Write To:
Gefen Inc.
C/O Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
support@gefen.com
www.gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hard ware, packaging and any
accompanying doc u men ta tion without prior written notice.
The DVI 1000 is a trademark of Gefen Inc.
© 2007 Gefen Inc., All Rights Reserved
Page 4
TABLE OF CONTENTS
1
Introduction
2
Front Panel Descriptions
3
Back Panel Descriptions
4
How To Connect The DVI 1000
5
How To Connect The DVI 1000 (w/o DDC)
6
DVI 1000 Wiring Diagram
7
Specifi cations
8
Warranty
Page 5
OPERATION NOTES
READ THESE NOTES BEFORE IN STALL ING
OR OPERATING THE DVI 1000
• The fi ber optics cable must be treated carefully when connectors are exposed. They
are susceptible to dust which can contribute to loss of pixels.
• The DVI 1000 works for all DVI displays and supports resolutions up to 1920x1200
• The DVI 1000 is housed in a metal box for better RF shielding.
• Supports DDWG standard for DVI compliant monitors
• Uses CAT-5 cable for HDCP/DDC and control signals.
Page 6
INTRODUCTION
Thank you for purchasing Gefen’ s ex•tend•it DVI 1000. The DVI 1000 allows extension
of DVI up to 1640 feet without losing any quality.
CONTENTS
The DVI 1000 consists of:
(1) DVI 1000S
(1) DVI 1000R
(1) DVI cable (6FT)
(1) 12VDC Power Supply
(1) User's Manual
1
Page 7
FRONT PANELS DESCRIPTIONS
DVI 1000 Sender (Front View Only)
Power LED indicates the unit is powered
Clock
Status LED indicates a link
between the sender and receiver
DVI 1000 Receiver (Front View Only)
Power LED indicates the unit is powered
Red
Green
HDCP & DDC Signals
Blue
Status LED indicates a link
between the sender and receiver
Red
Clock
2
Blue
HDCP & DDC Signals
Green
Page 8
BACK PANELS DESCRIPTIONS
DVI 1000 Sender (Rear View Only)
DVI Input
12 VDC Input
DVI 1000 Receiver (Rear View Only)
DVI Output
12 VDC Input
3
Page 9
HOW TO CONNECT THE DVI 1000
Connect the DVI 1000 sender unit to the DVI source using the supplied cables.
1
Connect the DVI 1000 receiver unit to your DVI display.
2
Connect the four fi ber optics and one CAT5 cable between the sender and receiver.
3
Plug the 12VDC power supplies into the DVI 1000 receiver.
4
You should see a beautiful picture.
5
* Cable Requirement - 50 or 62.5 micron multimode fi ber optics cable
4
Page 10
HOW TO CONNECT THE DVI 1000 (w/o DDC)
The DVI 1000HD can be hooked up without using the CAT5 if DDC is not needed. A
second power supply will be required to power the receiver unit in this setup.
For computer extensions where EDID is needed, a DVI Detective can be purchased to
store the EDID of the display.
Connect the DVI 1000 sender unit to the DVI source using the supplied cables.
1
Connect the DVI 1000 receiver unit to your DVI display.
2
Connect the four fi ber optics between the sender and receiver.
3
Plug the 12VDC power supplies into the DVI 1000 sender.
4
Plug the 12VDC power supplies into the DVI 1000 receiver.
5
If using a DVI Detective attach it in between the computer and the sender
6
You should see a beautiful picture.
7
* Cable Requirement - 50 or 62.5 micron multimode fi ber optics cable
5
Page 11
DVI 1000 WIRING DIAGRAM
6
Page 12
SPECIFICATIONS
Video Amplifi er Bandwidth ................................................................................. 1.65 GHz
Input Video Signal ......................................................................................... 1.2 volts p-p
Input DDC Signal .................................................................................... 5 volts p-p (TTL)
Single Link Range ......................................................................................... 1920 x 1200
DVI Input/Output Connector Type ........................................................................... DVI-D
Link Connector ........................................................................................................ RJ-45
Fiber Requirement ....................................................... 50 or 62.5 micron multimode fi ber
Power Consumption ................................................................................ 15 Watts (max.)
Power Supply ........................................................................................................ 12VDC
Dimensions .................................................................................. 3.25”D x 4.25 ”W x 1”H
Shipping Weight ....................................................................................................... 5 Lbs
7
Page 13
WARRANTY
Gefen Inc. warrants the equipment it manufactures to be free from defects in material
and workmanship.
If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year
from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment,
provided that the equipment has not been subjected to mechanical, electrical, or other
abuse or modifi cations.
Equipment that fails under conditions other than those covered will be repaired at the
current price of parts and labor in effect at the time of repair. Such repairs are warranted
for ninety (90) days from the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or fi tness for any particular purpose, all
of which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from Gefen.
3. Copper cables are limited to a 30 day warranty and cable must be free from any
scratches, markings, and neatly coiled.
The information in this manual has been carefully checked and is believed to be accurate.
However, Gefen Inc. assumes no responsibility for any inaccuracies that may be contained
in this manual. In no event will Gefen Inc., be liable for direct, indirect, special, incidental,
or consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. The technical information contained herein
regarding the DVI 1000 features and specifi cations is subject to change without notice.
8
Loading...