Gefen EXT-DPKVM-441 User Manual

®

4x1 DPKVM

Switcher

EXT-DPKVM-441

User Manual

www.gefen.com

ASKING FOR ASSISTANCE

Technical Support:

Telephone [phone]
[phone]

Fax [phone]

Technical Support Hours:

8:00 AM to 5:00 PM Monday thru Friday.

Write To:

Gefen LLC
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311

www.gefen.com
[e-mail]

Notice

Gefen LLC reserves the right to make changes in the hard ware, packaging and

any accompanying doc u men ta tion without prior written notice.

4x1 DPKVM Switcher is a trademark of Gefen LLC

© 2011 Gefen, LLC. All rights reserved.

All trademarks are the property of their respective owners.

Rev A2

CONTENTS

1 Introduction
2 Operation Notes
3 Features
4 Front Panel Layout
5 Front Panel Descriptions
6 Back Panel Layout
7 Back Panel Descriptions
8 IR Remote Control Unit
8 Layout and Description
9 Installing the Battery
10 Setting the IR Channel
11 Connecting the 4x1 DPKVM Switcher
11 Wiring Diagram
12 Operating the 4x1 DPKVM Switcher
12 Front Panel Buttons and LED Indicators
12 Switching sources using the front panel buttons
12 Switching sources using the IR Remote Control Unit
13 Switching sources using RS-232
13 Switching sources using Telnet
14 RS-232 Control
15 RS-232 Commands
15 IP Confi guration
20 General Commands
23 Routing Commands
24 Telnet Control
26 Firmware Update
27 Rack Ear Installation
28 Specifi cations
29 Warranty

INTRODUCTION

Congratulations on your purchase of the 4x1 DPKVM Switcher. Your complete
satisfaction is very important to us.

Gefen

Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.

The Gefen 4x1 DPKVM Switcher

Easily switch between four computers using DisplayPort with the Gefen 4x1
DPKVM Switcher.

The rack-mountable Gefen 4x1 DPKVM Switcher offers an economical solution
for switching between four different computers to one display location. In addi­tion, USB peripherals and audio are carried at the same time from each source
making this a very versatile solution.

Eliminating the need to purchase many displays, keyboards and other acces­sories for each computer in a studio or professional environment, this versatile
solution saves money, supports both Mac and PC-type computers, and offers
uncluttered and increased desktop space.

The 4x1 DPKVM Switcher outputs are: One DisplayPort, two USB 2.0 ports
(used for keyboard, mouse and other USB 2.0 peripherals) and an analog L/R
audio. This Switcher can be controlled using front panel discrete switching, the
included IR Remote control, or the RS-232 port for switching automation.

The 4x1 DPKVM Switcher is compatible with all operating systems using Display­Port and USB.

How It Works

Connect the four included 6-foot DisplayPort cables between the computers
and the Switcher inputs. Connect the four included USB cables between the
computers and the USB inputs. Connect the four included audio cables between
the computers and the audio inputs. Connect the Switcher output to the monitor
using a DisplayPort cable. Connect the Switcher USB outputs to the USB pe­ripherals. Connect the Switcher audio cables to the audio devices. Connect the
included 5V DC locking power supply to the 4x1 Switcher and connect the AC
power cord to an available electrical outlet. The currently selected source will be
displayed.

1

OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE 4X1 DPKVM SWITCHER

• The 4x1 DPKVM Switcher supports Pass-through EDID. The Switcher will
use the EDID from the monitor connected to the output.

• Dual Link resolutions up to 2560 x 1600 are supported.

• HDCP content is not supported.

• This Switcher does not support DHCP.

• The default IR channel for both the Switcher and the IR Remote Control Unit
is channel 0. See page 10 for more information.

2

FEATURES

Features

• Front panel switching using discrete select buttons

• Supports resolutions up to 2560 x 1600

• Supports RGB and YCbCr color spaces

• RS-232 control

• IP control

• IR remote control

• Supports USB 2.0 with backward-compatibility for USB 1.1

• Jack for external IR Receiver (EXT-RMT-EXTIR)

• Save space on your desktop

• Rack-mountable

Package Includes

(1) 4x1 DPKVM Switcher
(4) 6 ft. DisplayPort cables
(4) 6 ft. USB 2.0 cables (A - B)
(4) 6 ft. 3.5 mm mini-stereo audio cables
(1) IR Remote Control Unit (EXT-RMT-4IR)
(1) 5V / 4A DC Locking Power Supply (EXT-PS54AULP)
(1) Set Rack ears
(1) User Manual

3

FRONT PANEL LAYOUT

4

Front Panel

21 3

4

FRONT PANEL DESCRIPTIONS

1 Input Indicators (1 - 4)

Each of these LED indicators glows bright blue according to the input selection
(see Input Buttons, below)

2 IR

Receives IR signals from the included IR Remote Control Unit.

3 Input Buttons (1 - 4)

Pressing each of these buttons selects the desired input source (1-4).

4 Power

This LED indicator will glow bright red when the unit is powered.

5

BACK PANEL LAYOUT

52

3 4

Back Panel

89 67

1 10

6

BACK PANEL DESCRIPTIONS

1 5V DC

Connect the included 5V DC locking power supply to this receptacle.

2 DP In 1 - In 4

Each of these ports will accept a standard DisplayPort source device.

3 Ext IR

Connect an IR extender cable to this port.

4 USB Out (1 - 2)

Connect USB devices (e.g. mouse devices, keyboards, etc.) to these ports.

5 Ethernet

Use an Ethernet cable to connect the Switcher to a network in order to
communicate via Telnet.

6 RS-232 Serial Port

This port is used for serial communication using an RS-232 control device. For
details, refer to page 14.

7 USB In (1 - 4)

Connect USB source devices to these ports.

8 DP Out

This port will accept a single standard DisplayPort output device. The currently
selected DisplayPort input source will be output via this port.

9 Audio Out

Connect an audio output device to this connector using a 3.5 mm mini-stereo
cable. The audio output will be for the currently selected input source.

10 Audio IN

Connect audio source device to this port using the 3.5 mm mini-stereo cable.

7