![](/html/2e/2e7f/2e7fbd7b5a2e7e5a193ace7fe2111c0b1ada0efb795b6b762edd18094a08d146/bg2.png)
ASKING FOR ASSISTANCE
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday Pacifi c Time
Write To:
Gefen, LLC
C/O Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
support@gefen.com
www.gefen.com
Notice
Gefen, LLC reserves the right to make changes in the hard ware, packaging and any
accompanying doc u men ta tion without prior written notice.
Composite Video Extender is a trademark of Gefen, LLC
All trademarks are the property of their respective owners.
© 2011 Gefen, LLC. All rights reserved.
All trademarks are the property of their respective owners.
Rev A3
![](/html/2e/2e7f/2e7fbd7b5a2e7e5a193ace7fe2111c0b1ada0efb795b6b762edd18094a08d146/bg3.png)
TABLE OF CONTENTS
1
2
3
4
5
6
7
INTRODUCTION
FEATURES
INSTALLATION INSTRUCTIONS
CAT5 WIRING DIAGRAM
WIRING DIAGRAM
SPECIFICATIONS
WARRANTY
![](/html/2e/2e7f/2e7fbd7b5a2e7e5a193ace7fe2111c0b1ada0efb795b6b762edd18094a08d146/bg4.png)
INTRODUCTION
Thank you for purchasing the Composite Extender by Gefen, LLC.
The Composite Extender allows users to extend Composite video signals beyond the A/V
rack. The Composite Extender Series can be used to extend a Composite signal to cover
the distances up to 1000 feet. Industry standard Category 5e (CAT-5e) cable is used for
the extension.
HOW IT WORKS
The Composite Extender sender resides next to the TV source. With the supplied
Composite cable, the Composite Extender sender is connected to the source. The
Composite Extender receiver is then placed next to the monitor or projector. Industry
standard Category 5e (CAT-5e) cable is used to link the Composite Extender send er and
Composite Extender re ceiv er together.
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING
OR OPERATING THE COMPOSITE EXTENDER SYSTEM
• Use industry standard Category-5e (CAT-5e) cable to operate the Composite Extender
system. CAT-5e cable is preferred.
• Please connect all the cables between the source and the Composite Extender before
powering up the Composite Extender unit.
• The Composite Extender units are housed in a metal box for better RF shielding.
1