Gefen 4x4 Component Audio Matrix, EXT-COMPAUD-444 User Manual

Four Component Sources

to Four Displays. Independently.

Connect and Access Any Four (4)

Hi Def. Sources to Any Four Hi Def. Displays

The 4x4 COMPONENT Matrix routes high definition
video in multiple resolutions up to 1080p plus stereo
audio from any of the four Component /Audio sources to
four displays. Any four Component / Audio sources to any
four displays using matrix switching allows for maximum
versatility for integrated systems. The 4x4 Component /
Audio matrix eliminates the need to disconnect and
reconnect sources or displays. It works with DVD players,
DVR systems, HT PCs, and satellite set top boxes that
connect via component to displays. Every source is
accessible at all times by any display by routing it using
an IR remote or RS232 smart control devices.

How It Works

You simply connect the four component and audio sources
to the Matrix's inputs. Then connect four displays to the
Matrix's outputs. Once the sources, the matrix and the
displays are powered and connected, you simply select
which sources you want view on which displays using the
IR remote or RS232 smart control devices.

Note: This Component/Audio product supports BOTH
Audio and Video signals, If used in conjunction with the
EXT-COMPAUD-141 it will extend component video and
audio up to 1000 feet (300 meters) using one CAT-5e
cable

EXT-COMPAUD-444

Features:

Switch easily between any four component /audio sources
Distributes any of the 4 inputs to any or any combination of the 4 displays
Maintains high resolution video - beautiful, sharp HDTV resolutions

up to 1080p
Discrete IR remote (included)
Serial RS-232 remote port
Rack ears included
Local selection from the front panel

Specifications:

Video Amplifier Bandwidth: 350 MHz
Input Video Signal: 1.2 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Horizontal Frequency Range: 15-70 Khz
Vertical Frequency Range: 30-170 Hz
Video In/Out: RCA Component
Audio In/Out: RCA Stereo
Remote Control Port: RS232 female, mini-stereo
Power Supply: 12V DC
Power Consumption: 20 watts (max.)
Dimensions: 17"W x 1.75"H x 5.875"D
Shipping Weight: 10 lbs.

Dystrybucja i sprzedaż: Meditronik Sp. z o.o.
02-952 Warszawa, ul. Wiertnicza 129, tel. [phone], fax [phone]

http://www.meditronik.com.pl e-mail: [e-mail]

4x4 Component

Audio Matrix

USER MANUAL

www.gefen.com

Technical Support:
Telephone [phone]
[phone]

Fax [phone]

Technical Support Hours:

8:00 AM to 5:00 PM Monday through Friday.

Write To:

Gefen Inc.
C/O Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311

www.gefen.com
[e-mail]

Notice

Gefen Inc. reserves the right to make changes in the hard ware, packaging and any

accompanying doc u men ta tion without prior written notice.

The 4x4 Component Audio Matrix is a trademark of Gefen Inc.

© 2007 Gefen Inc., All Rights Reserved

ASKING FOR ASSISTANCE

TABLE OF CONTENTS

Introduction / Operation Notes
Features
Panel Layout
Using the 4x4 Component Audio Matrix
RMT16-IR Installation
RS-232 Interface
4x4 Component Audio Matrix Rack Mount Diagram
Specifi cations
Terminology
Warranty

1

2

3

4

5

6

7

8

9

10