www.gefen.com
DVI FM1000
Extender
EXT-DVI-FM-1000
User Manual
www.gefen.com
Extender
EXT-DVI-FM-1000
User Manual
Manu
al
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday.
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
support@gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying
doc u men ta tion without prior written notice.
DVI FM1000 Extender is a trademark of Gefen Inc.
© 2008 Gefen Inc., All Rights Reserved
All trademarks are the property of their respective companies
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday.
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
support@gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying
doc u men ta tion without prior written notice.
DVI FM1000 Extender is a trademark of Gefen Inc.
© 2008 Gefen Inc., All Rights Reserved
All trademarks are the property of their respective companies
ASKING FOR ASSISTANCE
CONTENTS
4 Panel Layout
5 Connecting And Operating The DVI FM1000 Extender
6 Specifi cation
7 Warranty
1 Introduction
2 Operation Notes
3 Features
4 Panel Layout
5 Connecting And Operating The DVI FM1000 Extender
6 Specifi cation
7 Warranty
1
1
INTRODUCTION
integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-and-play products
supplement cross-platform computer systems, professional audio/video environments and HDTV
systems of all sizes with hard-working solutions that are easy to implement and simple to operate.
The Gefen DVI FM1000 Extender
The DVI-FM1000 Extender extends your DVI display up to 3,280 feet (1km) away from your video
source, with only two tiny transceivers required, using a 100% optical SC fi ber solution with a single
strand of fi ber optic cable. It’s a great way to extend DVI video easily and unobtrusively.
How It Works
The DVI-FM1000 sender unit plugs into your computer. The DVI FM1000 receiver unit plugs into your
DVI display. A single strand of multimode SC fi ber optic cable connects the Sender and the Receiver
units to each other.
Congratulations on your purchase of the DVI FM1000 Extender. Your complete satisfaction is very
important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions that harness
integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-and-play products
supplement cross-platform computer systems, professional audio/video environments and HDTV
systems of all sizes with hard-working solutions that are easy to implement and simple to operate.
The Gefen DVI FM1000 Extender
The DVI-FM1000 Extender extends your DVI display up to 3,280 feet (1km) away from your video
source, with only two tiny transceivers required, using a 100% optical SC fi ber solution with a single
strand of fi ber optic cable. It’s a great way to extend DVI video easily and unobtrusively.
How It Works
The DVI-FM1000 sender unit plugs into your computer. The DVI FM1000 receiver unit plugs into your
DVI display. A single strand of multimode SC fi ber optic cable connects the Sender and the Receiver
units to each other.
unit is supplied by the source device. If the LED on the transmitting unit does not activate once the
source is connected and powered, please plug the included power adapter into the transmitting
unit instead of into the receiving unit.
The EDID from the display is stored in the transmitting unit but must be recorded from the display •
fi rst. Please see instructions on page 5 for the proper EDID recording procedure.
The following are the resolution and maximum distance ratings. Usage that exceeds these limits •
will produce unexpected results.
1920 x 1200 will be extended up to 300m (990ft)
1600 x 1200 will be extended up to 500m (1,650ft)
1280 x 1024 will be extended up to 1000m (3,280 ft)
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE DVI FM1000 EXTENDER
DVI FM1000 Extender can only be operated with multi-mode SC terminated fi ber optic cable.•
The supplied power adapter must only be used on the receiving unit. Power for the transmitting •
unit is supplied by the source device. If the LED on the transmitting unit does not activate once the
source is connected and powered, please plug the included power adapter into the transmitting
unit instead of into the receiving unit.
The EDID from the display is stored in the transmitting unit but must be recorded from the display •
fi rst. Please see instructions on page 5 for the proper EDID recording procedure.
The following are the resolution and maximum distance ratings. Usage that exceeds these limits •
will produce unexpected results.
1920 x 1200 will be extended up to 300m (990ft)
1600 x 1200 will be extended up to 500m (1,650ft)
1280 x 1024 will be extended up to 1000m (3,280 ft)
OPERATION NOTES
2
2
3
3
FEATURES
Uses inexpensive and widely available single-strand multimode SC fi ber optic cable•
Automatic EDID Programming feature enables quick and correct sync of source to display •
Invulnerability to electromagnetic infl uences (EMI), thanks to all-fi ber construction.•
Saves space on your desktop and Increases Productivity•
Eliminates computer noise where you work •
Supports DDWG standard for DVI compliant monitors •
Package Includes
(1) DVI FM Sender Unit
(1) DVI FM Receiver Unit
(2) 5V DC 1A Power Supply
(1) User’s Manual
Features
Extends any DVI (Digital Visual Interface)-compliant device up to 3,280 ft (1km) from the computer•
Supports video resolutions up to 1080p, 2K, and 1920 x 1200•
Uses inexpensive and widely available single-strand multimode SC fi ber optic cable•
Automatic EDID Programming feature enables quick and correct sync of source to display •
Invulnerability to electromagnetic infl uences (EMI), thanks to all-fi ber construction.•
Saves space on your desktop and Increases Productivity•
Eliminates computer noise where you work •
Supports DDWG standard for DVI compliant monitors •
Package Includes
(1) DVI FM Sender Unit
(1) DVI FM Receiver Unit
(2) 5V DC 1A Power Supply
(1) User’s Manual
4
4
PANEL LAYOUT
Sender Front Panel Receiver Front Panel
Sender Back Panel Receiver Back Panel
Sender Back Panel Receiver Back Panel
Back Panel
Back Panel
Back Panel
Back Panel
DVI In
DVI In
Optical
Cable Input
Optical
Cable Input
5V DC
Input
5V DC
Input
5V DC
Input
5V DC
Input
Optical
Cable Input
Optical
Cable Input
DVI Out
DVI Out
5
5
CONNECTING AND OPERATING THE DVI FM1000 EXTENDER
user/monitor supplied DVI cable.
Power on the display.2.
Insert the included 5V DC power adapter into the sending unit. The LED on the top panel of the unit 3.
will begin to fl ash rapidly. Once the LED stops fl ashing and is solid, the monitors EDID will have been
successfully recorded.
Disconnect the power adapter from the DVI FM1000 Extender sending unit, and then disconnect the DVI 4.
FM1000 Extender sending unit from the display.
Connecting the DVI FM1000 Extender System
Connect the DVI FM1000 Extender sending unit (Output is marked as COMPUTER) to the DVI source 1.
device.
Connect DVI FM1000 Extender receiving unit (Output is marked as MONITOR) to the DVI display.2.
Connect the DVI FM1000 Extender sending and receiving units together using a user supplied SC 3.
terminated multi-mode fi ber optic cable.
NOTE: This unit will only operate with SC terminated multi-mode fi ber optic cable.
Connect the included 5V DC power adapter to the DVI FM1000 receiving unit.4.
Power on the DVI source.5.
NOTE: If the source does not supply the required 5V to the DVI FM1000 Extender sending unit, the power
supply must be attached to the sending unit and not the receiving unit.
How to Connect the DVI FM1000 Extender
EDID Recording
Display information (EDID) contains resolution and timing information for your display. This information is needed
by the source for proper video output. Follow these steps to record the EDID of the display into the sending unit.
If you know that EDID is not required by the source the followings steps for recording will not be necessary.
Connect the DVI FM1000 Extender sending unit (output is marked as COMPUTER) to the display using a 1.
user/monitor supplied DVI cable.
Power on the display.2.
Insert the included 5V DC power adapter into the sending unit. The LED on the top panel of the unit 3.
will begin to fl ash rapidly. Once the LED stops fl ashing and is solid, the monitors EDID will have been
successfully recorded.
Disconnect the power adapter from the DVI FM1000 Extender sending unit, and then disconnect the DVI 4.
FM1000 Extender sending unit from the display.
Connecting the DVI FM1000 Extender System
Connect the DVI FM1000 Extender sending unit (Output is marked as COMPUTER) to the DVI source 1.
device.
Connect DVI FM1000 Extender receiving unit (Output is marked as MONITOR) to the DVI display.2.
Connect the DVI FM1000 Extender sending and receiving units together using a user supplied SC 3.
terminated multi-mode fi ber optic cable.
NOTE: This unit will only operate with SC terminated multi-mode fi ber optic cable.
Connect the included 5V DC power adapter to the DVI FM1000 receiving unit.4.
Power on the DVI source.5.
NOTE: If the source does not supply the required 5V to the DVI FM1000 Extender sending unit, the power
supply must be attached to the sending unit and not the receiving unit.
6
6
SPECIFICATIONS
DVI Connector .................................................................................................... Type DVI-D (19 pin) male
Link Connector ....................................................................................................................................... SC
Power Supply ................................................................................................................................... 5V DC
Power Consumption .......................................................................................................... 2.5 Watts (max.)
Dimensions .................................................................................... 2.6” D x 0.6” H x 1.6”W per transceiver
Shipping Weight ................................................................................................................................. 5 lbs.
Video Amplifi er Bandwidth ....................................................................................... 165 MHz (Single Link)
Input Video Signal ................................................................................................................... 1.2 Volts p-p
Input DDC Signal .............................................................................................................. 5 Volts p-p (TTL)
DVI Connector .................................................................................................... Type DVI-D (19 pin) male
Link Connector ....................................................................................................................................... SC
Power Supply ................................................................................................................................... 5V DC
Power Consumption .......................................................................................................... 2.5 Watts (max.)
Dimensions .................................................................................... 2.6” D x 0.6” H x 1.6”W per transceiver
Shipping Weight ................................................................................................................................. 5 lbs.
Loading...