Gefen DVI-2-HDSDISP User Manual
DVI to HD-SDI
Scaler PLUS
USER MANUAL
www.gefen.com
ASKING FOR ASSISTANCE
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday through Friday PST
Write To:
Gefen Inc.
C/O Customer Service
20600 Nordhoff Street
Chatsworth, CA 91311
www.gefen.com
support@gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hard ware, packaging and any
accompanying doc u men ta tion without prior written notice.
The DVI to HD-SDI Scaler PLUS is a trademark of Gefen Inc.
© 2007 Gefen Inc., All Rights Reserved
© 2005 Gefen Inc., All Rights Reserved
1
Introduction
2
Operation Notes
3
Panel Descriptions
4
Menu Functions
6
Supported Input/Output Resolutions
7
RMT-8HDS-IR Installation
8
Firmware Update Procedure
9
Specifi cations
10
Warranty
TABLE OF CONTENTS
INTRODUCTION
Gefen's DVI to HD-SDI Scaler PLUS is the newest revision of our HDSDI conversion
line incorporating full single link DVI-D conversion scaled up to SD/HDSDI. Resolutions
of up to 2K (2048x1080/60) are supported over the HDSDI link for those that want
true “High Defi nition”. Performance has been greatly enhanced due to Gennum’s
VXP Scaler onboard; allowing for new features such as: Genlock capability, Color &
Gamma Correction, Noise Reduction, Detail Enhancement, Aspect Ratio Selection,
Pattern Generator Mode & Multiple Language Menu Support. Bottom Line? -- More
performance, less cost.
HOW IT WORKS
DVI devices are connected to the DVI input and SDI devices are connected to the SDI
output. When the source, display and the Scaler are powered and connected, video
signals are converted to the proper format.
CONTENTS
The DVI to HD-SDI Scaler PLUS consists of:
(1) DVI to HD-SDI Scaler PLUS
(1) 6 foot DVI Cable (m-m)
(1) RMT-8HDS-IR Remote Control
(1) 5V DC Power Supply
(1) User's Manual
1
Loading...